Available in 400/360/320/272/240/224/176/152/120 pages
Softcover
Ruled
Paper: 64 gsm
Size: A4
Dimensions: 29.7cm*21cm
Perfect Binding
LIQUIFIED NATURAL GAS (LNG) Origin: Kazakhstan Quantity: 50,000-100,000 MT Trial LIFT Quality: LNG Price TTO $260 Gross/$240 Net Per Metric Ton Price CIF;$290 Gross/$270 Net Per MT Payment Terms MT103/TT/DLC/LC/ESCROW/BTC Below profcedures are NOT NEGOCIABLE. CIF STANDARD TRADING PROCEDURE 1. Buyer issues ICPO with Company Profile and Buyer Passport Copy, Companys registration Copy. 2. Seller acknowledges ICPO and issue to Buyer a Letter of Acceptance and Guarantee. 3. Seller issue Draft Contract SPA to Buyer. Buyer review SPA open for any amendment, sign and return to Seller for approval. 3. Seller registers and legalizes the signed Sales and Purchase Agreement contract and provides the registered, legalized and notarized SPA including PPOP as listed below. A. Certificate of Origin. B. Commitment to Supply. C. certificate of conformity D. Statement of Availability of the product. E. Product Export license for Allocation Issued by Ministry F. Allocation invoice 5. buyer secures allocation from the refinery (securing allocation at buyers expense). 6. Upon buyer securing allocation, Seller issues and register the Full set of POP with the Ministry of Energy and Justice, and with the loading Port Authorities, and charter of vessel for product Shipment. 7. Seller send to Buyer the full set of POP documents, vessel documents including SGS report at Origin Country to Buyer (by Bank to Bank and by email). Loading commence according to shipment schedule for departure from origin port within the specified working days after Buyer final notification of POP verification and Confirmation. POP DOCUMENTS: a)Certificate of Incorporation b )Act of Transfer c) Commercial Invoice d) Company Tax Payers Certificate e) Fresh SGS Report at Loading Port f) Tank Receipt g) Vessel Q&Q and Quality Specification h) Bill of Lading i) Certificate of Non-Wooden Package j)Notice of Readiness (NOR) k) Estimated Time of Arrival (ETA) l) Authorization To Sale (ATS) m) Cargo Declaration / Conforming Warrant n) Charter Party Agreement (CPA) to transport the product to the Discharge Port o) Ullage Report p) Customs Declaration Certificate. q) Product Allocation Certificate r) Notarized NCNDA/IMFPA and Endorsed by Seller Bank 8. within 3 banking days of the Vessel arrival at Buyer destination port, upon Buyers Confirmation and satisfaction with product buyer makes payment via TT/MT103 to Seller against Shipping documents and Title transfer. 9. Product discharged into Buyers storage.
LIQUIFIED NATURAL GAS (LNG) Origin: Kazakhstan Quantity: 50,000-100,000 MT Trial LIFT Quality:LNG Price TTO;$260 Gross/$240 Net Per Metric Ton Price CIF;$290 Gross/$270 Net Per MT Terms;MT103/TT/DLC/LC/ESCROW/BTC Below procedures are NOT NEGOTIABLE. TANK TO VESSEL TAKE-OVER STANDARD PROCEDURE 1. Buyer issues official ICPO with company registration, buyers passport data page and banking details. 2. Seller issues MOU to buyer and buyer signs and send back to seller 3. Upon receipt of the countersigned original MOU from the buyer, seller emails to buyer the below listed documents:- 1) Certificate of Product Origin 2) Product Passport (Quantity & Quality Dip Test Analysis Report) 3) Bill of Lading 4) Tanker Vessel Q88 5) Cargo Manifest 6) Payment invoice for Title Takeover, 7) Ullage Report. 4) Upon buyer receipt of the documents, within 48 hours buyer contact the vessel captain and verifies the shipping documents of the product onboard the tanker vessel and pays 5% of the cargo value for the title takeover which amount to the sum of $450,000.00 5) Upon seller receipt of the title takeover payment, Seller transfers the title to the potential buyers company's name and issues all documents to the buyer company's name and send via swift from sellers bank to buyers bank the full prove of product documents. 6) Buyer carries out the CIQ/SGS inspection and upon a successful inspection; buyer pays via TT MT103 for the full product to the seller and after commences vessel to vessel transfer of the product. 7) The inspection at the loading port still remains the Russ Standard GOST R Quality and Quantity Analysis Report while inspection at the discharge point will be performed by Societe General De Surveillance SGS or CIQ at the expense of the potential buyer
Available in 400/360/320/272/240/224/176/152/120 pages Softcover Ruled Paper: 64 gsm Size: A4 Dimensions: 29.7cm*21cm Perfect Binding
Available in 400/360/320/272/240/224/176/152/120 pages Softcover Ruled Paper: 64 gsm Size: A4 Dimensions: 29.7cm*21cm Perfect Binding
Available in 400/360/320/272/240/224/176/152/120 pages Softcover Ruled Paper: 64 gsm Size: A4 Dimensions: 29.7cm*21cm Perfect Binding
Available in 400/360/320/272/240/224/176/152/120 pages Softcover Ruled Paper: 64 gsm Size: A4 Dimensions: 29.7cm*21cm Perfect Binding
Available in 400/360/320/272/240/224/176/152/120 pages Softcover Ruled Paper: 64 gsm Size: A4 Dimensions: 29.7cm*21cm Perfect Binding
Available in 480/380/340/280/240/180 pages Softcover Ruled Paper: 64 gsm Size: A4 Dimensions: 29.7cm*21cm Piral Binding
Basic Parameters Dimensions: 201 x 99 x 35 mm Weight: 333g Adapter Input: AC 100 ~ 240 V Output: DC 24V 2.65A Display mode Segment LCD with white backlight + LED in red and green Function Introduction Charge Active, pre-charge, constant current and constant voltages are the stages of charging mode. The initial charging mode depends on the battery voltage, so active and pre-charge don't happen to every batteries. For charging mode and current, please refer to the paragraphs of charging mode and charging current on page 2 & 3. Tester will stop charging if one of the conditions below was met. 1) Remaining capacity 99% & current intensity = 0 2) Remaining capacity = full charge capacity 3) Current intensity reduce to end charge current when constant voltage charge 4) Remaining capacity reach up the set value Discharge Constant current discharge for double loads Inner load: 0 ~ 1000mA, adjustable continuously via Battery Manager External load: 0mA, 500mA, 1000mA, 1500mA, 2000mA, five gears with dip switches offered Tester will stop discharging if one of the conditions below is met. 1) Remaining capacity set value 2) Voltage set value 3) Current intensity reduce to zero Remarks: Many batteries can not measure exact current intensity, which cause an else current value appears after you set a value. However, the actual discharging current is the same with your set value. Test Testing time is 12 seconds and the purpose is to check both the charging and discharging performances. After finishing test, LED flickers with green color and LCD reports the test result. Normal: Test OK Shown on LCD Abnormal: Test NG Shown on LCD Possible causes and solutions for the abnormal: 1) Cause: battery voltage is too low to discharge Solution: try to charge the battery to raise voltage 2) Cause: remaining capacity is too full to charge any more Solution: try to discharge the battery to reduce the remaining capacity 3) Bad contact of battery connecting wires 4) Damaged battery 5) Tester trouble Capacity Correction The battery capacity value in the battery management chip will different from the actual capacity after a battery goes through many recycling cycles. It will affect the use of the battery when the difference reaches a certain degree. Capacity correction is to deep discharge a battery and then fully charge, which will correct the capacity value in the battery management chip. Remarks: Discharging current can be set via Battery Manager. Deep discharge will cause a battery losing communication with tester, so battery dropping phenomenon may happen in the discharging process if the end capacity and voltage are set too low. In such a case, active charge will make the battery work again. 50% Capacity CD50%: charge firstly, and then discharge to 50% capacity DC50%: discharge firstly, and then charge to 50% capacity Online Functions Tester can be connected with master machine via a USB port. Users can monitor, control and set parameters via Battery Manager software in the master machine. Monitoring Battery information can be monitored via three windows. 1. Home screen Battery bar and brief information can be read on home screen. 2. Battery detail information window Show smart battery data in real time and the data can be saved and printed in image format. 3. Battery graph window Voltage, current and capacity are traced in curves. Control Battery Manager can control slave machine completely. Right-click menu on the battery bar includes the related commands. Attention All the functions of charge, discharge, capacity correction and 50% capacity are comply with the charging discharging conditions, which are showed on function introduction paragraph in page 4 & 5, so parameters should be set reasonably. Especially, deep discharge will cause a battery losing communication with tester. Others 1. Active cooling 2. Active batteries of zero voltage When a battery is deep discharged, the discharge protection circuit will start up and the voltage in the battery connector will become zero voltage. In this case, an appropriate voltage should be supplied to active the battery. 3. Battery identification Battery information can be read from battery management chip after establishing communication. 4. Intelligent protection Against over-current, over-voltage, over-charge, over-heat and short circuit. 5. Fan Discharging mode: fan startup Other modes: fan startup when temperature above 48 Fan stop working when temperature below 40 6. Trouble alarm LED flickers in red color and current command stops when one of the conditions below happen. 1). There is not current for around 50 seconds when charge. 2). There is not current for around 25 seconds when discharge. 3). Charging time is above 8.8 hours. 4). Discharging time is above 9.9 hours. 5). Suitable for almost all laptop batteries, above 95% Structure Accessories 1).1 * adapter 2). 1 * USB cord 3). 1 * CD 4). 13 * connectors 5). 10 * cables 6). 10 * jumpers 7). 1 * loader Standard Export Carton