Slump Cone Test Apparatus

Salisbury's Self-Testing Voltage Detectors allow testing to be continuous and automatic. An intermittent flash and beep confirms the detector is functioning properly. Self-Testing Voltage Detectors are used to verify live or de-energized conductors. These testers may be used with rubber insulating gloves or hot sticks using the splined universal end fitting. Testers indicate the presence of voltage with an extra bright LED light and a distinctive audible signal. It is recommended that the tester be moved closer to the conductor until a warning is indicated, or it touches the conductor, apparatus, or elbow test point. Each tester requires three C batteries (included).

Features & Benefits: Do not assume conductors that have been tested de-energized will stay de-energized. Always install proper grounding devices before working. Failure to do so may result in serious injury or death. Dimensions in. (mm): 11 x 3.5 ( 279.4 x 89 )

Standard: BS 1377-5, ASTM D2435, AASHTO T216, NF P94 090-1

Designed to provide reliable results from a unit which is compact without sacrificing accuracy and repeatability. It comes with triple beam ratio and compact design ensures space saving.

It is used in soil compression test to detect the relationship between soil pressure and deformation, calculate the unit deposition, compression index, resilience index and consolidation coefficient of soil, etc.

The picture is for Mid pressure.

The Vibratory Compactor Set is supplied complete with:

Vibrating Hammer

Supporting Frame

Shank, 250 mm, long 0.6Kg

Small Tamping Foot, 100 mm dia. 1.2Kg

Standard :EN 13036-4, EN 1097-8, BS 7976, ASTM E303

The apparatus is suitable for both site and laboratory applications to perform two types of tests.

- For measuring pavement (road asphalt) surface frictional and skid resistance properties

- For polished stone value tests on aggregates (curved specimens) from accelerated polishing tests.

The skid tester is also suitable to perform tests on :

- Natural stones conforming to EN 1341, 1342

- Concrete block pavers conforming to EN 1338

The purpose of the test instrument is to calculate the maximum and minimum of cohesive soil porosity, and used to calculate the relative density, to understand the soil in the state of nature or the elastic after compaction and the stability of soil grain structure.

Technical Specifications:

Model

OBRK-10

OBRK-30

Max load

10KN

30KN

Sample dimension

D39.180 mm

D39.180 mm, D61.8125 mm

Strain rate

0.016-1.6mm/min.

six-speed mechanical transmission

0.0024-4.5mm/min.

16-speed mechanical transmission

Table stroke

Max. 50mm

Max. 90mm

Confining pressure

0-2Mpa

0-2Mpa

Back pressure

0-1.0Mpa

0-1.0Mpa

Volume change

0-50ml/0.1ml

0-50ml/0.1ml

Hole pressure

0-2Mpa

0-2Mpa

Axial displacement

0-30mm

0-30mm

Power

220V�±10%

220V�±10%

Machine dimension

350x300x1100mm (LxWxH)

500x430x1200mm (LxWxH)

Controller Dimension

500x500x925mm (LxWxH)

500x500x925mm (LxWxH)

Weight

170KG

180KG

Mini printer can order Separately.

Standard: ASTM D1559, D5581, AASTHO T245

Technical Specifications:

Model NO.

LWD-5

Max. Capacity

50KN

Test Rate

50.80mm / min

Cross Head Travel

70mm

Power

40V/220V,50Hz,400W

Net weight

100Kg

Packing size

690x420x790mm

1351 Clear glass Desiccator with porcelain plate
Product Description
It is a non-vacuum desiccator, and therefore has no stopcock. The sturdy glass top fits easily on the thick lip of the desiccator, and features a knob handle for removing or replacing the lid. The lips of both the lid and the desiccator itself are ground glass, and should be greased with petroleum jelly before use. In addition to helping create an air-tight seal, the grease also helps cushion the lid when it is set down in place. To help prevent damage from being set down too forcefully, the lid can be carefully slid on, or off, of the desiccator once greased. Desiccators can be used, though not exclusively, for preserving moisture-sensitive items, protecting hygroscopic or water-reacting chemicals, as well as removing traces of water from samples that need drying.
There are 8 sizes available : 120 mm desiccator, 150 mm desiccator, 180 mm desiccator, 210 mm desiccator, 240 mm desiccator, 300 mm desiccator, 350 mm desiccator, 400 mm desiccator.
Material: Glass
Color:clear
Key Product Features :
1. Removable Lid
2. Heavy duty
3. With a procelain plate

1352 Amber glass Desiccator with porcelain plate
Product Description
There are 8 sizes available : 120 mm desiccator, 150 mm desiccator, 180 mm desiccator, 210 mm desiccator, 240 mm desiccator, 300 mm desiccator, 350 mm desiccator, 400 mm desiccator.
Material: Glass
Color:amber
Key Product Features :
1. Removable Lid
2. Heavy duty
3. With a procelain plate

1354 Clear glass Vacuum Desiccator with porcelain plate
Product Description
Desiccators are sealable enclosures containing desiccants used for preserving moisture-sensitive items such as cobalt chloride paper for another use. A common use for desiccators is to protect chemicals which are hygroscopic or which react with water from humidity.
The contents of desiccators are exposed to atmospheric moisture whenever the desiccators are opened. It also requires some time to achieve a low humidity. Hence they are not appropriate for storing chemicals which react quickly or violently with atmospheric moisture such as the alkali metals; a glovebox or Schlenk-type apparatus may be more suitable for these purposes.
Desiccators are sometimes used to remove traces of water from an almost-dry sample. Where a desiccator alone is unsatisfactory, the sample may be dried at elevated temperature usingAbderhalden's drying pistol.
There are 7 sizes available : 150 mm desiccator, 180 mm desiccator, 210 mm desiccator, 240 mm desiccator, 300 mm desiccator, 350 mm desiccator, 400 mm desiccator.
Product Features : Various specifications; Preferential price;High quality
Material: Glass
Color:clear