Copper Mould Tube & Plate We specially in supplying Copper Mould Tube, Crystallizing equipment of continuous casters, Mould cooling jacket, Repair of Metallurgical Copper Mould Tube, etc. Equipments & Spare parts for Continuous Casting Machine. 1. Copper mould tube( square, rectangle and round ) 2. Crystallizing equipment of continuous casters 3. Mould cooling jacket. 4. repair of copper tube moulds COPPER MOULD ALLOYS The copper alloys chosen for the moulds must maintain their physical properties at the operating temperatures of the continuous casting process. The temperature gradation from the inner wall of the mould to the outside face of the mould can cause serious distortion problems, and Metallurgical Copper Mould Tube is imperative that the correct alloy is chosen for the various operating conditions. Square Copper mould tube STANDARD MATERIALS Phosphorus de-oxidised copper This alloy has been proven to be excellent for the manufacture of moulds in the continuous casting of billets. The main composition of this alloy are Cu +Ag 99.90min, P0.0015 / 0.040. Copper -Silver alloy The addition of a small amount of silver, whilst not increasing the melting point of copper, does increase the recrystallisation temperature by almost 100â??, and also helps to give better thermal conductivity at the operating temperatures. This alloy is normally used in moulds for the continuous casting of blooms and slabs .In this case, the moulds are much thicker than in the billet moulds, and the moulds temperature can be higher. The main composition of this alloy are Cu+Ag99.90 min. Ag 0.08 / 0.12 O 0.004 / 0.012.
