API 16C 2-1/2", 3", 3-1/2" and 4" Coflex flexible hoses
Coflex flexible hoses are for drilling and service both onshore and offshore in applications as choke and kill lines. Choke and kill lines are essential to control the well control equipment. Coflex flexible hoses are specifically designed to handle the high pressures and flow rates this use requires.
Working Pressure: 5,000 Psi, 7,5000Psi, 10,000Psi
Temperature: -20Ë?Cï½?+121Ë?C
Connection: Welding or integral forged unions, flanges, clamp connection type, or can be designed according to
Recommended For: Flexible hose between the riser and manifold or around the ball joint of offshore drilling rigs, specially designed to withstand high pressure. Tube: Modified Nitrile. Black. Resists abrasion, corrosion, oil, and up to 20% H2S. Reinforcement: Multiple layers of textile fabric and steel cable, with one layer middle rubber placed between cable layers. Cover: Fire resistant rubber cover, stainless steel armored to handle abrasion, corrosion, cutting, gouging, oil and weather. Couplings: Swaged couplings. Full range of couplings are available, such as hammer unions, flanges, camlock, male thread, etc. Temperature: -4 to +200 (-20 to +93) continuous service. Options: Accessories such as safety clamps and hose lift eyes are available upon request. Test: Each hose is tested at 22500psi for 15 minutes. Pressure test graph, test certificate and letter of conformance are issued for each hose.
Recommended For: Flexible hose between the riser and manifold or around the ball joint of offshore drilling rigs, specially designed to withstand high pressure. Tube: Modified Nitrile. Black. Resists abrasion, corrosion, oil, and up to 20% H2S. Reinforcement: Multiple layers of textile fabric and steel cable, with one layer middle rubber placed between cable layers. Cover: Fire resistant rubber cover, stainless steel armored to handle abrasion, corrosion, cutting, gouging, oil and weather. Couplings: Swaged couplings. Full range of couplings are available, such as hammer unions, flanges, camlock, male thread, etc. Temperature: -4 to +200 (-20 to +93) continuous service. Options: Accessories such as safety clamps and hose lift eyes are available upon request. Test: Each hose is tested at 22500psi for 15 minutes. Pressure test graph, test certificate and letter of conformance are issued for each hose.
Recommended For: Flexible hose between the riser and manifold or around the ball joint of offshore drilling rigs, specially designed to withstand high pressure. Tube: Modified Nitrile. Black. Resists abrasion, corrosion, oil, and up to 20% H2S. Reinforcement: Multiple layers of textile fabric and steel cable, with one layer middle rubber placed between cable layers. Cover: Fire resistant rubber cover, stainless steel armored to handle abrasion, corrosion, cutting, gouging, oil and weather. Couplings: Swaged couplings. Full range of couplings are available, such as hammer unions, flanges, camlock, male thread, etc. Temperature: -4 to +200 (-20 to +93) continuous service. Options: Accessories such as safety clamps and hose lift eyes are available upon request. Test: Each hose is tested at 22500psi for 15 minutes. Pressure test graph, test certificate and letter of conformance are issued for each hose.
PME 5,000 psi W.P. 10,000 psi Test- Grade D- 12,500 psi Minimum Burst PME 7,500 psi W.P. 15,000 psi Test- Grade E- 18,750 psi Minimum Burst Flexible connection between standpipe and swivel (Rotary Drilling) or between pump and standpipe (Rotary Vibrator) for pumping mud at extra high pressure in oil drilling and exploration work. Meets the high demands of directional drilling and down linking with negative pressure pulses and elevated temperatures. This hose can also be used as a Motion Compensator hose for stabilization of rotarydrilling and pumping equipment against vertical wave action on offshore drill platforms. The Motion Compensator hose is not recommended for phosphate ester fluids. Certification/Standards:API Spec 7K ISO 14693 ABS approval
Supplier: Oil field hose, high pressure manifold coflex hose, rotary hose, plug valve, swivel joint, pipe straight, integral connector, cementing & circulating hose
Union Connection & Thread Connection Plug Valve Plug Valves with rated working pressure of 42MPa, 70MPa, 105Mpa, 140Mpa (6000Psi, 10000Psi, 15000Psi, 20000Psi) are available. The end connection can be of union, LP, TBG thread. All the plug valves are made as standard API 6A and NACE MR 0175, and can be connected with other similar products in the world. The repair kits can be interchanged with the same type of valves of SPM. Various models of plug valves are relevant repair kits for normal temperature, low temperature and sour gas conditions are available. The plug valves, treated with special coating
H2S service API 16C Chiksan Swivel Joint Swivel Joint is a mental pipe adapter installed with roller bearings based on the introduced technology from FMC and our technical innovation. The swivel joints with size ranging from 1â?? to 4â?? and rated working pressure rang of 25-140MPa (3626 PSI-20 000PSI) are available. Various models of swivel joints and relevant repair kits for normal temperature, low temperature and sour gas (H2S) condition can be provided. Long Radius Swivel Joints 10,20,30,50,60,80,100 types for option; Short Radius Swivel Joints 10,20,30,40,50,60,70,80 types for option.
Petroleum drilling and production Straight pipe Assy PME 2â?? 3â?? 4â?? 10K 15K Straight Pipe Assy High Pressure LP Union Flange Keywords:pipe straight,pipe joints,straight pipe assy,oilfield Straight pipe is a pipeline with thread,flange or union connectors on both end,and widely used for petroleum drilling and production,cementing&fracturing and testing operations. The straight pipes with size ranging from 1â?? to 6â?? and rated working pressure range of 14-140MPa(2000psi-20000psi) are available.We can provide various straight pipes working in normal temperature,low temperature and
