Provideed with two AC meter 5V and 25mA, one inductance, three resistances and three capacitors with separate terminals for measurement of ‘Q’ value.
Experimental Training Board has been designed specifically to study the behavior of the Reactive Elements and Time Dependent Network Analysis. Practical experience on this board carries great educative value for Science and Engineering Students. Object: 01. To study Charging & Discharging of a Condenser. 02. To Calibrate D.C. meter for A.C. voltage measurements. 03. To construct the vector (phasor) diagram for series L-R circuit and to calculate the power factor and "Q" at 50 Hz. 04. To study series LCR resonance circuit and its "Q". 05. To study series L-C resonance circuit and from it to find out the true value of "L". 06. To study series C-R circuit. 07. To study different types of filters. 08. To study the parallel R-C resonance circuit. 09. To study the parallel L-C resonance circuit and to find its "Q". 10. To verify circuit laws. 11. To find out the impedance and reactance of LCR reactive elements and to plot their reactance curves. 12. To plot "LISSAGOUS" figures. Features: The board consists of the following built-in parts: 01. Mains Transformer having secondary tappings of 10V, 20V, 30V, 40V, 50VA.C. at 500mA. 02. D.C. Voltmeter, 65mm rectangular dial with switch selectable ranges of 10V, 20V, 30V, 40V and 50V. 03. Four Rectifier diodes. 04. SPDT switch. 05. Potentiometer and adequate no. of other electronic components. 06. Mains ON/OFF switch, Fuse and Jewel light. * The unit is operative on 230V ±10% at 50Hz A.C. Mains. * Adequate no. of patch cords stackable from rear both ends 4mm spring loaded plug length ½ metre. * Good quality, reliable terminal/sockets are provided at appropriate places on panel for connections & observation of waveforms. * Strongly supported by detailed Operating Instructions, giving details of Object, Theory, Design procedures, Report Suggestions and Book References.
IC Crack MCU PIC series Timer0:8-bit timer/counter with 8-bit perscaler Timer1:16-bit timer/counter with prescaler, can be incremented during SLEEP via external crystal/clock Timer2:8-bit timer/counter with 8-bit period register,prescaler and postscaler Two Capture, Compare PWM modules -Capture is 16-bit,max. resolution is 12.5ns -Compare is 16-bit,max. resolution is 200ns -PWM max. resolution is 10-bit 8-bit, up to 8-channel Analog-to -Digital converter Synchronous Serial port (SSP) with SPT (Master mode) and I2C (Slave) Universal Synchronous Asynchronous Receiver Transmitter (USART/SCI) Parallel Slave Port (PSP), 8-bit wide with external RD, WR and CS controls (40/44-pin only) Brown-out detection circuitry for Brown-out Reset (BOR).
Mirror products series as follow: Tinted float silver mirror(color mirror) Thickness:4mm-6mm Available Size:3660*2134mm,3300*2134,3050*2134mm,1830*2440mm,1650*2140mm,1650*2200mm Color :bronze, euro grey, dark blue ,pink etc Clear float cooper free silver mirror Thickness:3mm-6mm Avaliable size:3660*2134mm,3300*2134mm,30502134mm,1830*2440mm,1650*2140mm, 1650* 2200mm Packing:paper interleaf, end cap or wooden crates packing Extra clear float silver mirror Thickness:3mm-8mm Avaliable size:3660*2134mm,3300*2134mm,30502134mm,1830*2440mm,1650*2140mm, 1650*2200mm and so on Packing:paper interleaf, end cap or wooden crates packing Silver Mirror is producted by coating a silver film, a cooper film and two layers of waterproof painting on the back of flat and parallel float glass Clear float silver mirror Thickness:3mm-8mm Available size:3660*2134mm,3300*2134mm,3050*2134mm,1830*2440,1650*2140mm, 1650*2200mm and so on Packing: paper interleaf, end cap or wooden crates packing ;double coated with italy FENZI paint Aluminium mirror Aluminum mirror is producted through vacuum coating, I.E.let the melt aluminum splash on the clear float glass surface in the vacuum chamber, and then coated with twive painted.Quality mirrors are coated with double paint Clear sheet aluminium mirror Thickness:1.2mm-2.7mm Available size:600*900mm,914*1220mm,700*1000mm
QDS SERIES BIN WASHING STATION DOUBLE CHAMBER APPLICATION: THIS EQUIPMENT IS MAINLY USED IN SOLID PREPARATION PROCESS FOR VESSEL AUTOMATIC WASHING AND DRYING. IT CAN SATISFY DIFFERENT SPECIFICATION PHARMA BINS OR IBC WASHING AND DRYING REQUIREMENTS. CONSIDERED AS IDEAL EQUIPMENT FOR VESSEL AUTOMATIC WASHING AND DRYING ON A LARGE SCALE, IT IS WIDELY USED IN PHARMACEUTICAL EQUIPMENT, CHEMICAL AND FOODSTUFF INDUSTRIES. 1.PARALLEL WASHING AND DRYING PROCESS AT THE SAME TIME 2.HIGH AUTOMATION 3.CONTINOUS WORKING 4.AUTOMATIC IDENTIFICATION SYSTEM (AIS) AVAILABLE 5.SUIT FOR MULTI-SPECIFICATION BIN WASHING. 6.SAFETY AND INTERLOCK SYSTEM 7.SELF CHAMBER CLEANING 8.RECYCLE WASHING SYSTEM
PFA series parallel reaction bottle is an efficient and multifunctional chemical reaction device. Its core advantage lies in the use of PFA (soluble polytetrafluoroethylene) material. PFA has excellent high and low temperature resistance and a wide range of operating temperatures. It can maintain stability in extreme environments and ensure a safe and controllable reaction process. In addition, PFA has extremely high chemical stability and can tolerate almost all chemical solvents, effectively preventing cross-contamination and ensuring the purity of reaction results. Its dielectric properties are excellent, and its electrical insulation is not affected by temperature, providing a stable electrical environment for experiments. In terms of structural design, the PFA series parallel reaction tanks are connected in series and parallel, which can flexibly adjust the reaction process and improve reaction efficiency. At the same time, its transparent and colorless appearance makes the reaction process clear at a glance, making it easy to observe and monitor. In summary, the PFA series parallel reaction tank provides strong support for laboratory research with its excellent PFA characteristics and efficient design, and the entire device supports customization.
Versatile instrument to verity ohms law as well as law of resistance in series & parallel, consists of two meter, five transparent resistance coils and a step down transformer giving 1.5, 3, 4.5 volts, housed in metal case & provided with on/off witch, LED indicator and lead wire
The slide wire 50 cm long is fitted over graduated plate divided in 500 part. The jockey is of superior type and slides on the metal rod. The dial consists of 14 coils connected in series to the slide wire. Terminals for battery, galvanometer and test circuit are provided on the panel.
Technical Parameters Product name: PFA reagent bottle Specifications (ml): 30/60/100/250/500/1000/2000/3000/4000/5000 Material: PFA Withstand temperature: -196-260â?? Product Features 1. Translucent appearance; 2. Temperature resistance: operating temperature -200~+260â??; 3. Insulation resistance: dielectric properties have nothing to do with temperature and frequency; 4. Anti-pollution: low metal element value; 5. It has low dissolution and precipitation characteristics and is a container for storing standard substances and different reagents; use: 1. Suitable for storing and packaging different chemical reagents and standard samples; 2. Applicable to semiconductor, polysilicon, photovoltaic electronic lithium battery industries; sampling of high-purity water, electronic pure reagents, photoresist, silicon wafer washing liquid, electronic grade cleaning agent, liquid crystal liquid, circuit board washing liquid, etc.; also suitable for new materials and new Storage and use of energy such as silicon materials; 3. Can be used with Agilent, Shimadzu, PE, Thermo Fisher and other brands of ICP-MS, ICP-OES and other instruments for trace analysis and isotope analysis. Our PFA series products: Sample storage bottles, washing bottles, volumetric flasks, measuring cups, beakers, digestion tubes, sample dissolving tanks, micro columns, crucibles, valves, joints, delivery pipes and other products