3003, an Al-Mn alloy, which is the most widely used rust-proof aluminum. The strength of this alloy is not high (slightly higher than industrial pure aluminum) and it cannot be strengthened by heat treatment. Therefore, cold processing method is used to improve its mechanical properties.
In the annealed state, high plasticity. When the semi-cold hardening, the plasticity is still good, when the cold hardening, bad plasticity and machinability, but good corrosion resistance and weldability.
For low load parts that require high plasticity and good weldability to work in liquid or gaseous media. Such as 3003H24 fuel tank, gasoline or lubricant conduit, various liquid containers and other deep-drawn low-load parts, and wire rods are used to make rivets.
Bending performance: The conventional 90-degree bend, and below 0.8 can meet the requirement of short-edge roofing application.
Coating Application: Roofing sheet, ceiling, interior decoration,curtain wall, ACP.
3003, an Al-Mn alloy, which is the most widely used rust-proof aluminum. The strength of this alloy is not high (slightly higher than industrial pure aluminum) and it cannot be strengthened by heat treatment. Therefore, cold processing method is used to improve its mechanical properties. In the annealed state, high plasticity. When the semi-cold hardening, the plasticity is still good, when the cold hardening, bad plasticity and machinability, but good corrosion resistance and weldability. For low load parts that require high plasticity and good weldability to work in liquid or gaseous media. Such as 3003H24 fuel tank, gasoline or lubricant conduit, various liquid containers and other deep-drawn low-load parts, and wire rods are used to make rivets. Bending performance: The conventional 90-degree bend, and below 0.8 can meet the requirement of short-edge roofing application. Coating Application: Roofing sheet, ceiling, interior decoration,curtain wall, ACP.
3 Roda Mosquito Qoil - The original product from Indonesia. - Can Expel Mosquito and Insect. - Type Available : - 8 Hours Green - 8 Hours Green Refill - 10 Hours Green - 10 Hours Red - 12 Hours Green
Supplier: Aluminum and copper lugs
frozen pork meat, frozen fish, wood pellets, wood shavings, epal pallets, european wooden pallets, hard wood charcoal, firewood, skipjack tuna fish, toilet tissue, milka chocolate biscuit, copper scrap, hms scrap, nutella chocolate, pork feet, urea fertilizer, icumsa 45 sugar, nido milk powder, full cream milk powder, skimmed milk powder, wheat flour, refined sunflower oil, palm oil cp8, toasted sesame oil, refined sesame oil, 1121 basmati rice, almond nuts, aptamil baby milk, bananas, bebelac infant milk, redbull energy drinks, xl energy drinks, coca cola, fanta, pepsi, sprite, colgate toothpaste, pampers diapers, dove bar soap, dove spray, ferrero chocolate, fresh eggs, kinder joy, pistachio nuts, walnuts, mozzarella cheese, toblerone, nutrilon milk, pig premix, ldpe scrap, hdpe scrap, paraffin wax
Buyer: Aluminium scrap
Specifications 1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance Description It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc. Specification Data Solvent: Water Pigment: Non-lead pigment Theoretical Solids By Volume: more than 50% Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat Coverage varies considerably depending on application methods and surface roughness and porosity. Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places. Recommended Film Thickness: Wet: 80 micron Dry: 30 micron Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours Recoat : 2-3 hours Application: Brush, Roll, conventional spray or Airless Spray. Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water. Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%) Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%) Airless spray: do not thin Clean-up: Clean up equipment with water Typical painting system Substrate System All kinds of Wall surfaces 1.Alkali Resistance Primer (1 coat) 2.Emulsion Wall Paint (2 coats)
High-quality aluminum sheets and coils, offering superior durability and flexibility for various industrial applications. Our aluminum products are manufactured with precision, ensuring uniform thickness and strength across each batch. Ideal for construction, automotive, and aerospace industries, our aluminum sheets and coils are designed to meet the highest standards of quality and performance. Available in various grades and sizes to cater to all your project needs.
Ready stock Hartalega Coats 200 pcs ready stock.
3ply face mask comfortable for user. The face mask is latex free and use brand new hypoallergenic material, odourless and lint free. Product Disposable 3-Ply Non-Woven Face Mask with Ear Loop Size 18cm x 9.5cm (18cm after expended) Color Blue/Green/White/Yellow/Pink or can be customized Outer Layer Spund-bound PP Nonwoven: 20 - 25 gsm Filter Medium Meltblown PP Nonwoven: 18 - 20gsm Inner Layer Lint free ES Nonwoven: 25 gsm Nose Piece Aluminum Packaging 50 pieces per box or 50pcs per bag; 10 boxes/bags per carton. 1600 cartons/20 ft container , 3200 carton/40 HQ container. MOQ 50,000 pieces min order Quantity: 10,000PCS/Day MOQ : 10,000 pieces Packaging: 50 pieces per box/bag; 40 boxes per carton. Payment condition: TT Shipping Duration: 7 Days ( ONE WEEK) Origin: Thailand/China Condition: Subject to availability
We have range of patch fittings suitable for 8-15mm tempered glass doors. 1. Our patch fittings are suitable for 10mm, 12mm tempered glass doors 2. Bottom Patch fitting. 3. Top patch fitting. 4. Side Over panel. 5. Top center 6. Inserts available for most of the floor springs. 7. Aluminum, SS304. 8. Polished Stainless steel, Satin Stainless steel,aluminium oxsilver ,Aluminum Gold color.
We are engaged in offering excellent quality Door Hinges to our valuable clients. 1. 4"x3"x3" with 2ball bearing 2. Material: q235 ,ss201,ss304, ss316 3. Size:101.6x76.2x3mm Color available: Brushed Chrome, Stain Nickel, Yellow Zinc, Antique Brass, Bright Brass, Polished Brass, Polished Chrome, Dull Brass, Brushed Zinc, Oil Rubbed Bronze, Antique Nickel, Antique Bronze, Primed Coating White, Primed Coating Black, Primed Coating Gray, Golden Finish.
