DAVEX MK-30 is a new type of surface sizing agent that synthesized by the copolymerization of styrene and ester. It can efficiently combines with starch that endows starch coating layers with good cross lik intensity and hydrophobic properties. It has the advantage of less dosage, low cost and easy use. Also it has good film- forming property which can improve the water- resistance, ring- Cush strength of board paper and corrugated paper
Benefits: Effective waterproofing in a wide temperature range/ No affect the color of the paper/ Easy to disperse in water/ Less foam when operating/ Non- toxic to be contained in food packaging material
With our product name BONDOMNI 420 G, We produce SAE Anionic Surface Sizing Agent. Since BONDOMNI 420 G is anionic can be used in combination with weakly cationic auxiliaries. Application of BONDOMNI 420 G in the size press changes the wet ability of the Paper and reduces its water absorption. The presence of aluminium ions in the base Paper is not necessary for obtaining optimum results. Since BONDOMNI 420 G is anionic, it can be applied in the size press with fluorescent whiteners, direct dyes or basic dyes. The normal drying temperatures on the Paper machine are sufficient to develop full sizing. No additional curing period is required. It has good stability in the presence of large quantities of electrolytes.
Since SIZEOMNI 40S is cationic can be used in combination with weakly cationic auxiliaries. For adding SIZEOMNI 40S, the pH of solution should be 4. For enhance the SIZEOMNI 40S performance, cationic fixing agent should be required. Application of SIZEOMNI 40S in the size press changes the wet ability of the paper and reduces its water absorption. The presence of aluminium ions in the base paper is not necessary for obtaining optimum results. Since SIZEOMNI 40S is cationic, it cannot be applied in the size press with fluorescent whiteners and normal dyes or basic dyes. Only cationic dyes can be added in the solution. The normal drying temperatures on the paper machine are sufficient to develop full sizing. No additional curing period is required. SIZEOMNI 40S has good stability in the presence of large quantities of electrolytes. SIZEOMNI 40S can be added batch-wise to the starch solution storage tank as well as continuously in the operating tank or the feeding pipe to the size press. SIZEOMNI 40S is low foaming, so defoamers are normally not required.
Surface sizing agent. 200 kg drum
Introduction This surface sizing agent for kraft & corrugated paper has the advantages of less dosage, lower cost and easier operation. It can significantly improve the water-resistance and ring crush strength Of board paper, corrugated paper and fine paper. Specification Appearance: white to light brown liquid Ph value: 3-5 Solid content: 30%(±2%) Water solubility: easy Viscosity: max. 30 cp. S(25) Ionicity: cationic Shelf life: 6 months Package and storage Packed in 200kg or 1000kg plastic drum. The product should be stored under the condition of 4-25, and the proper temperature should be below 30. Notice Application temperature should be below 75.
Appearance: Light green yellow to white powder Solubility: Easily soluble in hot water PH Value:
Surface Sizing Agent is a synthetic copolymer of high molecular emulsifier and styrene ester monomer. It mixes well with starch and provides the starch coating with excellent cross-linking strength and hydrophobic property. It's featured by low consumption, free odor, low foaming, long foam inhibition period and excellent film forming, and it can significantly improve the water resistance capability and ring pressure strength of corrugated paper and cardboard paper. It is a sufficient substitute for internal sizing agent and has no maturation period. It is applicable to various types of surface sizing machines. Advantage: Low consumption, low sizing than internal (pulp) sizing and AKD type of surface sizing. The paper can be fully cured after reeling down. Strong water-resistant performance. Features: The cationic surface sizing agent needs some aluminum sulfate to perform well. The product series adapt to all high and low speed paper machines. Good Moisture Resistance, effectively prevent the reduction of RCT. Anionic the surface strength for culture for cultural paper.
Surface Sizing Agent(styrene acrylic basic) can significantly improve the water resistance and ring crush strength of corrugated board packaging paper, no maturation period,can be used with the original starch, has little dependence on aluminum sulfate, and has excellent Mechanical stability.
Product description: SS66 is a new and highly efficient cross-linking of starch sizing agent for corrugated paper surface sizing. SS66 is added to starch and produce cross-linking reaction with starch, grafted the starch molecules into the hydrophobic groups, thereby effectively improve the surface water resistant properties of corrugated paper. Water resistance produced by the cross linking reaction is of very stability without the impact of fluctuation in climate and the system, solving the resurgence problem of corrugated paper in the summer rainy season. At the same time, under condition of substituting 15%-20% starch, it maintains or further improves the paper ring crush index, has very good strength, which is the ideal product to replace the traditional sizing agent Technical indicators: Appearance: Light green fine particles and powder Solubility: Soluble well with starch Storage period: 6 months Use Method: Feeding raw starch and amylase(or ammonium persulfate) in proportion to gelatinize, heated to 90 degrees, add SS66 to the starch solution(tons of paper consumption 7kg-12kg), stir evenly, keep the temperature for 15~20 minutes, filter before on the machine sizing. It can replace 15%~20% starch. (Our company can provide detailed starch gelatinization process for reference) Packaging and storage: This product is a solid particle, convenient to transport and use, placed in dry, ventilated, cool place. Do not in contact with water to prevent the dissolution loss. Packing in 25kg plastic bag.
Product overview: With the rapid development of China's economy, it has been the trend to change the sizing process of traditional box board paper and corrugated board from the combination method of traditional internal sizing and surface sizing into complete surface sizing. Our company has developed new AKD modified surface sizing agent SA2600 through concentrated development for many years. The product is aggregated by various cation materials through special process and added the cross-linking resin synergist. The product can greatly boost the sizing effect, reduce the AKD hydrolysis and improve paper moisture regaining. The product not only can provide excellent high water-resistance performance, but also can boost the surface strength of paper. The product is used in the box board paper and high-strength corrugated paper produced from waste carton. Technical specifications Appearance: Milky white liquid Solids content: 25 �±1% pH value: 2-4 Viscosity: â?¤ 50 mPa.s (25 oC) Ionic type: Cation Solubility: Soluble in water. Performance characteristics 1. It owns excellent water resistance performance and thermal water resistance performance. 2. It can shorten the curing time, and isn't easy to regain moisture. 3. The consumption of internal sizing agent is reduced to decrease production cost. 4. It can significantly improve the interface strength of paper. 5. Compared with the Cation styrene acrylic surface sizing agent, the product reduces its dependence on aluminum sulfate. The less or no aluminum sulfate can be used to improve the paper folding resistance. 6. The product is good in mechanical stability, and few bubbles are generated in the operation process. 7. The product can be used separately or matches with styrene acrylic surface sizing agent. Usage tips Consumption: In case of separate use, 2-6 kg/ton paper is used. In case of matching with styrene acrylic surface sizing agent, the 1-3 kg/ton paper is used. The specific consumption needs to be adjusted according to the water absorption indicator requirements. During use, the pasted starch glue solution is cooled to below 65�°C, and the stock solution of the product is added to the starch glue solution tank, and is mixed evenly before sizing; Or the metering pump is used to add starch glue solution to pipeline for continuous adding. Starch glue solution can be added aluminum sulfate or not according to the actual conditions. The PH value of glue solution in glue solution tank is controlled at 3.5-4.5 upon the use of aluminum sulfate. In case of matching with styrene acrylic surface sizing agent, the aluminum sulfate of glue solution in sizing tank is controlled at 3.5-4. Packing and storage It is packaged in 200kg and 1000kg plastic bucket and is stored in cool place (5-30C) to avoid freezing and solarization. Storage life: 3 months