Basalt Geo Grid

Basalt Chopped Fibers â?? Features & Benefits High tensile strength Resistant to alkali in concrete and require no special coatings Resist cold down to -260°F and heat up to 1,500°F Do not conduct electricity or induce electrical fields Do not absorb or wick water Will not harbor bacteria or microbial growth Has good fatigue resitance Basalt Chopped Fiber â?? Specifications Basalt Chopped Fiber Diameter: 13 microns to 20 microns Basalt Chopped Fiber Lengths: 3mm to 90mm Basalt Chopped Fiber with sizing (binder) for applications: portland cement and asphalt Basalt Chopped Fiber with sizing (binder) for resins: thermoplastic, epoxy, polyester, pva, & phenolic Basalt fibers unlike other fibers will not harbor bacteria or microbial growth. For example corrosion is caused in municipal sewers by aerobic bacteria. These convert into sulfuric acids which quickly dissolve concrete. Basalt fibers will not harbor these bacteria. Due to basaltâ??s low thermal conductivity, deposition of salts and paraffinâ??s inside the pipes is also reduced. Structural basalt composite components (such as pipes and rods) are made from unidirectional basalt reinforcement. In combination with its high specific strength (9.6 times as high as steel), high resistance to aggressive media, and high electrical insulting properties, this results in specialty products such as insulators for high voltage power lines. For asphalt applications, over one half inch less thickness can be laid down saving tons of asphalt while gaining a 30-50% better lifespan! Basalt composite pipes can transport corrosive liquids and gases. So, thinner panels with less cracking and the ability to maintain fine molded details without small areas chipping off or breaking.

Basalt Mesh is better than steel for many reasons Stronger than steel wire of comparable size By far lighter and easier to handle and install (no nasty cuts). Will not rust or corrode or cause cracking of concrete Flexible for easier design Basalt does not conduct electricity or induce electric fields Basalt Mesh binds well with both asphalt and concrete Many mesh sizes available: 5x5mm, 10x10mm, 25x25mm and 50x50mm coated or uncoated mesh available

Basalt Rebar Basalt rebar is a perfect material for civil and industrial construction with continuous spiral ribbing formed by means of winding by basalt strip oiled in highly durable polymeric compound. Basalt Rebar is an alternative to steel and fiberglass for reinforcing concrete. Basalt Rebar is demanded in the construction market, nevertheless, many people are not even aware of its existence. The material has many useful features which are essential for modern construction, due to which it is in serious competition even with metal. A basalt rebar consists of numerous basalt filaments, which being bound to each other, create a durable and a strong bond, thereby forming an excellent material for construction. Despite the fact, that for a long time, the rebars for the construction, have been made entirely of metal, recently the situation has dramatically changed, as basalt has also become a prospective one, which means that its quality and features will be improved with time.

Basalt roving is used in different industries. Itâ??s used for production of the following products: Rebar for concrete reinforcement Profiles and pipes High-pressure vessels Geogrids Various types of fabrics Basic technologies of basalt roving processing are the following Pultrusion, Filament winding, Weaving, Multiaxial fabrics production. Direct roving is a ready â?? to â?? sell continuous one-end strand produced in the drawing process and wound on bobbins with 200 mm internal diameter.The main advantage of direct roving is zero catenary and excellent appearance. That is the reason why direct roving is used for production of fabrics and geogrids, as well for production of pultruded profiles and rebar. For other applications customers may need roving with much higher tex, comparing to direct roving, such as 2400 or 4800 tex. Some customers canâ??t use direct roving, because they need roving wound on bobbins with external unwinding. These products can be produced in form of assembled roving. Egular assembled roving consists of several single-end strands joined together without twisting on special assembling machine. It is supplied on bobbins with internal unwinding (tubeless, 76 mm internal diameter) or external unwinding (bobbins are wound on a tube with internal diameter of 76 mm and length of 270 mm).

Supplier: Basalt rebar, basalt chopped fiber, basalt roving, basalt mesh, basalt geo grid

You Chang brand geogrids are composed of fiberglass or polyester yarn coated with Bitmen,PVC,SBR.These products possess the properties of high tensile strength in the warp and weft directions,low elongation,excellent temperature range,and good anti-aging and alkali-resistance. Compared to traditional use of fiberglass geogrids can reduce construction costs,extend road service life,and prevent deflection cracks.They can also be used to reinforce roadbeds in soft soil for railways,and water dams. Geogrids woven by Dornier Weaving machines,coated with PVC. Application 1. Roadbed reinforcement of road and railway,crack prevention,increase of roadbed strengthinsulation,roof waterproof,wall corner. 2. Reinforcement and stabilization of riverside,embankment and side slope 3. Reinforcement roadbed in soft soil for railways and water dams. 4. Reinforcement of the surface of road and bridge.

Grade level to avoid trip hazard and snow plough damage. 5.Water resistant with service replaceable seal. 6.Fitted with stainless steel retaining bolts for prevention of unauthorised access. 7.Lightweight to reduce injury during opening and closure. 8.Non corroding - non sparking frame and cover materials. 9.Reduced noise under traffic movements. 10high quality black through finish or other color by request. 11.High security options available for use in prisons, embassies, airports and other areas at risk of terrorist activities. 12.Comprehensive manufacturer warranty. Place of origin: China Brand name: Qd Model no.: Mc1258

Basalt Fiber Series Fabric 1. Production: basalt fiber fabric is made of continuous basalt fiber textile yarn through warping, weaving and coating. 2. Weaving methods according to requirements: unidirectional cloth, plain cloth, twill cloth and grid cloth. 2. Application: reinforced mesh cloth, fireproof cloth, fishing rod cloth, luggage decoration cloth, electrical insulation cloth, bulletproof cloth, etc. 3. Packaging: 100M / roll (or customized as required). 4. Performance: high strength, high temperature resistance, good electrical insulation, non hygroscopic, acid and alkali corrosion resistance. 5. Specification and model: bfw16 * 20-100 (120) BFW: basalt fiber fabric; 16 * 20: the warp and weft density of yarn is 16 and 20 pieces / cm respectively; 100: the width of the fabric is 100 cm; (120): the mass per unit area of fabric is 120 g / m2. BFNP5*5-200(160) BFNP: basalt fiber mesh cloth (coated and shaped); 5 * 5: the longitude and latitude mesh size of the cloth surface is 5 and 5mm; 200: the width of the grid is 200 cm; (160): the weight of grid cloth per unit area is 160g / m2.