AIGI 350G Steamed Aramid Fiber Sheets
AIGI 350G consists of special steamed aramid fibers and stretch binders.
They make excellent gaskets, especially in steam applications.
AIGI 36
Virgin PTFE Sheets
Features & Benefits
Excellent corrosion resistance
Widely used in most applications
Ideal choice for replacing asbestos material
AIGI 126
Glass Fiber Reinforced PTFE Sheets
Features & Benefits
Avoids creep relaxation and emission
Improved chemical resistance
Improved hardness
Excellent deformation resistance
AIGI 141 NBR Sheets
AIGI 141, Nitrile Rubber has outstanding heat resistance which makes it can be used under 120°C atmosphere
for a long time. Meanwhile, AIGI 141 has a high gas-tightness ability too. While NBR is not suitable under low
temperature and it gets a low dielectric property.
AIGI 141 NBR sheets are used under Alpha Olefin Lube; Ethylene glycol; hydrocarbon fuel; Silicon oil; Grease;
water; water-based engine cooling liquid; etc..
AIGI 142 FR Sheets
AIGI 142, Fluorubber could work under high temperature, oxidize and most of liquid, also with an excellent
physical-mechanical properties; which makes AIGI 142 be used in a wide range of industrial applications, like
alcohols lube; petroleum liquid; Sulphosuccinic acid ester liquid; etc..
AIGI 144 Neoprene Sheets
AIGI 144 Neoprene sheet has outstanding weatherability, excellent resistance to oil and ozone; and excellent
adhesiveness which makes it one of the best gasket materials in the sealing industry.
AIGI 144 could be widely used in silicon oil; grease; low temp. water and water-soluble; refrigerants; ammonia
water; CO2; ozone; etc..
AIGI 146 EPDM Sheets
AIGI 146 EPDM could withstand low temperature, and has good resistance to light aging and alkali. It has
excellent electrical insulation ability.
AIGI 146 could be used in alcohol; dilute acid; brake fluid; hot/cold water; ketone; ozone; silicon resin liquid or
steam under 200°C.
AIGI 147 Silicon Rubber Sheets
AIGI 147 Silicon Rubber Sheets could stand for high and low temperature, stable physical properties at a wide
temperature range: -60°C~250°C. It also offers ozone resistant and weatherability.
It is used under air; Ethylene glycol; ozone; UV rays; etc..
Supplier: Three decades manufacturer of bags, garment footwear and household &home textile,
trade of mineral, chemical and foods.
excellent at organic cotton, wool, bamboo fiber , grs certifited recycled materila. nature and eco friendly , skin care , rubber parts, rug & mat, cotton polycotton towel, hand towel, kitchen ,cotton, canvas, polyester, nylon, nonwoven, pp woven, made bag ,pp woven jumbo bag, canvas jumbo bag, fibc bag
Services: Design, manufacture, shipping, logistic, after service.
Parameter: Item Style Abt-1610l Abt-1610m Abt-1610h Density g/cm3 1.8~2.0 1.8~2.0 1.8~2.0 Tensile strength í²mpa 6 9 12.5 Compressibilityí²% 12ía5 12ía5 12ía5 Recoveryí²% 40 45 45 Aging coefficient 0.9 0.9 0.9 Stress relaxation ín% 45 45 45 Steam sealing Tmax: 200 Pmax: 2~3mpa 30min No shock Tmax: 300 Pmax: 4~5mpa 30min No shock Tmax: 400 Pmax: 8~9mpa 30min No shock Tmax: 200 300 400 Pmax: mpa1.5 3.0 5.0 Resistance To media Water, seawater, steam, fuel, gases, salt solutions And many other media. Pallet
We deals in the following Chemicals :- Magnetite, Cellulose Fibers, Cellophane Flakes, Walnut Shells Calcium Carbonate Powder Alumina Silica ( Cenosphere ) Powder Fly Ash Powder Ilmenite (Synthetic Rutile) Hematite / Iron Oxide Powder, Iron Oxide ( Ferric Oxide ) Barite Powder, Barite Ore Dolomite Powder Mica Powder, Mica Flakes, Mica Blocks, Mica Sheets Quartz / Silica Powder, Quartz / Silica Lumps, Quartz / Silica Granules, Quartz / Silica Grits Bentonite Powder, Bentonite Lumps, Bentonite Granules, Bentonite Clay
LATEX CONCENTRATE (HA) TYPE Natural rubber latex concentrate (HA) is a high ammonia centrifuged concentrated latex of the sap of Hevea brasiliensis trees. This general purpose type latex finds its application in a variety of products. APPLICATION HA latex is the most widely used form of concentrate and has the advantage that the only preservative (ammonia) it contains is volatile. Hence it may be used confidently in food applications and for medical goods. HA latex concentrate has wide applications especially in the dipped products like medical or industrial gloves, balloons, condoms, catheters, finger cots, tubing, etc. It is also used as an adhesive for footballs, bandages, in wood lamination and for binding different types of materials. It gives excellent films of high clarity and has good adhesion characteristic. STORAGE Store the product under shelter at temperatures between 10�°C and 35�°C Creaming of latex may occure during storage. It is therefore necessary to stir well the latex before used. As the product is based on natural rubber latex changes in colloidal properties may occur on storage. TYPICAL PROPERTIES Total Solids Content (TSC), % 61.00 min Dry Rubber Content (DRC), % 60.00 min Non Rubber Content (NRC ), % 1.70 max Ammonia Content (on total weight), % 0.65-0.75 pH Value 11.00 max KOH Number 0.70 max Volatile Fatty Acid Number 0.05 max M.S.T. @55% TSC, sec. 650 min Magnesium Content, (on solids), ppm 40 max HANDLING PRECAUTION Before handling, read product information, chemical safety data sheets and container label for safe use, physical and health hazard information. PACKING Available in both bulk and drum.
Material: Made of asbestos fibre, rubber and heat-resisting packing material, compressing it to thick paper . Uses: Used for the equipment in water, steam, etc.And used as sealing material in the joints of pipeline Working pressure : 0.8 mpa, max working temperature: 150¡æ Sizes: 4100 x 1500 x (0.5 ¨c 6.0)mm, 2000 x 1500 x (0.5 ¨c 6.0)mm, 1500 x 1360 x (0.5 ¨c 6.0)mm, 3810 x 1270 x (0.5 ¨c 6.0)mm 1270 x 1270 x (0.5 ¨c 6.0)mm, 1500 x 1500 x (0.5 ¨c 6.0)mm The other size is optional or according to the requirements of customers. Packing: in wooden pallet of about 1000 kgs, 2000kgs net each.
Construction: Double-face tanged cs + asb beater It is a composite from asbestos beater sheet reinforced with single tanged 0.2-0.25mm carbon steel on double-face Application: It is extensively applied in manufacturing various exhaust gaskets for automobile and motorcycle etc. Dimensions: 500x1000mm, 500x500mm Thickiness:1.2~2.5mm Pallet
Item Style Abt-1700l Abt-1700m abt-1700h abt-1700ch Tensile strengthí²mpa 9 12 15 19 Aging coefficient 0.9 0.9 0.9 0.9 Loss on ignitionín% 30 30 28 28 Compressibilityí²% 12ía5 12ía5 12ía5 12ía5 Recoveryí²% 40 40 45 45 Density g/cm3 1.6~2.0 Tmax: 0c 200 300 400 450 Pmax: mpa 2.3 3.5 5.0 6.0 Resistance To media Water, seawater, steam, diluted acid & alkali, gases, alcohols, salt solutions etc. Under temperature and pressure. Pallet
Asbestos rubber sheet Got asbestos rubber sheet is made from selected asbestos fiber, natural rubber, filling material and dye. A price worthy quality of dependable performance, in addition, being suited to many sealing requirements makes this jointing the most economical sheet packing choice in the wide range of industrial fields. Service range: Item Style 680 680-1 680-2 680-3 Tensile strengthí²mpa 9 12 15 19 Aging coefficient 0.9 0.9 0.9 0.9 Loss on ignitionín% 30 30 28 28 Compressibilityí²% 12ía5 12ía5 12ía5 12ía5 Recoveryí²% 40 40 45 45 Density G/cm3 g/cm3 1.6~2.0 Tmax: 0c 200 300 400 450 Pmax: mpa 2.3 3.5 5.0 6.0 Resistance to media The jointing parts of equipments and pipelines and flanges using water, steam, diluted acid & alkali, etc. As the medium, under the responding grade temperature and pressure. Lower grade on request Available color: purple, red, black, grey etc. Available with inner lined iron wire mesh, copper wire mesh, or 316.304 steel wire mesh, etc. Also available with graphite coating or anti-stick With single face your logo on request Normal dimension: Thickness: 0.4~5mm 20001500mm; 15004000mm; 15001500mm;1350x1500mm 15001000mm;12701270mm; 38101270mm 38102700mm ú¿newú¬ Wooden case
Non Asbestos Clutch Facings are made from specially prepared vulcanized rubber with special purpose dress yarn. The result of above is a product with stable coefficient of friction at varying temperatures, reduced wear, no judder with smooth driving characteristics. The raw materials and finished products are tested at the in house Testing Lab to ensure more uniformity and consistency in the product.
