Specification:
Model NO.: SJ-OFOC-04
Dimension (HWD) MM: 860X610X335
Material: Cold-rolled Steel or Stainless Steel.
Installation: Wall Mounted.
Comments: 1. Overall dimension could be custom made by requirement. 2. Configuration of Box can be customized according to customer requirement.
We are offering a telecom towers & accessories that are designed and manufactured by our experienced engineers. In order to protect the highly sensitive telecom equipments, we design enclosures and shelters. These are perfect to place for bts equipments, amplifiers, power interface units, smps power supplies/chargers, batteries, mw racks and tools. We design these telecom towers & accessories keeping in mind the heat generation by the enclosed equipment and environment temperature variations. To minimize the use of air conditioners and generator, we advanced passive phase changing material. This also ensures low running cost and fault free long life of the equipment. We are offering intelligent power interface units that are designed for a/c voltage fluctuations in remote and rural areas. To provide exact cooling, we also provide cooling sections such as pelletier coolers, vortex coolers, passive cooling systems, dc powered air-conditioning systems and exacts fans. As energy saving in a vital concern for telecom operators around the world, our passive cooling technology in its shelters designed using phase change material (pcm) is known for saving energy. Panel construction: The prefer panels with polyurethane foam (puf) insulation are available in thicknesses of 20 to 150mm Multiple choices for panel interlocking are available Designed to ensure a completely moisture free environment Additional reinforcement are provided on request Shelter roof: Side sloping roof with reducing thickness Water tight sealing Extra wide flashing on roof fridge to avoid any air and water ingress Additional roof /secondary roof on demand
La-12 is a bi-amps, line array system which is made of one 12", one 3"titanium neodymium compression drivers and high-performance low-distortion compression driver with innovative horn design of waves phase philosophy. It is a zero interfere line array with multi- speaker combined to produce accurate directivity and maximum dynamic impact. Each enclosure is equipped with rigging system, allowing flown array to be constructed rapidly and safely. T-12 is a compact line array enclosure designed to bring superb line array performance to large stadiums, big outdoor concerts and commercial events. The switchable one or bi-amplified two way cabinet is very efficient, it meets the need for a high power, high bass impact system that is versatile and scalable for a very wide range of applications in the live sound, corporate and fixed installations. Model La-12 Type Array system Frequency response 55hz-20khz±3db Power handling 400w(rms)800w(peak) Sensitivity 100db(1w@1m) Max@s.P.L 126db(peak/1m) Lf section 12"(310mm) woofer 75mm(3in)coil Nominal impedance 8 ohm Hf section 1×3"compression driver 44mm titanium diaphragm Nominal impedance 8 ohm Output section 2-channel Dispersion pattern 110°h×5°v Finish Black paint Speaker cables Passive 1(+), 1(-). Built in Crossover Bi-amp lf 1(+), 1(-) Hf 2(+), 2(-) Input connectors 2×nl4mp speakon Dimensions 355×593×434mm(w×h×d) Package dimensions 425×660×505mm/0.14cbm Enclosure Brich plywood Net weight 28kg Gross weight 31kg
Electronics Enclosure We can customize various abs or other plastic enclosure for your electronic projects. We can produce cabinets with mounting flanges, small enclosures for portable equipment, weatherproof outdoor enclosures, etc.
SJ-OCC-SS-576-1 Stainless Steel Fiber Optical Cross Connect Cabinets OCC is designed for the connection between the Optical fiber cable and the main points, and it is a kind of port device. It has the function of direct or indirect connection, coiling, storage, and dispatching on the fiber cable.
Material Steel 1.We make the tooling by ourselves according to customer's drawing or sample 2.We send samples to customer to confirm first 3.Lifetime:forever,we maintain freely Usage: Pole Brackets are used to support ADSS fittings of utility poles Surface treatment: Hot-dip Galvanized
Supplier: Fiber optic splice closure, ftth fiber optical distribution box, ftth fiber optic socket face plate, fiber optic patch panel terminal box, odf optical fiber distribution frame, occ optical fiber cross connection cabinets, network cabinet, equipment enclosure, wdm, plc splitter, patch cord, adaptor, ftth accessories, etc.
Buyer: Fiber optic splice closure, ftth fiber optical distribution box, ftth fiber optic socket face plate, fiber optic patch panel terminal box, odf optical fiber distribution frame, occ optical fiber cross connection cabinets, network cabinet, equipment enclosure, wdm, plc splitter, patch cord, adaptor, ftth accessories, etc.
Supplier: Sheet metal enclosures, metal components, electrical, electronic enclosures, telecommunication enclosures, medical instruments, computer chassis, food service equipments and casino machine, cold rolled steel, hot rolled steel, section metal materials, stainless steel, copper, isolation materials, rubber materials
Supplier: Equipment Control Boards, Cable Assembly, Test Module Assembly, Control System Upgrade Hmi, Display Support, Transport And Handling Solutions And Enclosure Cooling System
Description and Application W-210A is a line array speaker which is made of two 10'' neodymium woofers, two 2'' titanium neodymium compression drivers and high-performance low-distortion compression driver with innovative horn design of waves phase philosophy. It is a zero interfere line array with multi- speaker combined to produce accurate directivity and maximum dynamic impact. Wherever low frequency extension is required, a W-210A will integrate seamlessly with W-250A line array sub-bass system in a standard configuration. Each enclosure is equipped with rigging system, allowing flown array to be constructed rapidly and safely. W-210A is very versatile and scalable for a wide range of applications in touring performance, corporate and fixed installation fields. W-250A is dedicated high performance sub-bass system designed to augment the low frequency output of the W-210A, W-250A is a sub-bass enclosure which must be flown with W-210A. So its physical dimensions are identical to the W-210A and it is equipped with the same proprietary rigging system. It features with twin 15¡± neodymium woofers with magnet structure and suspensions engineered for maximum linear excursion Model W-210A/W-250A Type Line array system Line array sub-bass system(W-250A) Frequency Response 55Hz-20KHz 3dB 40Hz-150Hz 3dB(W-250A) Directivity index(Dl) 12(¡À2)1.2KHz-16KHz Power handing LF 500W(RMS)1000W(PEAK) HF 160W(RMS)320W(PEAK) 1200W(RMS)2400W(PEAK)(W-250A) Sensitivity LF 99dB(1W@1M) HF 108dB(1W@1M) 112dB(1W@1M)(W-250A) MaxS.P.L LF 127dB(PEAK/1M) HF 127dB(PEAK/1M) 143dB(PEAK/1M)(W-250A) LF section 2¡Á10"(260mm) neodymium woofer 75mm(3in)coil Components 2¡Á15"(380mm) neodymium woofers 100mm(4in)coil(W-250A) Nominal impedance 16 ohm 4 ohm(W-250A) HF section 2¡Á2"neodymium compression driver with 51mm titanium diaphragm Nominal impedance 16 ohm Output section 2-channel Dispersion pattern 110¡ãH¡Á9¡ãV Finish Water-proof,wear-resistant textured black paint Array design Arrays of less than 3¡ÁW-210A will provide poor dispersion control and are neither recommended nor supported Speaker cables LF 1(+)1(-) HF 2(+)2(-) 1(+)1(-) (W-250A) Rigging system Please refer to the W-210A user manual before any operation Input connectors 2¡ÁNL4MP speakon Recommend crossover LF 45Hz-1200Hz HF 1200Hz-20KHz 35Hz-120Hz(W-250A). Dimensions 855*293*600mm(W*H*D) 855*610*820mm(W*H*D)(W-250A) Package dimensions 925*360*670mm/0.22cbm 925*680*890mm/0.56cbm(W-250A) Enclosure Birch plywood Net weight 42kg (W-210A)/ 81kg (W-250A) Gross weight 45kg (W-210A)/ 84kg (W-250A).