1.Scope of application cutting fluid, tensile emulsion, cold rolling emulsion, semi-synthetic coolant, fully synthetic coolant, cleaning fluid. 2.Working principle When the cutting fluid is sent into the equipment through the oil transfer pump, when the cutting fluid and impurity particles enter the separation rotor, they are subjected to strong centrifugal force (up to 2000 times the gravity of the impurity self weight), the cutting fluid and impurities move radially to the internal surface of the rotor, and the cutting fluid and impurities are compressed into a thick layer. Due to the different effects of centrifugal force, the cutting fluid flows back to the transfer tank along the reflux tank, and the impurities are adsorbed to the inner surface of the separator and gradually solidified, so as to separate the impurities from the cutting fluid and continuously improve the cleanliness of the cutting fluid. 3.Technical parameters Model Number:LC-SJ-HWM-G Scope of application:Water-Based Filtration Method:Centrifugal Separation Slag Discharge Mode:Automatic Slag Discharge Start Mode:Soft Start Power Supply Data:Three Phase AC 38V 50Hz Total Power (Kw):48 Control Panel:Siemens Touch Panel Drum Capacity (L):20 Drum Speed (r/min):11600 Centrifugal Effect:99% Working Pressure (Mpa):0.4 Working Noise:â?¤75 dB(A) Maximum Handling Capacity:6000 Recommended Flow (L/H):6000 Working Temperature For Oil ():45 Oil Content After Purification:
