7" Manual Lcd Separator

Four wires resistive touch-screen interface with high Sensitivity (USB port/RS232 optional) Standard VGA input (15 pin D-SUB/USB) can match with PC, GPS and security systems Two RCA video input can match with VCD, DVD and camera RGB input for navigation display (optional) Touch-screen for PC display (optional) Built-in speaker/amplifier and earphone jack Operating Systems: DOS/Windows 9X ME 2K XP 7 Vista NT CE / LINUX / Mac£¬ect. Can support almost all kinds of resolution. *Monitor Dimensions: 180 x 123 x 30(mm) *Provider Weight (approximately) Monitor/Shipping: 1.5kg.

we customize lcd displays for client from different industry,like meters, thermostat,weighing scales,etc Customers are always satisfied with our high quality,good service and short lead time TN/HTN/STN/FSTN/VA LCD are supported together with backlight

TBK 568R LCD screen preheating separating machine for mobile phone iPad tablet repair. TBK-568R LCD separator thermostatic temperature controller for screen opening replacing repair. TBK568R New LCD screen Dismantling Treasure Heating Silicone Pad Adjustable Heating Platform. Parameters: Model: TBK-568R. Voltage: 110V/60Hz-220V/50Hz (with voltage switcher). Power: 350W. Product size: 350*210*55mm. Packing size: 380*225*75mm. Product net weight: 1.0 kg. Package gross weight: 2.0 kg. Features: 1. LCD separating machine for iPad/tablet screen, for Smartphone screens 2. Easy to use 3. Extremely rapid warming 4. Voltage switcher for 220V/50Hz and 110V/60Hz 5. Components place grid. 6. USB charging output. 7. High temperature resistance heating pad bending. 8. Screwdriver and batch nozzle bracket, hole position for screws.

TBK 2021 built-in double pump vacuum separator, heating and separating the mobile phone LCD screen frame and OCA glue removal Detailed Steps: 1. Turn on the power: Plug the power cord into the power connector on the back of the separator, and turn on the power switch. 2. Preset temperature: Press the SET button to preset the temperature, press the up button to set the temperature to about 85 degrees, and press NET to save. 3. Prepare the wire handle: equipped with a wire handle to separate the screen 4. Place the silicone non-slip mat: put it on the panel of the separator, align the rubber mat with the panel holes. 5. Screen separation preparation: Put the screen to be separated in the center of the panel, press the start key to start vacuum adsorption, and ensure that the screen is held. 6. Start cutting the screen: the screen is preheated for 3-5 minutes to start cutting. 7. After removing the bad screen, turn off the power of the separator. If it is dry glue, you can directly tear it off. If the water glue needs to be removed with the help of a blade and a glue removing solution. Features: 1. Can be used for straight screen or curved screen to remove glue LCD separation maintenance etc. 2. The heating table can rotate 360 degrees, the working temperature is 85â??, the highest temperature is 350â??, and the maximum support is 7 inches. 3. Built-in double vacuum pumps, strong suction, to ensure that the phone is firmly fixed. 4. Thermal insulation non-slip silicone pad, high temperature resistant insulation material ddoes not affect the suction, you can also choose not to use silicone pad 5.The heating platform is protected by a fuse to prevent burnout.

M-Triangel CP-150 14inch Vacuum LCD Screen Separator Machine for LCD screen repair. Built in Vacuum Pump 14 inch Phone LCD Screen Separator Machine for iPad Tablet Touch Screen Separating Machine. Available for 110V and 220V. Features: 1.Manual LCD remove was applied to separate the broken Touch Screen Glass. 2.It is easy operated, using time Accurate Temperature Control. Voltage: 110V or 220V Power: 500W Package size: 450*350*230mm Machine size: 450*350*230mm Operation: 1.Put your LCD with touch screen on the metal plate, LCD side above; 2.Set the 4 arms to keep the touch screen on the metal plate stably; 3.Turn on the machine and wait for the metal plate become 80-100 degree (can not beyond 100 degree); 4.Start to separate the LCD off the glass with a core, then right and left movement with the core in between the LCD and the glass, please notice you must using gentle power and keep the core stay on the LCD surface, so that it will avoid the touch screen be damaged.

LCD screen preheating separating machine for mobile phone tablet repair. LCD separator thermostatic temperature controller for screen opening replacing repair. New LCD screen Dismantling Treasure Heating Silicone Pad Adjustable Heating Platform. Parameters: Voltage: 110V/60Hz-220V/50Hz (with voltage switcher). Power: 350W. Product size: 350 210 55mm. Packing size: 380 225 75mm. Product net weight: 1.0 kg. Package gross weight: 2.0 kg. Features: 1. LCD separating machine for tablet screen, for Smartphone screens 2. Easy to use 3. Extremely rapid warming 4. Voltage switcher for 220V/50Hz and 110V/60Hz 5. Components place grid. 6. USB charging output. 7. High temperature resistance heating pad bending. 8. Screwdriver and batch nozzle bracket, hole position for screws.

Motorized in-dash panel; Built-in av/tv Tv type:pal/ntsc, English osd menu indicate; Remote control; Bright, standard, gentle three kind of preinstall video mode; Left/right can be changed; 3 channels video input(include camera in) Av/tv display and audio output; Back rearview camera input; Lcd monitor turnover process has the breakdown automatic inspection and protection; Built-in amplifier: output power 1w(max).

Soft cover magazine design to insert more product images Hard cover multi page design like a booklet With video book you can create slide shows to wow your clients, invest a great marketing tool that will make your brand stand out! A5 Video book type is the right instrument for your business. Contact us when you need it.

Key touchscreen control; Video system: pal/ntsv; Multiligual osd menu indicate; Remote control; Colo available: beige, gray, black; Expand 16:3, 4:3; Resolution: 336, 960 pixel (480*3*234); Two vedio input; Supply voltage: dc+12v