For different thickness material continuous punching use Work together with uncoiler machine for automatic production Can be customized Feature: 1. It is updated product of H series straightener specially designed for punching super thin products. As we all know, coil material can not produce good products without flattening and stress relieving treatments; therefore, the performance of the straightener is critical in the production process. 2. The flattening and the straightening secondary wheels adopt imported SUJ2, milling after HRC60° heat treatment and starts production after plating the hard chrome to ensure the evenness of the chrome layers and the form tolerances of each bearing. 3. The flattening adjusting adopts the floating four-point balancing equipment, with the dial indicator which can find the leveling point rapidly. 4. Every straightening wheel of S series precision straightening machine is equipped with leveling assistant wheel to ensure that it will not be bent in the production process, thus improving the flatness quality of products. 5. The fixed type of auxiliary roller improves the rigidity of the lower wheel and prevents deformation under force. 6. The upper auxiliary roller is of floating type, to obtain different pressure according to needs, strengthen the leveling strength life of leveling wheel and improve the flatness requirement of plate surface. 7. The transmission gear is lubricated by forced cycle immersion oil, which can reduce the wear of the gear and work under high temperature for a long time. 8. The transmission mechanism adopts synchronous and independent transmission for each leveling roller, which reduces the side clearance tolerance accumulated by gear group transmission and improves the flatness requirement of plate. 9. The addition of lubrication system can prolong the life of the machine and keep the machine in stable working state for a long time. 10. Because material is qualitative, makings width and makings thick different, do not have unified numerical reference so, because this suggests, take before large quantities of production small segment material tries correction first, wait for after achieving the effect again successive production. 11. Universal energy saving drive, high performance aluminum and stainless steel straighteners.
