Introduction of sawdust extruder Machineï¼?
The charcoal produced by charcoal machine is called extruded charcoal which is made by extruding either raw ground wood or carbonized wood into logs without the use of binder. The heat and pressure in the extruding process hold the charcoal material together. The general charcoal production flow can be Raw Material Crushing--Drying--Shape Forming--Carbonization--Final products. So the charcoal machine shall be crusher-dry-charcoal machine(shapes:logs, rods, briquets, etc.)-carbonization furnace and other auxiliary equipment.
sawdust extruder machineï¼?
the brife introduction of the sawdust extruder machine
The machine is a latest sawdust exturder machine which can compress sawdust, bamboo, wood, shells, straw and other waste biomass materials into rod briquettes. After carbonization, people can get the charcoal sticks to make cooking or boiling,which is more environmentally friendly.
Work process Wood shavings from the major, sawdust and other waste materials, ratio of mixing with the glue, by drying, sizing, hot-pressing machine production of wood shavings heated pressurized, sawdust foot pier Advantage of production 1. The surface smooth, waterproof good (soaked for 48 hours without cracking, sun and wind do not crack), with strong nails, 2. Customized according to customer requirements size of export exemption to avoid fumigation, formaldehyde emission (e2 can provide sgs) are in line with national standards, its internal bonding strength of up to 1.07mpa, the vertical grip for the screw strength 1590n, flat behavior 1660n is the production of wooden pallet fumigation-free stands (foot pier, frame legs) an ideal material
GYJ series extrusion machine is the special equipment of making the P fixed- end anchorage. It is light and simple operation etc, and can squeeze BFM 15P and BFM13P extruding set. Model:GYJ 500 Rated extrusion pressure:495KN Extrusion hydraulic: 63Mpa Stroke:150mm Mass:70kg. Overall dimension:760x200x200.
On the basis of absorbing foreigh advanced technology.Plastic extruding flat film stretching line is used by micro-processor control frequency conversion and silicone controlled dc etc.The main parts use foreign quality products.The line on large l/d ratio and mixing smelt section on the extruder screw for which is specially parts using quality steel, for the filter changing system we apply advanced foreign automatic filter changing structure.The heating board is changed into advanced stretching hot air oven and principal technical index of the line reach international advanced level.The line has the performance of high speed.Top yield, low energy consumption., good forming quality of the fiber dru.The structure of the line is compact with a pleasing appearance smooth running, flexible and reliable control sophisticated Diameter of screw¡¨ºo65mm
This machine uses the polypropylene(pp) or high density polyethylene(hdpe) material to produce tapes for ppwoven bags, weaving through production procedures of material heating & extruding, splitting the film into tapes.Stretching & forming tapes, and then winding on the bobbins by winding machine, finally put the bobbins with tapes on circular loom for weaving. The tape extruding & stretching machines are our, with the use of special and advanced technology, we have refored this series machine many times.Through iproving, the machine can be fit for all kinds of pp&pe material, such as 100% recycled material, powder or grain material, to produce tapes.The screw and barrel of extruder are ade of high quality 38croa1a alloy steel, the hardness is over hv950 after nitriding treatment.It has the performance of easy operation & Motor power of extruder is 18.5kw Heating power of extruder is 24kw Width of die-lip is 600mm Diameter of drum is 320mm Number of arch heating plate is 2pcs Heating power of the plate is 15kw Stretching ration is 4-7 Production capacity is 30-80kg/h Winding speed is 20-150m/min Number of winder is 100spindles System installed capacity is 98kw Normal operational capacity is 64kw Weight is 8000kg Overall dimension(j*w*h) is 23600*2500*1800mm
This machine is absorbed from international advanced technical and manufactures by ourself, which major in producing monofilament yarn by hdpe and pp material The monofilament yarn can be widely used for rope, fish-net, safe construction net, article hair, mosquito nets brushes as well as protectives nets for the cotton fields. The assembly is compacted in its structure.Ad motor is used for drawing thus a synchronous speed regulation and a single speed regulation can be achieved to meet the different parameters.The spinnerets produced by the most advance way so that the flatness and eveness of the filaments can be ensured.Stability in motion, sensitiveness in control, convenience operation, high safety and reliability. ¡êabrush monofilament ¡êaropes ¡êafishing line ¡êafishing nets ¡êavelcro monofilament ¡êamosquito nets ¡êazipper onofilament ¡êaconstruction safety nets Model is sj-ys-45 Diameter of screw¡ê¡§mm¡ê© is 45 Rotation of screw¡ê¡§r/min¡ê© is 10-50 Capacity¡ê¡§kg/h¡ê© is 20-45 Diameter of yarn¡ê¡§mm¡ê© is 0.1-0.35 Line speed¡ê¡§m/min¡ê© is 100-150 Number of spindlers is 100 Install power¡ê¡§kw¡ê© is 90 Overall dimensions¡ê¡§m¡ê© is 23*1.7*1.7
Parameter specification Jo-65jo-70jo-80jo-90 Specification/parameterdouble-shaftdouble-shaftdouble-shaftbig-shaft Pay-off typepn400-630pn400-630pn400-630pn630-800 Pay-off bobbin¬)65¬)70¬)80¬)90 Screw diameter26:1 bm type26:1 bm type26:1 bm type26:1 bm type Screw l:d120140200250 "extrusion Capacity(kg/h)"25hp30hp40hp50hp Main motor power¬)0.8-¬)1.0¬)1.5-¬)12¬)2.0-¬)20¬)3.0-¬)25 Range of wire diameter(mm)"single layer/ U shape""single layer/ U shape""single layer/ U shape""single layer/ U shape" Cooling device 250m200m200m200m Length of accumulating 5hp5hp7.5hp7.5hp Haul-off power500m/min500m/min400m/min400m/min Line speed (max)double axis/axisdouble axis/axisdouble axis/axisdouble axis/axis "take-up Type"pn500-630pn500-630pn500-630pn500-630 "take-up Bobbin"4hp4hp5hp5hp.
1reasonable structure , new , stable , high speed , round trip quality control 2.High automatic & intellect monitoring , perfect winding displacement . 3.Jo-»65+35 double color automobile cable extruder : selected at customerf+s requirement 4.Initiative wire pay-off, flyer pay-off , quincunx take-up, auto coiler take-up and complete plc control.
Screws and barrels for extruder machine Depth of nitrated layer: 0.5-0.8mm Hardness of nitration: 900-1020hv Fragility of nitration: less than grade 1 Surface roughness: ra 0.4um Surface hardness of nitrated cr coating layer:í²950hv Hardness of bimetallic layer: hrc55íp-72íp Thickness of cr-coating layer: 0.03-0.08mm Depth of bimetallic layer:ú+2mm Specifications of screw: ª)20-ª)250 l/d 15-50 we offer various types of extruder screws and adjust to different compression ratio, which can fulfill customer's requirement perfectly.
Drying /Fresh noodle process line/production line Noodle machine is a kind of equipment which can extrude flour into noodles with necessary tenacity and humidity by relative rotation of flour roller. It can be divided into simple noodle machine, automatic picking noodle machine, assembly line noodle machine, automatic spaghetti machine and so on. The automatic noodle machine is easy to operate, safe and hygienic, and suitable for eyes. Stable transmission, accurate and efficient transmission power, low noise, no vibration, superior performance and other characteristics, can be equipped noodle drying equipment. Capacity 150kg -1300kg/hour ,big capacity can customized . Noodle shape: round ,flat from 1.5mm-10mm big to 20mm . Can equipment noodle drying machine ,noodle packing machine .
