I Shape Steel Bar Grating Panel

Stainless steel tube is a hollow long strip steel made of stainless-steel material. Because of its excellent corrosion resistance, it is mainly widely used in petroleum, chemical, medical, food, light industry, mechanical instruments and other industrial transportation pipelines and mechanical structural components. In addition, when the bending and torsion strength are the same, the weight is light, so it is also widely used in manufacturing mechanical parts and engineering structures, but also commonly used in the field of furniture decoration. Stainless steel pipe is divided into seamless pipe and welding pipe according to the production mode, seamless steel pipe can be divided into hot rolling pipe, cold rolling pipe, cold pulling pipe and extrusion pipe, etc., cold pulling and cold rolling is the secondary processing of steel pipe; welding pipe is divided into straight welding pipe and spiral welding pipe. Stainless steel pipes can be divided into round tubes and different tubes according to the cross-sectional shape. The form tubes have rectangular tubes, rhomboid tubes, ellipse tubes, hexagonal tubes, octagonal tubes and various cross-sectional asymmetric tubes. It can be divided into Austenitic Stainless Steel Tube Ferritic Stainless Steel Tube Martensitic Stainless Steel Tube and Duplex Stainless Steel Tube by the type of stainless steel.

Material * ASTM(1005,1006,1008,1010,1015,1020,1025,1030,1035,1040,1045,1050,1055,1060,1065,1070,1080,1084,1016,1022) * DIN(Ck10,Ck15,Ck22,Ck25,Ck30,Ck35,Ck40,Ck45,Ck50, 30Mn4,40Mn4) * BS(040A04,095M15,045M10,080A40,045M10,080M50) * Thickness : 0.1mm-300mm or as required * Standard : AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc. * Technique : Hot rolled,cold rolled Surface Treatment * Clean, blasting and painting according to customer requirement Thickness tolerance + 0.1mm * Application : It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts. * Shipment time : Within 7-15 workdays after receiving deposit or L/C Export packing : Waterproof paper, and steel strip packed. Standard Export Seaworthy Package.Suit for all kinds of transport,or as required Capacity : 250,000 tons/year * Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel are generally used to make mechanical structural parts Warehouse Storage * Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.

Standard : JIS, AISI, ASTM, GB, DIN, EN, BS ETC. Material 201 301304L 309S 316L310S321410 4302205 2507 904L INCOLOY Alloy HASTELLOY MONEL etc Specifications Round bar Diameter : 0.1~500mm Hexagonal bar Size : 2mm~100mm Flat bar Thickness : 0.3~200mm Width : 1~2500mm Square bar Size : 1mm*1mm~800mm*800mm Length : 2m, 5.8m, 6m, or as required. Surface : Black, peeled, polishing, bright, sand blast, hair line, etc. Price Term : Ex-work, FOB, CFR, CIF, etc. Export to : Singapore, Canada, Indonesia, Korea, USA, UK, Thailand, Peru, Saudi Arabia, Viet Nam, Ukraine, Brazil, South Africa, etc. Delivery Time : Standard size is in stock,prompt delivery or as order's quantity. Package : Export standard package, bundled or be required. The inner size of container is below: * 20ft GP: 5.9m(length) x 2.13m(width) x 2.18m(high)about 24-26CBM * 40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM * 40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM Use of stainless steel round bar: 1. It is used to manufacture self tapping screws such as bolts and nuts; 2. Used for manufacturing rivets; 3. Used for making spring steel wire and transmission mechanism parts; 4. It can be used for filling and strengthening in welding materials; 5. Main parts and components that can be used to manufacture molded articles; 6. It can be made into welded pipe for deep processing of seamless steel pipe or raw material of seamless steel pipe. 7. It is widely used in petroleum, chemical, food and other industries 8. It can also be used in shipbuilding, boiler and pressure vessel manufacturing, etc. 9. Mainly used for automobile parts: axle parts, such as automobile half axle sleeve and various small bearing shells 10. Mainly used for bicycle accessories: bicycle frame tube and various frame joints 11. Widely used in hardware products factories and machinery manufacturers 12. Widely used in various vehicle parts 13. Wide application and furniture decoration industry 14. Widely used in various mechanical equipment 15. Widely used in various pipelines 16. Widely used in various construction machinery 17. Applied to household appliances 18. Applied to electronic communication equipment

* Ordinary low alloy steel is a kind of ordinary alloy steel containing a small amount of alloy elements (in most cases, the total amount of w does not exceed 3%). This kind of steel has high strength, good comprehensive properties, corrosion resistance, wear resistance, low temperature resistance, and good cutting and welding properties. * Under the condition of saving a lot of rare alloy elements (such as nickel and chromium), usually 1 t ordinary low alloy steel can be used for 1.2-1.3 carbon steel, and its service life and scope of use are much longer than carbon steel. Ordinary low alloy steel can be smelted in open hearth furnace and converter with general smelting method, and the cost is close to that of carbon steel. Material : API5L Thickness : 0.1mm-300mm or as required Standard : AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc. Technique : Hot rolled,cold rolled Surface Treatment : Clean, blasting and painting according to customer requirement Thickness tolerance : �±0.1mm Application : It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts. Shipment time : Within 7-15 workdays after receiving deposit or L/C Export packing : Waterproof paper, and steel strip packed. Standard Export Seaworthy Package.Suit for all kinds of transport,or as required Capacity : 250,000 tons/year * Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel are generally used to make mechanical structural parts.

We deals in the following products of India, China, Taiwan and Korea Origin:- 1)Hot Rolled Steel (Hot Rolled Sheets, Hot Rolled Coils, Hot Rolled Plates, Hot Rolled Bars etc) 2)Galvanized Steel (Galvanized Steel Tapes, Galvanized Steel Wires, Galvanized Steel Strips, Galvanized Steel Coils, Galvanized tubes etc) 3)Cold Rolled Steel (Cold Rolled Steel Strips, Cold Rolled Steel Coils, Cold Rolled Sheets etc) 4)Stainless Steel (Stainless Steel Strips, Stainless Steel Coils, Stainless Steel Wire, Hardened and Tempered Spring Steel, Stainless Spring Steel, Spring Steel Wires etc) 5)Steel Tube and Pipes ( ERW, CRW, CRS, Black, Galvanized, Stainless ) 6)Forged Column Clamps, Girder Clamps, Pressed Clamps, Rapid Clamps, Support Clamps & Wedge Clamps. 7)Heavy Duty Props & Light Duty Props. 8)Nuts, Bolts, Nails & Fastners 9)System Scaffolding, Base Plate & Adjustable Base. 10)Steel Tie Rod, Waller Plates and Wing Nuts. 11)Drop Forged and Pressed Sheet Metal Couplers of all types. 12)Steel Billets, Steel Angle & Steel Channels.

We deals in the following products of India, China, Taiwan and Korea Origin:- Stainless Steel Sheets