Description
Rigid Wall Shelters
Shelter classification
1. High structural strength, made from heavy-duty insulation aluminum panel and extrusion, can be used as a independent unit.
2. Small size, light weight, easy to hide, configured with plug and play power outlets,internet access, air conditioners. working conditions are comfortable.
3. Easy to disassemble and installed. It can be deployed by hand tools within 10 minutes and suitable for various transportation modes and has good strategic mobility
4. High generalization, serialization, and standardization
5. Main materials: carbon fiber, glass fiber, aramid honeycomb and aluminum honeycomb, shielding material, etc.
6. High load to weight ratio and suitable for mini systems with high mobility.
7. Other functions such as automatic balance system, automatic shelter lifting system, internal control system, etc can be integrated according to c ustomer requirements to meet various customer needs.
8. Mode: single-side expansion, double-side expansion, multiple expansion.
9. Expanding way: withdrawal, overturn.
10. Transmission: by power, by hand, by fluid.
Application
1. By withdrawal or overturn, you can combine more shelters to get more space and function.
2. The smart designed connecting parts fixed on the wall can help you to combine the shelters easily, even you can get a house with courtyard as you wish.
3. Applicable to: field command post, hospital, temporary hangar, VIP lounge, etc.
4. A mini shelter tailored for customer with special purpose is usually mounted on small four-wheel vehicles.
5. It is suitable for temporary command center of a small unit , mobile communication and detection nodes, etc.
Electromagnetic shielding
1. High shielding effectiveness body: within the frequency range of 0.01 ~ 18000MHz, the shielding effectiveness is not less than 60dB.
2. In the 0.01 ~ 18000MHz frequency range, the shielding efficiency can reach up to 80dB or more.
Load ability
1. The plate can bear the 1KN ~10KN load as point load, concentrated load and uniform load.
2. Reinforcement for the inside equipments is available depend on buyers desire.
3. Crane lifting or helicopter hoisting is available.
Bullet proof and explosion proof
1. With internal protection and external protection, draping protection and other ways for protection.
2. Bullet-proof treatment of key parts such as cab, chassis oil / gas road, windows, member positions and so on.
3. It is suitable for mobile command post, important electronic equipment carrier, mine lifesaving and other fields.
Sealing property
1. Airtight: Up to 300Pa over pressure, the air leakage will be 0.1 ~ 6 m3/min inside the shelter.
2. Light: anti direct light leak out of the shelter.
3. Insulation performance: when the temperature gap between inside and outside up to 55 �C, the heat transfer coefficient is 1.2 to 2.5 W/(m2 �C)
4. Water seal endure the 6mm/min rain last 1 hour time.
Description of SBG800 HDPE/PP Double Wall Corrugated Pipe Extrusion Line: Features of pipe: Diameter scope: (ID) 500mm-800mm Double wall corrugated pipe line: In order to meet the demand of plastic market, HUASU Company designed and developed this HDPE Double Wall Corrugated Pipe Extrusion Line SBG800 by absorbing advanced technology from foreign countries plastic machinery industry. This HDPE Double Wall Corrugated Pipe Extrusion Line is the latest study achievement in the plastic extruding area. The whole extrusion line is suitable for the high speed extrusion of HDPE, LDPE, and PP material. The complete line adopts directly extrusion (two extruders co-extruding) and forming technology, human-machine interface control system. It makes high automation degree, reliable quality and stable production become true. And this pipe production line wins our home and abroad customers good reputation.
Description of SBG500 HDPE/PP Double Wall Corrugated Pipe Extrusion Line: Diameter scope: (ID) 200mm-500mm Double wall corrugated pipe line Features: The corruated pipe production line is developed with the ninety times advanced technology of West Europe by our company. The machine is equipped with double tube single-control stainless steel spraying shaper to form a production line. It avoids a waste condition when one tube is adjusted and the other one is affected. The auto single-control double haul off and cutter are combined with the front shaping technology to make operation more flexible. Let you enjoy economic benefit which is brought about by separately control double-tube extruding. It can make fully use of the extruding capacity of the extruder. Even if it produces small diameter pipe,it can get great output,too.
Description of PE Gas/Water Supply Pipe Extrusion Line: Diameter Scope: 20mm-1200mm We designs and develops HDPE/MDPE gas and water supply pipe production line by ourselves. This pipe production line has many features, such as: special structure, high degree automation, easy operation, continuous produce stable and reliably and so on. It is also applicable for high speed extrusion of PE,PP,PPR,PERT,ABS etc. The outstanding characteristics of this production line is that it can not only produce the pure PE pipe complying with the international standard, but also produce the wire reinforcing composite plastic pipe. Plastic Pipes produced by this line have excellent stiffness, flexibility, high mechanical strength, resistance of environmental stress cracks, resistance to creep deformation, heat-linkage and so on. It has become the first choice for the city gas pipe and outdoor water pipe. The whole production line, from charging to stacking shall be controlled automatically by PLC, having high reliability, easy operation and maintenance. With this extrusion line, a layer or multi-layer high strength wire such as steel wire, glass fibre and polyester fibre may be winded do existing pure PE pipe to increase the pipe working pressure to 4MPA. HDPE/MDPE pipe extrusion line mainly includes single screw extruder, molds, vacuum calibrating water tank, spray water cooling tank, haul-off machine, cutting machine and overturning bracket.
Description of SBG1000 UPVC Double Wall Corrugated Pipe Production Line: Diameter scope: (OD) 500mm-1000mm Double wall corrugated pipe production line Features: In order to meet the demand of plastic market, HUASU Company designed and developed this UPVC Double Wall Corrugated Pipe Extrusion Line SBG1000 by absorbing advanced technology from foreign countries plastic machinery industry. This UPVC Double Wall Corrugated Pipe Extrusion Line is the latest study achievement in the plastic extruding area. The whole extrusion line is suitable for the high speed extrusion of UPVC material. The complete line adopts one conical twin-screw extruder directly extruding and forming technology, human-machine interface control system. It makes high automation degree, reliable quality and stable production become true. And this pipe production line wins our home and abroad customers good reputation. There are two type of corrugation forming unit, vertical (forming mould block up-down open& close) and horizontal (forming mould block left-right open& close), each of them has its own advantage and disadvantage. We analyze the two types completely and acquire the best proposal which type suitable to which pipe diameter. So we are the unique maker who masters the two produce technologies in China. Latest and most reliable double wall faucet solution. We promote the chart and equipment, conquered general double wall faucet problem: low finish product rate, low line speed, require high quality raw material. Our line is of high finish product rate, high line speed, and requires common material. Efficiently increase customer market competing power.
Description of SBG500 UPVC Double Wall Corrugated Pipe Extrusion Line: Diameter scope: (OD) 160mm-500mm Double wall corrugated pipe line Features: UPVC Double Wall Corrugated Pipe Extrusion Line SBG500 developed by us absorb advanced technology from foreign countries plastic machinery industry. This UPVC Double Wall Corrugated Pipe Extrusion Line is the latest study achievement in the plastic extruding area. The whole extrusion line is suitable for the high speed extrusion of UPVC material. The complete line is adopted human-machine interface control system. It makes high automatical degree, stable production and great output become true. We adopt one efficiency conical twin screw extruder with high extrusion capacity in this line. There are special designed co-extrusion moulds made by alloy steel for making huge diameter UPVC corrugated pipe. Double spiral design with excelent quality alloy steel of the moulds can meet all of the production requirements. This plastic corrguated pipe machine is made of vibration sieve, high speed mixer machine and cooling machine, material feeder conical double screw plastic extruder,(single screw extruder) handpiece, double-wall accordion pipe shaper, plastic pipe-expanding machine, pilling bin, water chilling unit, air compressing machine. It can be used to produce PVC, PE plastic double-wall accordion pipe and plastic single-wall accordion pipes.
Description of PVC Water Pipe Extrusion Line: Qingdao HUASU Machinery Fabricate Co., Ltd designs and develops PVC pipe extrusion line especially for PVC water supply and disposal pipe. PVC water pipe extrusion line is specializing in manufacturing PVC,CPVC and UPVC pipes of different diameter and thickness. They are applied to agricultural and construction water supply and drainage, overhead or underground wire and cable. Due to the special characteristics of the CPVC plastic pipes, they are widely used in the fields of crude oil transportation, pipe lines of chemical industry which require high temperature and corrosion resistance, hot and lukewarm water supply and drainage system, directly buried pipes of high and extra high voltage electricity, protection sleeves of wires and cables, etc. High quality steel materials, strict producing process makes high quality line. This PVC pipe extrusion line mainly consists of conical twin screw extruder, PVC pipe molds, vacuum calibrating water tank, water spraying cooling tank, haul-off machine, cutting machine and overturning bracket.
Description of PPR Pipe Extrusion Line: Diameter Scope: 20mm-160mm PPR pipe introduction: We designs and develops PPR pipe production line and gas pipe production line by itself. Plastic Pipes that are produced by this line have excellent stiffness, energy-saving insulation and non-toxic, health performance so on. It has become the first choice for the hot/cold water pipe. Technical Introduction Firstly, put PP-R material and other assistant material into the mixer and mixing the material symmetrically, then feed into the hopper, at the same time heat extruder and keep the temperature, and the material is melt and plasticizing by extruder, then extruded by die and head and goes into vacuum calibrating device, and cooling and calibrating, then draw-off by haul-off machine, then printing word by ink jet printer, then put into automatic cuter to finish the automatic cut according to pre-establishing length and stacking into the shelf. And the eligible product is packed and put into storeroom, and inferior product is crushed and recycled. This pipe extrusion line mainly includes single screw extruder, molds, vacuum calibrating water tank, spray water cooling tank, haul-off machine, cutting machine (or winder) and overturning bracket.
Description of HDPE Huge Diameter Hollowness Wall Spiral Pipe Production Line: Hollowness Wall Spiral Pipe made by this production line has high ring stiffness and high brunt intensity due to its unique structure. It can be used for over 50 years and has many advantages such as light weight, easy operation, facile installation, withstanding pressure, corrosion resistant such as acid, alkali and salt etc. The pipe of large diameter hollow wall spiral pipe production line (from 150mm-3000mm in dia) is becoming replacement of cement pipe and cast iron pipe since it possesses many advantages such as easy operation and low cost of assembling, tight juncture between the pipes, no pollution and so on. The pipe of large diameter hollow wall spiral pipe production line is being widely used as sewerage and drainage pipe nowadays. This product has a good prospect in application and enjoys a potential market. This pipe extrusion line include extruder, die head, molds, spiral forming machine, forming molds, glue extruder, vacuum calibrating system, water spraying tank, cutting machine, overturning bracket and the whole line controlling system.
Description of PVC Fiber Enhancing Hose Extrusion Line Feature: PVC Fiber Enhancing Hose extrusion line ( PVC fiber reinforced pipe production line ) is a special complete set of equipment for producing PVC fiber enhancing hose. This pipe is non toxic, transparent, pressure endurable, anti-stretching, and acid resistance, corrosion resistance, good appearance, soft light, and durable. The middle layer of this PVC fiber hose is Terlene fiber network, which has good chemical and physical property. It is mainly used for the transportation of high pressure or corrosive gas, and it is widely used in food and health industry. Also it is good pipe for air, water, gas, oil and other liquid, gas in the temperature from -5 to 65. This PVC fiber reinforced pipe extrusion line consists of extruder, water-spraying tank, hauling-off unit, fiber-rolling unit, coiler, etc. It features reasonable configuration, unique structure, reliable performance, easy operation, convenient maintenance, high continual capacity, etc. It receives deep welcome and trust from clients.
