"New type wood chips rotary dryer is shaped as a horizontally inclined rotating cylinder. Wet wood chips is feed at feed port and discharged at the output port . In direct -type rotary dryer (cylinder drier), hot air move through the cylinder in direct contact with the material in the dryer, either downstream or against the direction of its flow. The wood chips rotary dryer is equipped with scatters equipment, make wood chips fully touched with the hot air,so that have a very good drying effect.
Wood chips rotary dryer is used for drying materials with a certain humidity lightweight material, such as bean dregs, wood chips,cassava dregs,Marc,distiller's grains,and others. Our special design wood chips rotary dryer has a strong adaptability of materials and it can dry various materials. This type wood chips rotary dryer operation is very simple and liable. Also our professional wood chips rotary dryer has playing important role in various drying industries,wood chips rotary dryer is used for drying materials with humidity or granularity in the industries of mineral dressing, building material, metallurgy and chemical.wood chips rotary dryer can be used for drying many kinds of materials and with convenient and reliable operation; therefore, it has been widely used.
Working principle of wood chips rotary dryer:
wood chips rotary dryer is consist of heating device,feeding device,transport device,discharge device,dust extraction device and other connecting parts . For the installation process , the rotary drum dryer should slopes slightly so that the discharge end is lower than the material feed end in order to convey the material through the rotary drum dryer under gravity . Material to be dried enters the rotary drum dryer ,and as the rotary drum dryer rotates, the material is lifted up by a series of internal fins lining the inner wall of the rotary drum dryer . When the material gets high enough to roll back off the fins, it falls back down to the bottom of the rotary drum dryer , passing through the hot gas stream as it falls.
"
Over 45mm : 10.0% Max 45mm 19mm : 50.0% Min 19mm-5mm : 35.0% Max 5mm-3mm : 3.0% Max Under 3mm: 2.0% Max Bark Shall and rot shall not exceed 1.5% Chips Shall be free from char and other foreign materials such as sand, stones, plastic, and coal etc. The moisture content of the wood chips approximately 35 % - 38%
Over 45mm : 10.0% Max 45mm 19mm : 50.0% Min 19mm-5mm : 35.0% Max 5mm-3mm : 3.0% Max Under 3mm: 2.0% Max Bark Shall and rot shall not exceed 1.5% Chips Shall be free from char and other foreign materials such as sand, stones, plastic, and coal etc. The moisture content of the wood chips approximately 35% - 38%
Commodity: Wood Chip / Dust Origin: Malaysia Colour: Brown Packing: Jumbo Bag Monthly Supply: 500 - 1,000mt Loading Port: Malaysia Port Price: USD250.00/mt FOB Port
Buy premium shavings and sawdust Softwood and hardwood chips available Material: 100% wood Supplied in packs of 20kg, 25kg, 30kg and as requested Color: natural color Size: as requested
We are production of Wood Chips from raw material from waste wood log, stems & wood branch, wood veneer and another wood waste that we doing processing by machine crusher to make Chips size with specification : Moisture: 45% max, Length: More than 40mm: 5% max, From 9 - 40mm: 82% min, From 4.8 - 9.5mm: 5% min, Less than 4.8mm: 5% max, Wood bark: 3%+/-, Foreign matters: 1% max, Average Size : 2-4cm with a thickness of about 2-8mm.
Made from mix wood Cal 3000 up Ash
- Moisture: 35 - 40% - Length: 9 - 45 mm - Thickness: 5 - 8 mm - Dia: 8 - 20 mm - Packaging: bulk in container, bulk in vessel
We are suppliers of high-quality, debarked pine wood chips intended for cellulose applications. Our monthly supply capacity reaches up to 198,000 tons (3 shipments of 66,000 tons each) on CIF terms for clients in Europe and Asia. Contract Conditions Quantity: 198,000 tons per month (BDTM) under a 12-month contract, with an option to extend up to 10 years. Price: $190 USD per ton (BDTM), totaling a monthly value of $37,620,000 USD. SBLC Value: $451,440,000 USD. Payment Method: 100% transferable, divisible, irrevocable, and confirmed SBLC issued by first-tier banks in the U.S., Canada, Europe, or China (exclusively HSBC or Ita�º Hong Kong). First Shipment Delivery Time: Up to 90 days following document confirmation. We offer reliability and long-term supply capacity, with contract options available for up to 10 years. For further details and inquiries, please reach out.
IGT Chip wood products are versatile materials derived from small wood pieces, primarily produced as byproducts of the lumber industry. These products, made from sawmill residues like wood chips and shavings, are ideal for a wide range of applications, including pulp and paper industries, landscaping, erosion control, and as a base for garden beds. In addition to their aesthetic and functional uses, chip wood products are essential in the manufacturing of composite materials such as particleboard and oriented strand board (OSB). They also serve as a sustainable biomass fuel source, providing an eco-friendly alternative to traditional fuels. With their sustainability and efficient use of forest resources, chip wood products are an excellent choice for environmentally conscious consumers and businesses looking to enhance their operations.
