Clamp Flexible Rubber Joint

S10 Series Rubber Flexible Joint PN16 Flanged Single Ball Type Features and Benefits High impact resistance rubber with nylon wire and stainless steel wire, is able to bear high pressure flows without anyinfluence on the product tensile strength. High reliability: 100000 times bending fatigue test, to make sure the long life cycle. Flexible rubber, to protect the pipeline from shake. Applicable Standards Connection standard: EN1092-2 Pressure test standard: EN12266, API598 Face to face standard: Conex Banninger Standard Technical Data Nominal Diameter:DN50~DN600(2"~24") Nominal pressure: PN16 Temperature range: -5C ~ 85C Suitable for: Water, ethylene glycol,non correction medium, etc. Burst test pressure: 60Kgf/cm2 (DN50~DN200), 40Kgf/cm2 (DN250~DN600)

German standard flexible rubber joint Single Rubber Joint 1. Flanged single sphere expansion rubber joint can greatly reduce pipeline system vibration and noise, can solve the problem of joint displacement, axial expansion, etc. 2. According to different materials manufacture, flexible rubber joint can be made into many kinds: acid resistance, alkali resistance, corrosive resistance, oil resistance, heat resistance, adapt to many mediums and different environment. 3. Material is polar rubber, good sealing, light weight, easy installation, long service life, avoid contacting with sharp metal device. 4. If use overhead, can match with elastic support, when installation, bolt with diagonal method to tighten up. 5. If pipeline pressure is high, use bolt connect the flange both ends. 6. Flange connection standard is GB4216.3-4216.5. Features  Minimal axial dimensions   Limited weight   Low warping forces   High-resistance to work   High-capacity acoustic damping Working Pressure(Bar) 10 16 25 Bust pressure(Bar) 30 48 55 Vacuum(mm Hg) 400 650 750 MATERIAL OF EACH PARTS No. Part Meterial 1 Body NR, CR, IIR, NBR, FKM, EPDM 2 Inner & Outer Rubber NR, CR, IIR, NBR, FKM, EPDM, PTFE 3 Body Carcass Nylon cord fabric 4 Reinforcing Ring Multi-strand coppering steel wire 5 Flange Cast and forged carbon steelStainless steelPlastic (CPVC, PVDF, PPH, UPVC, RPP)

British standard flexible rubber joint Rubber Joint 1. Single Rubber Joint can greatly reduce pipeline system vibration and noise, can solve the problem of joint displacement, axial expansion, etc. 2. According to different materials manufacture, flexible rubber joint can be made into many kinds: acid resistance, alkali resistance, corrosive resistance, oil resistance, heat resistance, adapt to many mediums and different environment. 3. Material is polar rubber, good sealing, light weight, easy installation, long service life, avoid contacting with sharp metal device. 4. If use overhead, can match with elastic support, when installation, bolt with diagonal method to tighten up. 5. If pipeline pressure is high, use bolt connect the flange both ends. 6. Flange connection standard is GB4216.3-4216.5. Features   Minimal axial dimensions   Limited weight   Low warping forces   High-resistance to work   High-capacity acoustic damping   Working Pressure(Bar) 10 16 25 Bust pressure(Bar) 30 48 55 Vacuum(mm Hg) 400 650 750

American standard flexible rubber joint Single Rubber Joint Rubber Joint 1. Flanged single sphere expansion rubber joint can greatly reduce pipeline system vibration and noise, can solve the problem of joint displacement, axial expansion, etc. 2. According to different materials manufacture, flexible rubber joint can be made into many kinds: acid resistance, alkali resistance, corrosive resistance, oil resistance, heat resistance, adapt to many mediums and different environment. 3. Material is polar rubber, good sealing, light weight, easy installation, long service life, avoid contacting with sharp metal device. 4. If use overhead, can match with elastic support, when installation, bolt with diagonal method to tighten up. 5. If pipeline pressure is high, use bolt connect the flange both ends. 6. Flange connection standard is GB4216.3-4216.5. Features   Minimal axial dimensions   Limited weight   Low warping forces   High-resistance to work   High-capacity acoustic damping Working Pressure(Bar) 10 16 25 Bust pressure(Bar) 30 48 55 Vacuum(mm Hg) 400 650 750 MATERIAL OF EACH PARTS No. Part Meterial 1 Body NR, CR, IIR, NBR, FKM, EPDM 2 Inner & Outer Rubber NR, CR, IIR, NBR, FKM, EPDM, PTFE 3 Body Carcass Nylon cord fabric 4 Reinforcing Ring Multi-strand coppering steel wire 5 Flange Cast and forged carbon steelStainless steelPlastic (CPVC, PVDF, PPH, UPVC, RPP)

PTFE flexible rubber expansion joint Single Rubber Joint Pipe Expansion Joint 1. Acid resistance Flexible Rubber Joint can greatly reduce pipeline system vibration and noise, can solve the problem of joint displacement, axial expansion, etc. 2. According to different materials manufacture, flexible rubber joint can be made into many kinds: acid resistance, alkali resistance, corrosive resistance, oil resistance, heat resistance, adapt to many mediums and different environment. 3. Material is polar rubber, good sealing, light weight, easy installation, long service life, avoid contacting with sharp metal device. 4. If use overhead, can match with elastic support, when installation, bolt with diagonal method to tighten up. 5. If pipeline pressure is high, use bolt connect the flange both ends. 6. Flange connection standard is GB4216.3-4216.5. No. Part Meterial 1 Body NR, CR, IIR, NBR, FKM, EPDM 2 Inner & Outer Rubber NR, CR, IIR, NBR, FKM, EPDM, PTFE 3 Body Carcass Nylon cord fabric 4 Reinforcing Ring Multi-strand coppering steel wire 5 Flange Cast and forged carbon steelStainless steelPlastic (CPVC, PVDF, PPH, UPVC, RPP) MAIN DATA Nominal Diameter(DN) Length L Axial displacement Horizontal Isplacement Angular deflection mm inch mm Extension Compression mm (a1+a2) 32 1¼ 95 6 9 9 15º 40 1½ 95 6 10 9 15º 50 2 105 7 10 10 15º 65 2½ 115 7 15 11 15º

China zhengzhou mason is china's largest manufacturer of rubber expansion joints of the best, our products are sold around the world. Our main products include rubber joints expansion joints, dismantling joints, steel expansion joints. Rubber joints are made of nbr rubber, ptfe rubber, epdm. The flange of rubber expansion joints can be made jis flange, din flange, ansi flange and bs4504 flange. Variety of materials rubber were applied to different media. Different materials of flanges are applicable to different working environment. Please choose according to their specific working environment. Wooden box

KXFT Limited Flexible Rubber Joint of raw material used in Malaysia and Indoneisia's high quality rubber, natual rubber content reached 47%. The flange of KXFT limited flexible single sphere rubber joint are all made of high quality steel, large CNC machning, galvanized surface and standard flange typing Standard flange of KXFT limited flexible single sphere rubber joint, can produce DIN, ANSI, BS, JIS, GOST, AS ect. The KXFT limited flexible single sphere rubber joint complete specifitions, can be customized DN32-DN3000.