Electrode Joint

Graphite electrode nipple is the accessory of the graphite electrode. It is used to connect the electrode bodies for the continuous use of electrodes.In order to prevent the graphite electrode from loosening, all graphite electrode joints produced by Chengxin Carbon have undergone special treatment. The conical graphite electrode joint is shown in the figure.

The electrodes are packed in wooden boxes and wooden frame bottoms, and the joint holes are protected by a foam cover and bundled with a packing steel strip. The electrode joints are packed in cartons, foam boxes or packed in large wooden boxes and bundled with baled steel strips. When more than two electrode joints are installed in the same carton, the joints are separated by corrugated paper or foam plastic sheets. When the electrode and the joint are integrally connected, the electrode joint hole and the joint are packaged with a foam cover, and then wrapped in a wooden box and a wooden frame, andBundled with baled steel strips. UHP graphite electrode Manufacturer has advanced production equipment, complete facilities, advanced testing methods and professional team. Always put quality in the first place, from material selection to final machining, each process is strictly and quality-tested and controlled, and carefully create high-quality graphite products for customers.

Supplier: Gouging carbons electrode, jointed carbon electrode, rectangular carbons electrode, graphite electrodes, manual metal arc gouging electrode.

Nipple Graphite Electrode Nipple Graphite Electrode Nipple supplier DESCRIPTION Nipple is used as a joint for the electrode. The conical joint not only has high flexural strength, but also is easy to connect. SPECIFICATION We supply 4 types of nipples: 3TPI/3TPIL/4TPI/4TPIL.   3TPIL Nipple Dimension Table Electrode diameter Joint Joint hole Pitch D L d2 l d1 H 75 46.04 -0.5 76.2 -1.0 20.8 -30 6 39.72 0.5 41.10 0.5 6.35 100 69.85 -0.5 101.6 -1.0 40.3 -30 6 63.53 0.5 53.80 0.5 6.35 130 79.38 -0.5 127.0 -1.0 45.6 -30 6 73.06 0.5 66.50 0.5 6.35 150 99.08 -0.5 139.7 -1.0 56.2 -30 6 85.76 0.5 72.85 0.5 6.35 200 122.24 -0.5 177.8 -1.0 80.0 -30 6 115.92 0.5 91.90 0.5 6.35 250 155.58 -0.5 220.1 -1.0 103.8 -30 10 147.14 0.5 113.05 0.5 8.47 300 177.17 -0.5 270.9 -1.0 116.9 -30 10 168.73 0.5 138.45 0.5 8.47 350 215.90 -0.5 304.8 -1.0 150.0 -30 10 207.47 0.5 155.40 0.5 8.47 400 241.30 -0.5 338.6 -1.0 169.8 -30 10 232.87 0.5 172.30 0.5 8.47 450 273.0 -0.5 355.6 -1.0 198.7 -30 10 264.62 0.5 180.80 0.5 8.47 500 298.45 -0.5 372.5 -1.0 221.3 -30 10 290.02 0.5 189.25 0.5 8.47 600 317.50 -0.5 457.2 -1.0 233.5 -30 10 324.00 0.5 243.50 0.5 6.35 Linzhang County Hengqiang Carbon Co., Ltd is the professional manufacturer for high quality Graphite Electrode in North China, Hebei province. The main products are : Graphite Electrodes with RP/HP/UHP or customized according to your needs. Other Graphite products are: Graphite crucible, Graphite powder, Graphite rotor, Graphite tube, Graphite boat, Graphite rod, Graphite block, Graphite Anode, etc., from raw materials to finished products, strictly implement international standards. With the advantages of high strength, high temperature resistance, corrosion resistance, good performance in vibration, shows strong anti-oxidation activity, low resistivity and some other good characteristics. Learn more about graphite products, please click here to visit our website. https://www.hq-carbon.com/

Performance characteristics of ultra-high power graphite electrode in 400 arc furnace Our products are characterized by high strength, good electrical conductivity, good thermal shock resistance and low consumption, and are widely used in metallurgical, chemical and mechanical industries. 50 % of the products are sold well in 30 provinces, cities and autonomous regions in China, and 50 % are exported to more than 30 countries and regions including Southeast Asia, Japan and South Korea, Europe, the Americas, and Africa. Technical parameters of ultra-high power graphite electrode in 400arc furnace Specification for the Use of Ultra-High Power Graphite Electrodes in 400 Electric Arc Furnace Points to note for the use of graphite electrodes: 1, wet graphite electrode, dry before use. 2, remove the foam protective cap on the spare graphite electrode hole, check whether the inner thread of the electrode hole is complete. 3, clean up spare graphite electrode surface and hole thread with compressed air without oil and water; Avoid cleaning sand cloth with steel or metal brushes. 4, carefully rotating the connector into the electrode hole at one end of the backup graphite electrode(it is not recommended to load the connector directly into the electrode removed from the furnace), not to collide threads. 5, the electrode hanging equipment(recommended graphite hanging equipment) into the electrode hole at the other end of the backup electrode. 6, when lifting the electrode, loosen the soft material to the bottom of the end of the standby electrode connector to prevent the ground from hitting the connector; Lift the pendant ring with a hook, and the lifting electrode must be stable to prevent the electrode from loosening from the B end or colliding with other fixing devices. 7, hanging the spare electrode to the top of the electrode to be connected, pointing at the electrode hole and slowly falling; Rotate the backup electrode so that the spiral hook rotates with the electrode to drop; When the two electric extremes are 10-20mm apart, the exposed parts of the two ends and joints of the electrode are cleaned again with compressed air; When the electrode is finally completely decentralized, it must not be too violent. Otherwise, due to violent collisions, the electrode holes and joints will be damaged.

Customs code:8545190000 Properties: low resistivity, good conductivity, low ash, uniform and compact structure, good oxidation resistance, high mechanical strength. Introduction: graphite electrode, mainly petroleum coke, needle coke as raw material, coal pitch as binder, calcination, ingredients, kneading, molding, baking and graphitization, machining and made, which is released in electric arc furnace in the form of arc conductor of electricity to heat melting furnace charge, with low resistivity, good conductivity, low ash, uniform and compact structure, good oxidation resistance, high mechanical strength, etc. Product Parameters Item Unit Ordinary power graphite electrode High power graphite electrode Ultra High Power Electrode joint The diameter mm 100-350 400-500 200-350 400-500 250-500 200-500 Than the resistance ©m 6-9 7-10 6-7 6-7 4-5 4-7 Flexural strength Mpa 10-12 6.5-10 10-15 10-13 12-22 12-20 Modulus of elasticity Gpa 7-9 7-9.3 9-12 9-12 12-15 12-14 Thermal expansion coefficient / 1.8-2.9* 10-6 1.7-2.9* 10-6 1.6-2.2* 10-6 1.5-2.2* 10-6 1.4-2.2* 10-6 1.5-2.2* 10-6 The compressive strength Mpa 18-22 18-22 24-28 24-26 24-26 32-38 Bulk density g/cm³ 1.52-1.57 1.52-1.57 1.62-1.70 1.62-1.68 1.72-1.81 1.70-1.80 Ash % 0.3 0.3 0.3 0.3 0.3 0.3

Supplier: Graphite electrode cpc and dpc, graphite crucible, special graphite, graphite electrode joint
Services:

The premium electrode pads deliver a simple, drug-free solution for relief of achy, stiff or sore muscle and joint pain. Premium pads reusable up to 150 times Ruihe's premium pads are durable, comfortable and gently adhere to your skin. The pads may be reusable up to 150 times or five months. Product features Pre-gelled and self-stick Reusable up to 150 times Washable up to 10 times Safe and effective Non - irritating to skin Easy to clean Latex free

G9-power â?? E 6010,E 6012,E 6013 WELDING ELECTRODES E6013 electrode flux coating contains ferromanganese, cellulose, rutile, potassium silicate as a binder, and other siliceous materials. The potassium compounds allow it to operate with AC at low amperages and low open-circuit voltages E6013 rutile electrode for Mild steel. It welds on AC or DC with excellent performance and easy restrike feature 1. All-position electrode for the welding of mild steel. 2. Excellent choice for sheet metal lap and fillet welds. 3. Easy slag removal. 4. Manufactured under a quality system certified to ISO 9001 requirements 5. General purpose electrodes for welding mild steel. 6. Easy-striking, holds a stable arc with self-releasing slag for excellent shape and finish of the weld seam. Operates with AC or DC Power Sources Suitable for Arc Welders Generally Require Current in Excess of 115A Consult your Manual for Welding Safety Precautions 1. High Tensile Strength 2. Crack Proof Joints 3. High Penetration 4. Shiny and Excellent Surface Finish 5. Easy Slag Removal Sizes 2.50 mm x 350 mm 3.15 mm x 350 mm 3.15 mm X 450 mm 4.00 mm X 350 mm 4.00 mm x 450 mm 5.00 mm X 450 mm Chemical composition C% Mn% Si% S% P% 0.07 0.45 0.35 0.03 0.03 Approved By CE/BIS/IBR/BHEL/Cethar Vessels/