KDS Cast Iron Submersible Slurry Pump Contractor Pump APPLICATION: Civil engineering, Mines, Quarries, Coal ore & Slurry Sewage treatment Usage General Pumping Pumping fluid: sludge, liquids-containing mud and bentonite SPECIFICATION: Motor&Pump body: Rigid Cast Iron Hose Coupling:...
NSQ submersible sludge pump is hydraulic machinery, the motor and the pump of which are coaxially submerged in medium to work. The overflowing parts of the pump are made from high alloy wear-resistant material, so the pump has good wear resistance and large flowing passage. It is applicable for conveying media such as sludge, ore slurry, coal slurry, sandstones containing big solid particles. The product is designed and manufactured by domestic and oversea advanced technologies. Besides the main impeller, the bottom of the pump is additionally provided with a set of agitation impeller which can spray the deposited sludge into turbulent flow, and therefore the pump realizes high-concentration conveying under the condition of no auxiliary device. The unique seal device can effectively balance the pressure inside and outside the oil chamber, so as to protect the reliability of the mechanical seal to the maximum extent. The motor adopts various protective measures such as overheat protection, water inle t detecting protection, and can operate safely for a long term in harsh working conditions. The pump is applicable for pumping sand for building, silty sand, silt, tailing slurry, ore, iron sand ore, sediment in sewage treatment works, etc. Structural Property 1.The whole machine is dry submersible pump, and the motor adopts oil chamber seal mode and is provided with mechanical seal inside, so that high pressure water and impurities are effectively prevented from entering inner cavity of the motor. 2.Besides the main impeller, there is the agitation impeller which can agitate the sludge deposited on the water bottom into turbulent flow and pump the sludge out. 3.The trans-flux parts such as the impeller and the agitation impeller are made from high-hardness high chromium cast steel, have wear resistance, corrosion resistance and strong drainage capacity, and allow big solid particles to pass. 4.The motor is submerged in water, is not limited by suction stroke, and has high sludge suction rate and thorough desilting. 5.The integral device is simplified, needs no auxiliary stirrer device or ejector device, and has simple and convenient operation and low total investment of the unit. 6.The agitation impeller directly approaches the depositional surface, and controls the concentration through submerged depth. Under the condition of large medium proportion, an auxiliary device can be arranged to increase the concentration of the medium. Use Conditions 1 The power source is 50Hz/380V three-phase alternating-current supply, and the capacity of the substation transformator is two to three times of the rated capacity of the motor. 2 The temperature of the medium cannot exceed 60íµ, and the medium does not contain inflammable or explosive gases. 3 The maximum weight concentration of the solid particles in the medium: the maximum weight concentration of the ash is 45% and the maximum weight concentration of the slag is 60%. 4 The submerged depth of the unit is not more than 20 meters, and the minimum submerged depth takes submerging of the motor as reference. 5 The unit works in the medium vertically, and the working status is continuous. Weight is 210KG.
Place of Origin:China Usage:Water Power:Electric Standard or Nonstandard:Standard Fuel:Electric Flow:24-4500m3/h Head:11-60mOutlet diameter range:50-450mm Packaging Details:Seaworthy wooden cases Delivery Detail:within 2 month
Hydroman Electric Submersible Slurry Pump in Stainless Steel for Acid Mine also known as stainless steel submersible slurry pump are designed to provide the mining and industrial processing markets with unparalleled resistance to corrosion and abrasion, polluted water in the sea or the rivers also requires these stainless steel submersible pumps. Hydroman submersible stainless steel slurry pump is an extremely durable, top-discharge slurry submersible pump with a mechanical agitator and wide clearances. This submersible slurry pump uses the pumped liquid to cool the motor. The pumping components of the submersible sea water sand pump, notably the agitator, impeller and wear plate are constructed of stainless steel, meaning the submersible sand slurry pump is designed to be a solid workhorse in any condition. Hydroman Electric Submersible Slurry Pump in Stainless Steel for Acid Mine Features Best structure design of submersible sand pump, has a dry motor, IP68, double mechanical seals, equipped with an auto-cut protection, pump casting, outer cover is stainless steel, and acid-resistant silicon carbide seals. The stainless series submersible agitator slurry pump is suitable for all light acid, corrosive and/or sea water application fluid in pH values between 4 to 10pH. For strong acidity and alkalinity applications, please use the specified chemical vertical submerged pump. Investment Casting Precision casting with the use of an advanced stainless investment casting method that produces the highest quality with a smooth surface finish. Viton O-rings are used throughout the stainless steel submersible slurry agitator pump to give better pump life in corrosive acid and aggressive media. Austenitic Stainless Steel SS316 water application of light acid-base.
Hydroman Hydraulic Submersible Slurry Pump is protected by a mechanical seal, which can effectively prevent high-pressure water and impurities. In addition to the main impeller, there is also an agitating impeller for the submersible slurry pump, which can agitate the slag deposited on the bottom of the water. Plus, the mixing impeller and other main flow parts are made of advanced materials, which are wear-resistant, corrosion-resistant, non-clogging, strong in sewage, and can effectively pass larger solid particles.The slag suction efficiency is high, and the dredging is more thorough. The motor of submersible slurry pumps dives into the water, without the need to construct complex ground protection and fixing devices, and the management is easier, thus to ensure high and reliable performance.
OGEM YZ Submersible slurry pump is centrifugal pump. It is usually used to pump drilling fluid with larger particle. So it can be treated as shale shaker feeding pump. It is vertical type save much space. Furthermore, it also can be decanter centrifuge feeding pump. YZ Submersible slurry pump impeller is semi opening type this provides high efficiency. The impeller material is carbide alloy make pump more durable decrease maintenance cost. OGEM Equipment is professional manufacturer on submersible slurry pump with high quality and economical cost. Benefits 1.Request less space 2.High efficient and effect 3.Durable enough 4.Low maintenance cost 5.Better for transferring drilling fluid
KDZ Cast Iron Submersible Slurry Pump Contractor Pump APPLICATION: Civil engineering, Mines, Quarries, Coal ore & Slurry Sewage treatment Usage General Pumping SPECIFICATION: Motor&Pump body: Rigid Cast Iron Hose Coupling: Rubber & Steel Upper Cover: Cast Iron Mechanical Seal:...
Submersible Slurry Pump The electric submersible slurry pump is a kind of vertical centrifugal pump, generally immersed in the pool or pit work, the flow parts and shaft have strong wear resistance, suitable for conveying abrasive slurry, such as drilling mud, heavy oil, sewage, mortar, flowing sand, flowing sludge and other fluids containing mud and sand, widely used in petroleum, mining, metallurgy, water conservancy, construction, chemical industry and so on. The BZ submersible slurry pump china is mainly used to feed slurry from the mud pool to shale shaker in the mud system. BZYZ Submersible Slurry Pump Features No bearing and shaft seal between propeller and pump body, maintenance-free, high temperature resistant. Cast alloy iron material, long service life. Adopt famous brand explosion-proof motor and bearings. BZYZ Submersible Slurry Pump Specifications Model Capacity Lift Motor Speed Outlet EX Standard Weight Dimension L*W*H BZYZ30-040 30m�³/h (110gpm) 10m 4kW 1450RPM (50Hz) DN50 ExdIlBt4 / IECEX / ATEX 370kg 2620x500x720mm BZYZ40-055 40m�³/h (147gpm) 10m 5.5kW 1750RPM (60Hz) DN50 600kg 2700x500x700mm BZYZ60-075 60m�³/h (220gpm) 18m 7.5kW DN80 610kg 2650x500x700mm BZYZ80-110 80m�³/h (293gpm) 20m 11kW DN80 715kg 2750x580x730mm BZYZ110-185 110m�³/h (403gpm) 24m 18.5kW DN100 840kg 2900x600x900mm BZYZ120-220 120m�³/h (440gpm) 28m 22kW DN100 880kg 2950x600x900mm BZYZ165-300 165m�³/h (605gpm) 26m 30kW DN100 1300kg 3100x750x900mm BZYZ240-370 240m�³/h (880gpm) 24m 37kW DN150 1420kg 3160x700x1130mm BZYZ270-450 270m�³/h (990gpm) 30m 45kW DN150 1510kg 3190x700x1130mm As one of submersible slurry pump manufacturers, we can provide kinds of submersible slurry pump for sale, if you have needs, please contact us. BZ is one of professional solid control companies, providing professional solutions for oil and gas drilling, waste treatment, environmental and municipal construction, etc. BZ main products include vertical and horizontal centrifuges, shale shaker and turnkey system. Our in-house experts who possess a deep understanding of fluid and solid separation, enable us to efficiently solve real-world problems for our customers. Our goal is to solve customer problems in an appropriate way, reducing operating costs while taking into account environmental and social responsibility.
Hydroman Stainless Steel Submersible Slurry Pump Description: Hydroman Stainless Steel Submersible Slurry Pumps are designed to provide the mining and industrial processing markets with unparalleled resistance to corrosion and abrasion, polluted water in the sea or the rivers also requires these stainless steel submersible pumps. Hydroman�® submersible stainless steel slurry pump is an extremely durable, top-discharge slurry submersible pump with a mechanical agitator and wide clearances. This submersible slurry pump uses the pumped liquid to cool the motor. The pumping components of the submersible sea water sand pump, notably the agitator, impeller and wear plate are constructed of stainless steel , meaning the submersible sand slurry pump is designed to be a solid workhorse in any condition.
Hydroman TJQ Submersible Slurry Pumps are heavy duty agitator submersible slurry pumps, dredge Pumps, sand Pumps, and sludge Pumps working in the underwater industry, capable of handling slurry, sand, gravel, solids and all kinds of sludge in diverse applications related to the dredging, construction, oil and mining industry as well as marine, energy, and industrial sectors. Submersible Slurry Pumps deliver massive solids production at very low operational costs. Hydroman offers the deepest submersible, largest capacity, high head, long distance, heavy duty slurry pumps available on the market.
