FDR-0401 Distillate fuel oil oxidation stability tester
Scope
Distillate fuel oil oxidation stability tester side given instrument (accelerated method) according to SH / T0175-94, ASTMD2274 and other standards to determine the initial boiling point of not lower than 175 , 90% point distillation temperature no higher than 370 of middle distillate fuels inherent stability and performance of the oil. I.e., in the case of an active metal surface and the water or dirt and other environmental factors do not exist, the sample is exposed to the atmosphere in the ability of anti-change.
Features
1, the fixed value regulator valve to provide a constant flow of oxygen test.
2, thermostatic bath, large capacity, good insulation properties, and can make six samples tested.
3, oxidation tube with radial clamping, easy operation and reliable.
4, the camera obscura after the oxidation test tube directly into which were cooled at room temperature
5, sample oxidation time automatic control, when the alarm system.
6, the instrument uses metal bath, heating speed, good stability, environmental protection
Technical Parameters
1, oxidation flowmeter: Six oxidation test flow meter can be adjusted individually, the test flow rate: 50 ± 5ml / min.
2, constant temperature bath: the use of FLD metal bath.
3, the thermometer: in line with GB / T514-83 standard, WLH-33C, 50-100 , 0.5 indexing rod
4. Temperature control mode: automatic heating, automatic temperature control
5, temperature accuracy: 95 ± 0.2
6, oxidation tube: borosilicate glass, in line with SH / T0175-94 standard
7, electric heaters: when the main heater 220V 2500W, auxiliary heating 800W.
8, the regulator valve oxidation: oxidation is the oxidation stability, in front of the flow meter with regulator valve
Scope Distillate fuel oil oxidation stability tester side given instrument (accelerated method) according to sh / t0175-94, astmd2274 and other standards to determine the initial boiling point of not lower than 175 ?, 90% point distillation temperature no higher than 370 ? of middle distillate fuels inherent stability and performance of the oil. I.E., in the case of an active metal surface and the water or dirt and other environmental factors do not exist, the sample is exposed to the atmosphere in the ability of anti-change. Features 1, the fixed value regulator valve to provide a constant flow of oxygen test. 2, thermostatic bath, large capacity, good insulation properties, and can make six samples tested. 3, oxidation tube with radial clamping, easy operation and reliable. 4, the camera obscura after the oxidation test tube directly into which were cooled at room temperature 5, sample oxidation time automatic control, when the alarm system. 6, the instrument uses metal bath, heating speed, good stability, environmental protection Technical parameters 1, oxidation flowmeter: six oxidation test flow meter can be adjusted individually, the test flow rate: 50 ± 5ml / min. 2, constant temperature bath: the use of fld metal bath. 3, the thermometer: in line with gb / t514-83 standard, wlh-33c, 50-100 ?, 0.5 ? indexing rod 4. Temperature control mode: automatic heating, automatic temperature control 5, temperature accuracy: 95 ± 0.2 ? 6, oxidation tube: borosilicate glass, in line with sh / t0175-94 standard 7, electric heaters: when the main heater 220v 2500w, auxiliary heating 800w. 8, the regulator valve oxidation: oxidation is the oxidation stability, in front of the flow meter with regulator valve
Scope Distillate fuel oil oxidation stability tester side given instrument (accelerated method) according to sh / t0175-94, astmd2274 and other standards to determine the initial boiling point of not lower than 175 ?, 90% point distillation temperature no higher than 370 ? of middle distillate fuels inherent stability and performance of the oil. I.E., in the case of an active metal surface and the water or dirt and other environmental factors do not exist, the sample is exposed to the atmosphere in the ability of anti-change. Features 1, the fixed value regulator valve to provide a constant flow of oxygen test. 2, thermostatic bath, large capacity, good insulation properties, and can make six samples tested. 3, oxidation tube with radial clamping, easy operation and reliable. 4, the camera obscura after the oxidation test tube directly into which were cooled at room temperature 5, sample oxidation time automatic control, when the alarm system. 6, the instrument uses metal bath, heating speed, good stability, environmental protection Technical parameters 1, oxidation flowmeter: six oxidation test flow meter can be adjusted individually, the test flow rate: 50 ± 5ml / min. 2, constant temperature bath: the use of fld metal bath. 3, the thermometer: in line with gb / t514-83 standard, wlh-33c, 50-100 ?, 0.5 ? indexing rod 4. Temperature control mode: automatic heating, automatic temperature control 5, temperature accuracy: 95 ± 0.2 ? 6, oxidation tube: borosilicate glass, in line with sh / t0175-94 standard 7, electric heaters: when the main heater 220v 2500w, auxiliary heating 800w. 8, the regulator valve oxidation: oxidation is the oxidation stability, in front of the flow meter with regulator valve
Supplier: Bonny light crude oil (blco), yemen light crude oil, jet fuel, diesel d2, d6, mazut, base oil, gasoline, cocoa bean and powder, petroleum products, coal, diesel, bitumen, petcoke, aluminum, hms, charcoal, wheat, sugar, milk, soybean, corn, beef, chicken, flour, meal, rye, frozen vegetable, okra, french fries, etc.
Services: Procurement, exporter
Supplier: En590 10 , d6 , naphtha , jetfuel, nigerian crude, petcoke, and iron ore ( mexico origin )
Buyer: Used/second hand equipment, machinery, plants, granular sulphur
Supplier: Crude oil, cement, charcoal, flour, palm kernel oil, palm kernel seed, river sand, white beans, bitumen, turkey, parboiled rice, used car, motor oil, diesel
Supplier: , isabgol (psyllium husk) sugar free (stevia powder sachets), castor oil (bulk & packing),
perfumes (bulk orders),
n95 mask, surgical, chemicals, farsan, fruits & vegetables : seasonal
Services: Manufacturing, exporting & trading
Supplier: Fresh vegetables, fresh products: orange, potatoes, yellow onion, red onion, fresh garlic, dry garlic, dry white beans, pomegranate,
intermediation for diesel en590, jp54 aviation jet fuel a1, d6 diesel oil , d2 diesel oil, lpg, lng, automotive gas oil (ago)
intermediation for sugar icumsa 45, yellow corn, wheat
Services: Intermediation for diesel en590, jp54 aviation jet fuel a1, d6 diesel oil , d2 diesel oil, lpg, lng, automotive gas oil (ago)
intermediation for sugar icumsa 45, yellow corn, wheat
Buyer: Sugar icumsa 45, diesel en590, jp54 aviation jet fuel a1, d6 diesel oil , d2 diesel oil
Supplier: Sugar icumsa 45, sunflower oil, peanut oil, palm oil, organic cashew nuts, cocoa and madagascar vanilla, jet a1 and diesel en 590 10 ppm
Buyer: Sunflower oil, peanut oil, palm oil, organic, cocoa and jet a1 and diesel 590 10 ppm
Supplier: Oil & gas products, en590 diesel, jet fuel a1, d6 virgin fuel, petcoke etc, petroleum products, metal commodities like copper cathode & aluminium ingots
Services: Brokering services
Buyer: Oil & gas products on behalf of my clients, en590, jet fuel, d6 virgin fuel etc.