Melt Pressure Transmitter

Supplier: Melt presssure transducer, melt pressure transmitter, melt pressure gauge

Quick Details Place of Origin: Sichuan, China (Mainland) Brand Name: SAND Model Number: PT124B Pressure Range: 0~5~150MPa / 0~500~20000psi Accuracy: ±1.0%FS Power: 24VDC(9~36VDC) Output: 0~5V or 1~5V or 0~10V or 0~20mA or 4~20mA Probe Temperature: 400 Temperature Drift:

Features: 3 1/2 led/lcd display Compact outline, easy installation Strong compatibility Adjustable pressure unit Applications: The oil industry, chemical industry, electric power. Hydraulic pressure system, pneumatic system Energy and water treatment system. Automation equipment Industrial process control Performance parameters Reference temperature: Measuring range -0.1~250mpa Pressure type:Gage pressure, absolute pressure Output signal :4~20ma , 0~10v or others Display type3 1/2 led or lcd display Accuracy(%fs)0.10.250.5 Damping ( second )Adjustable Operating voltage(v)12~36v dc(standard 24v) Operating temperature: -20~85c Overload capacity(%)300 Life spanMore than 9 million times pressure cycle MediaMedia compatible with 316l Diaphragm material316l or ceramic diaphragm Housing material1cr18ni9ti Pressure interfaceM20*1.5, g1/2, g1/4, 1/4npt or others Enclosure ratingIp65 Weight 280g Carton size:l13cm*w6cm*h5.5cm Weight:0.5kg

Supplier: Melt pressure transducer, melt pressure transmitter, melt pressure gauge

Supplier: Pressure transmitter, digital pressure gauges, differential pressure transmitter, pressure transducer, level pressure transmitter, industrial pressure transmitter, air compressor pressure transmitter, melt pressure transmitter, smart differential pressure transmitter, pressure switch
Services: Design, OEM
Buyer: Air compressor, hydraulic and pneumatic system, water treatment, automation equipment, industrial process contro, marine engineering

Supplier: Melt pressure transducer and transmitter, pressure sensor/transmitter, melt pressure gauge, pressure indicator, intelligent pressure instrument, melt temperature sensor, temperature sensor
Services: Transportation

Supplier: Load cells, pressure sensors, pressure transmitters, pressure transducers, melt pressure transmitter, level transmitter, pressure switches, pressure sensor chips, strain gauges

Pressure Transmitter for Sandvik LH307/LH410

Notice 1. All the supplied products are provided with product certificates and instructions, including product number, technical parameters, wiring diagram,factory date, etc. Please check carefully to avoid misuse. 2. Installation should check whether the field interface is connected to the product according to the connection mode and thread type of the product.The mouth is the same. If it is a threaded interface, it should be tightened slowly and sealed carefully. Torque can not be added directly to the transmitter shell, but only on the six sides of the pressure interface. 3. The wiring should be strictly in accordance with the instructions of our company. 4.This product is a precise instrument. It is forbidden to disassemble, colide,fall,throw hard or punch the drainage hole with a sharp instrument. 5. The transmitter can work by electricity, but the preheating output is stable for 30 seconds. 6. If any abnormality is found in use, the power supply should be turned off, the use should be stopped, the inspection should be carried out, or contact our technical department direct. 7.When transporting and storing, the original packaging should be restored and stored in a cool, dry and ventilated warehouse. 8.The quality assurance period is 12 months. Intelligent Operation Method 1. LCD shows the output percentage or process pressure. Press the S key to select the display percentage or pressure.Press Z key to select pressure unit KPa or Mpa when displaying pressure. 2. Press S+Z key for 8 seconds, then release it at the same time, press Z key to set the zero value; Press the S key set the range. note: this function can only be triggered once an operation. 3. Adjustments to zeros or ranges may cause changes in the displayed options, i.e.The percentage being displayed becomes pressure or KPa becomes Mpa, etc. All these changes are shown only in the display, and have no effect on the internal parameters of the transmitter, pressure detection and current output. After adjusting the zero point and range, the S and Z keys can be used to select the desired percentage or pressure. 4. Zero-setting in field pressure-free state: 30 seconds after pressing S+Z key, the display shows zero time at the same time release the two keys, that is, zero. Simulated operation method 1.Zero-setting in pressure-free condition: The potentiometer with the word "zero" on the circuit board is adjusted to zero when it is displayed on the spot.(Note: Clockwise increase, counterclockwise decrease) 2.The potentiometer marked "range" on the circuit board can not be adjusted without standard pressure, so as to avoid the disorder of measurement range.