Zircon sand is a tetragonal system with a square pyramidal shape with a specific gravity of 4.6~4.71, a uniform Mohs hardness of 7-8, a refractive index of 1.93-2.01, and a melting point fluctuating within 2190~2420 °C depending on the impurities contained. It is a tetragonal system, often in the form of a well-developed cone-shaped small square cylinder, which is also irregularly granular. Sexually brittle, fractured shell-like. It is a high quality refractory material. It is symbiotic with ilmenite, rutile, monazite and xenotime in coastal sand, and is obtained after sorting by water separation, electric selection and magnetic separation.
Commodity 1 provides Zircon ore directly from the mine site to the global market. There are no middlemen involved, only our staff on the ground. We strive to organize smooth and transparent transactions. We believe in building long-term relationships with our customers. We aim to be our customer's Zircon ore supplier. We offer the best prices for our buyers. PACKAGING & DELIVERY Packaging Details: Sand Port: Lagos Apapa Port, Nigeria Bags: 50 kg Container: 20 ft Lead time: Quantity (metric tons) 25MT/Month 250MT/Month (Lead days) 30 Days 30 Days COMPOSITION ANALYSIS OF THE ZIRCON ORE Element Average content Zirconium oxide (ZrO2) 65-70% Silicon dioxide (SiO2) 20-25% Hafnium oxide (HfO2) 0.2-4% Titanium dioxide (TiO2) 0.1-1% Iron oxide (Fe2O3) 0.1-0.5% Other elements 0-1% The composition of zircon sand can vary depending on the place of deposit. For example, zircon sand from Australia generally has a higher percentage of zirconium oxide than zircon sand from India. The composition of the zircon sand is crucial because it determines the characteristics of the zircon that can be formed from the metal. For example, zirconium copper with a high percentage of zirconium oxide will produce zircon with a high melting point and high corrosion resistance. The composition of the zircon sand is also essential in determining the extraction method of zircon from the ore for example, hafnium oxide-rich zircon copper is mined using hydrofluoric acid leaching. In general, the composition of zircon sand is an essential factor that affects the characteristics of zircon that can be produced from the ore and the methods that can be used to extract zircon from the ore. Zircon ore composition varies slightly based on the source and what region of Nigeria it is collected. We encourage buyers to ask for a free sample for their composition analysis and evaluation of ready-to-ship material. Samples are free, but buyers should arrange to pick up a free piece with a courier service.
Please feel free to inquiry to us once you have interest.
Zircon sand is generally found in land of ancient coastlines,some of which can be found very far inland,where the heavier mineral sands formed hardened deposits.These deposits are typically mined via dry or wet(dredge)mining techniques. Typical chemical analysis: ZrO2+HfO2:65.5-66.5% Fe2O3:0.04-0.07% TIO2:0.15-0.19% Al2O3:0.40-0.90% P2O5:0.06-0.09% SiO2(Total):32.2-33.2% Free SiO2:0.25-0.45% Physical Properties Refractive Index:1.93-2.01 Specific Gravity:4.6-4.71g/cm3 Mohs Hardness:7.5+ Melting Point:2340-2550 Packing:30/40kgs pvc bags+1mt big bag Main Applications Foundry Ceramic Chemical Glass Refractory abrasive washing Cleaning Blasting and nuclear industry etc Available Sizes:60-100mesh 80-120mesh 100-200mesh 200-325mesh 200mesh 325mesh 2000mesh
Zircon sand finds applications to be used in ceramics, refractory, foundry, electronics, zirconium compound, and other fields, it is also used in the preparation of nuclear reactor structural materials and control rod with zirconium and hafnium as irreplaceable raw minerals making it a strategic mineral. It is used in ceramics as a major end-user, zircon sand is used as a glaze emulsion is ceramics such as glazed floor tiles, wall tiles, sanitary ware, and tableware. Properties of Zircon Sand Zircon is crystal and shows the structure of the quarter column. It usually occurs with ilmenite rutile, sillimanite, etc. in beach sand and is refined by water, electricity, and magnetic beneficiation process. Pure zircon is a colorless and translucent crystal. It appears yellow, orange, red, and brown with different origins. Its hardness is 7.8, specific gravity 4.6-4.71, refractive index 1.93-2.01, and the melting point of 2550 C.
Supplier: Refractory bricks, high alumina bricks, acid proof bricks, tiles and castables, all mortars and fire clay, low cement castables, insulating castables, conventional dense refractory bricks, insulation bricks, cold face, hot face insulation bricks, hot face insulation bricks, acid resistant bricks/components, membranes, acid resistant cement, construction chemicals, class 1 ar tiles and bricks 38mm and 75mm, 4457 vitrified ar tiles with 0% water absorption, 20mm & 25m, primer, mastics, pot. silicate cement, coerce cement, furnace based cement, crushed refractory boiler bed material, acid resistant tiles, acid resistant brick fireclay type, acid resistant brick red shale type, bitumen primer, epoxy resin & hardner, furan powder and syrup solution,
INTRODUCTION: Zircon sand, also known as zircon, is a mineral composed mainly of zirconium silicate (ZrSiO4). Pure zircon sand is a colorless transparent crystal. FORM OF ZIRCON ZIRCON SAND ZIRCON POWDER APPLICATION: To be used in Ceramics. Opacity, whiteness, wear resistance and moisture resistance make it a key component of ceramic tiles, sanitary ware and tableware. To be used in refractory industry to protect the interior of high-temperature furnaces To be used in foundries and precision casting processes for the casting of metals and alloys into various products due to the thermal stability, high melting point and abrasion resistance provided by zircon. Another important application is the production of a broad range of zirconia chemicals, which in turn, have a diverse range of end uses including ceramics, refractory, catalysts, coating electronics and biomedical related products. Some zircon is used as an x-ray filter and as a polishing agent in the production of silicon wafers for the manufacture of semiconductor components such as integrated circuits (computer chips).
We are glad to propose 500 MT of stain less steel mill scale. Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products. At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel. The recovery ratio after melting in furnace for the most valuable alloy elements is: - Ni: 3.5 - 4.5% - Cr: 6-8% From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows: Waste code: 10 02 10 The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers. Chemical analysis of the material is available on request.
Mill scale, is formed on the outer surfaces of plates, sheets or profiles when they are being produced by rolling hot iron or steel billets in rolling or steel mills. It looks like a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in color. Being produced during the reheating, conditioning and hot rolling operation for the production of steel articles, the mill scale initially adheres to the steel surface and protects it from atmospheric corrosion, provided no break occurs in this coating. From the chemical and physical analysis performed on the scrap, and according to the european environmental rules, the material has been classified as a special non dangerous waste, listed in green list In particular the mill scale can be classified as follows: Einecs (european commission no.): 266-007-8 Waste code: 10 02 10 Basel code: b 12 30 Hs code: 2619.00
Zircon sand is a mineral composed mainly of Zirconium silicate (Zrsi04). We claim to be our customers Zircon sand suppliers, we offer the best price for our buyers and there are no middlemen involved as our buyers deals directly with our staffs. PACKAGING AND DELIVERY- PACKAGING-: Sand port -: Lagos Apapa Port , Bags-: 50kg Nigeria bags, CONTAINER-: 20ft, Quantity {metric tons } 25MT- 30MT/Month.
