Oscillating Sintering Testing System

Supplier: Glass facade systems including insulated glass systems, tempered glass, laminated glass, sentry glass, heat soak tested glass, aluminium systems of building, facade, industrial applications with new mold and extrusions.
Services: Shipping and transsportation
Buyer: Pvb layers, float glass, aluminium billets, aluminium rolls, galvanized rolls, machinery production lines of relevant products.

Supplier: Welding oscillator, welding seam tracker, oscillator & tracker combination, ARC height controller, digital electro-gas welding controller, and automatic information control system

It is mainly used for testing dynamic and static mechanical properties of various materials, parts, elastomers, rubber elastomers and shock absorbers.Its could proceeding tensile,compression,curve,low-cycle&high-cycle fatigue,crack growth,,fracture mechanics under sine wave,triangular wave,square wave,trapezoidal wave,oblique wave,customized waveform etc. The operation is flexible and convenient, and the lifting, locking and clamping of the moving beam are all completed by the button operation. The advanced hydraulic servo drive loading, the high-precision dynamic load sensor and high-resolution magnetostrictive displacement sensor are used to measure the force and displacement. Full digital measurement and control system to achieve force, displacement, deformation closed-loop control, Own powerful data processing function under WINDOW10 software, powerful data processing and saving, displaying & printing . All testing process is controlled by computer. Standards as follow, < JB/T9397 Specification of Tension-compression Fatigue Testing Machine> < GB228 Metallic Materials-Tensile Testing at Ambient Temperature> Model DPL-9005 DPL-9010 DPL-9030 DPL-9060 DPL-9100 Max load Dynamicï¼?kNï¼? ±50 ±100 ±300 ±600 ±1000 Staticï¼?kNï¼? ±50 ±100 ±300 ±600 ±1000 Accuracy of measurement Load Static is superior to ±0.5%, Dynamic is superior to ±1.0% Deformation Static is superior to ±0.5%, Dynamic is superior to ±1.0% Displacement superior to ±1.0% Dynamic-testing Frequency (Hz) 0.01ï½?100 Waveform Sine wave,triangular wave,square wave,oblique wave,trapezoidal wave,self-defining fuctio100n Amplitude According to the displacement of hydraulic servo pump to determine the frequency and amplitude. Mechanical parameter Structural style Two columns Four columns piston strokeï¼?mmï¼? ±75(±50) Column spacing 600 750Ã?600 Tensile spacingï¼?mmï¼? 750 900 Control mode Load,deformation and displacement are closed loop control with smoothly converting. Software testing All processing controlled by computer under windows10.

KRD40 series drop tester, mainly simulates the resistance to drop and impact of large and heavy packaging products. Its strong power system and unique sample holder facilitate easy loading and unloading of oversized and overweight items and automatically rise to the setting. After the height, the drop test is completed. It can realize the drop test of the edge, surface and angle of the sample. This equipment is mainly used to evaluate the ability of product or packaging to withstand drops during transportation and loading and unloading, so as to improve product and packaging design. 1. Driven by pneumatic and servo motors, stable lifting process with upper and lower displacement restrictions, safe and reliable; 2. Adopt single-track or dual-track lifting method, and the height can be adjusted arbitrarily; 3. It can clamp and drop the test specimen in different directions such as edges, faces and angles; 4. The testing machine adopts PLC full-automatic control, large size true color touch LCD screen, 5. No special foundation required, no other complicated operation or installation; 6. Remote control can be realized to ensure the safety of operators (customized functions). Technical Specifications Parameters KRD40-100 KRD40-200 KRD40-300 Max. Load (kg) 100 200 300 Drop Height (mm) 0ï½?1500 Max. Specimen Size (mm) 1000�?1000�?1000 1200�?1200�?1200 1300�?1300�?1300 Position Accuracy �±2% or �±10mm (subject to the larger value) Drop Zone Sizeï¼?W*D/mmï¼? 1200�?1200 1400�?1400 1500�?1500 Test Mode Face, Edge and Angle Power 1-phase AC 220V�±10% 50Hz 3-phase AC 380V �±10% 50Hz Working Environment Temperature range 0ï½?40â??, Humidityâ?¤80% (non-condensing) Installation Condition Foundation-free, the cement floor shall be leveled and the working distance of 800~1000mm shall be reserved around the equipment Standards ISO2248-1985(E) IEC68-2-27 ISTA

Supplier: Torque tool, bolting tools, hydraulic torque wrenches, power packs, bolt tensioners, torque multipliers, hydro test pumps, hydraulic bearing puller, hydraulic hand pumps, impact sockets

Functions as follow: 1. The testing machine is equipped with 100KN axial actuator, which can complete the uniaxial tensile, compression and fatigue testing of materials. 2. The machine is configurate with high temperature heating box, which can complete the fatigue testing uner 1100 . 3. Adopt of imported load cell, displacement and deform extensometer, which would control the data of testing force, confining pressure, specimens deformation automatically and precisely. Such as: a) constant stress, constant displacement, constant deformation. b) speed of constant stress, constant displacement, constant deformation. c) rate control of stress, displacement, deformation. d) loading and unloading in circulation. 4. The testing machine adopts high performance electro-hydraulic servo proportional valve set with wide speed and digital controlling with full digital closed-loop speed regulation control system, smoothly (no impact) conversion among force (stress), displacement and deformation (strain). 5. Safety protections: a) electric system: over voltage, over current, over heating. b) measuring and c pressure, oil temp, oil-way blocking. d) high temp system: ultralimit of high temp e) deformation and time pre-setting, limit of deform. f) protection of specimens rupture 6.The software of testing is working under windows with strong data processing, automatically save, display and printing. Standards as follow, GB/T2611-2007 General Technical Requirements for Testing Machine JJG 139-1999 Tension,Pressure and Universal Testing Machine GB/T2282010 Metal Tensile Test GB/T3075-82 Standard Test Method for Axial Fatigue of Metals GB/T2039-80 Test Method for Tensile Creep of Metals GB/T16826-2008 Electro-hydraulic Servo Universal Testing Machine JB/T9397-2002 Technical Condition of Tensile and Compression Fatigue Machine GB/T228.1-2010 and GB4338-2006-T Testing Methods of Metals Technical spec: 1.Actuator: imported HANCHEN dynamic servo actuator in Germany. Max static loading forceï¼?100KN Max dynamic loading forceï¼?100KN loading frequencyï¼?0.1Hzï½?100Hz orï¼?0.1-30HZï¼? Speed of flexï¼?0ï½?200mm/s Dynamic performanceï¼?loadï¼?±100kNï¼?Ã?amplitudeï¼?±0.1mmï¼?Ã?frequency(100Hz) Accuracy of loadï¼?±0.1%FS Accuracy of displacementï¼?±0.5%FS 2.TEMP of heating furnaceï¼?1100ï¼?accuracy : ±5 3. Testing specimens Specimens plateï¼?0ï½?10mm Round rod specimensï¼?dia. :0ï½?Ï?30mm High tempï¼?connect to M20 of high temp with threaded 4.Oil source systemï¼? Powerï¼? AC380V 50HZ about 35KW Flowï¼?57L/Min Pressureï¼?rated pressure: 25MPa 5.Sensorï¼? Load cellï¼?INTERFACE1032,range is 125KN,accuracy is ±0.04%FS

Bounce testing simulates the constant loose cargo state during truck transport. Often times, containers carrying military and civilian hardware (such as: medical supplies, electronics, weaponry, communication devices) travel for extended periods of time and must be transported off-road. All of these items must maintain functionality upon arrival at their destinations. The International Safe Transit Association (ISTA) developed a civilian package test procedure resembling the military test: 1A for products weighing less than 150 lb (68 kg) and 1B for over 150 lb (68 kg). Additional tests in subsequent procedures such as 1C, 1D, 2A and further combine the loose cargo basic test with atmospheric conditioning and other factors. MIL-STD-810 and ISTA Procedures 1A and 1B offer package test procedures for packages subjected to repeated vibration (bouncing Testing) for a distance of up to 150 miles (240 km), while unrestrained and repeatedly colliding with other cargo and the walls and floor of a four-sided compartment. Technical Specifications Model KRD51 100 KRD51 200 KRD51 500 KRD51 1000 KRD51 2000 Max. Load (kg) 100 200 500 1000 2000 Displacement (mm) 25.4 Frequency 2~5Hz (120~300RPM) Test Motions Circular Motion Working Table Size (mm) 1700�?1200 1900�?1300 2000�?1500 2700�?1650 2700�?1800 Height of Specimen COG (mm) ï¼?500 ï¼?600 ï¼?700 Consumption Power (kVA) 8 10 12 15 20 Dimension (mm) 2100 1500 1200 2170 1570 1400 2300 1800 1800 2700 1800 1800 3120 2100 1850 Weight (kg) 1600 2800 3500 5000 8500 Power Supply 3-phase AC380V -810G FED-101

KRD13 series high acceleration shock test system is specially designed to meet the requirements of military industry and home appliances. The system adopts the principle of pneumatic energy storage expansion. By adjusting the inflation pressure, various high-level acceleration tests can be easily implemented in a short stroke. For the classic drop test, it is equipped with the corresponding shock amplifier to complete drop test. 1. Windows-based stable control system, full-automatic remote-control interface 2. Pneumatic cylinder driving with advantages of large driving force, short accelerating stroke, low cost and pollution free. 3. Automatic control of lifting height with high accuracy and good repeatability 4. Adopts the high strength and hardness cast aluminum table, which has high first-order resonance frequency, featured with low noise and no clutter 5. The most reliable double-brake system: effectively avoids secondary rebound collisions, more securely positioning the table, and more reliably guarantees the safety of the operator. 6. Easy installation: the device comes with a base, due to short driving stroke of the pneumatic cylinder, the footprint is small. Technical Specifications Model KRD13ï¼?50 KRD13ï¼?100 KRD13ï¼?200 KRD13ï¼?500 KRD13ï¼?800 KRD13ï¼?1000 KRD13-2000 Rated Load (kg) 50 100 200 500 800 1000 2000 Table Size (mm) 500 500 600 600 800 800 1000 1000 1200 1200 1500 1500 2000 2000 Peak Acc. (g) Half-Sine 10~1500 10~1000 10-1000 10-500 10-400 10-300 10-200 Post-Peak Sawtooth 10~200 10~100 10-50 Trapezoid 15-200 15-100 15-100 15-60 15-50 30-50 Pulse Duration (ms) Half-Sine 2 60 3 60 3 60 4 60 5 60 6 60 8 60 Post-Peak Sawtooth 3 18 6 18 Trapezoid 3 18 6 18 Bump Waveform (Optional) Half Sine Waveform Bump Peak Acceleration (g) 5 100 5 80 5 60 5 40 / Bump Pulse Duration(ms) 3 30 3 30 4 30 5 30 / Bump Rate (Times/Min) 10~80 10~60 10-40 / Overall Dimension (mm) 1200 1200 1500 1200 1200 1650 1100 1100 1700 1300 1300 1600 1500 1500 1700 1600 1600 1800 2000 2000 1900 Weight (kg) 3000 3800 3200 4000 5000 6000 8000 Environment Temperature range 0 40 , Humidity 80% (non-condensing) Power 1-phase AC220V±10% 50Hz Air source 1MPa Installation Condition Foundation-free, the cement floor shall be leveled and the working distance of 800 ~ 1000mm shall be reserved around the equipment Standards IEC68-2-27 MIL-STD-202 MIL-STD-750 MIL-STD-810 MIL-STD-883 UN38.3 IEC62281 IEC62133-2 UL2054 IEEE1625 SAEJ2929 IEC62660-2 ISO12405-3 UL2580

Product Introduction YDW series PD tester system is mainly used for testing frequency voltage insulation level of various insulation materials insulation structure and electrical products also as partial discharge frequency testing power supply for testing object such as transformer mutual inductor and lightning arresters. It widely used in electrical manufacturing power operation departments research institutes and universities. product features Product Characteristics A variety of control methods and insulation methods can be used to configure freely according to user demand. â??Build-in multiple frequency power generator is used for testing partial discharge value of high voltage transformer.The system has a built-in multi- frequency power generator which can be used to measure the discharge of high voltage transformer. Manual control operation is intuitive easy to use maintenance low price. It has gas insulation transformer oil insulation dry epoxy resin insulation and other forms test transformer can choose and match according to user's demand. According to the user's requirements different sets of measuring instruments can be configured to meet the requirements of different precision and analysis faults. Automatic control system can be used in different configurations of the bureau and the results can be automatically detected and analyzed.