Proportional Relieve Valve

For Hydraulic Pressure Reducing/Relieving Proportional Valve equivalent to HydraForce TS10-36, AAK received official order from an old customer in the USA Last June, one of our old customers in USA placed a test order for a hydraulic Pressure Reducing/Relieving Proportional Valve equivalent to HydraForce TS10-36. It is a screw-in, cartridge style, pilot-operated, spool-type, proportional pressure reducing/relieving valve which can be infinitely adjusted across a prescribed range using a variable electric input. The regulated pressure is proportional to the input electrical current. In Ningbo China, there are other hydraulic cartridge valve manufacturers who have this model, and AAK price is not the most competitive one, but because the valves that they purchased from AAK in the past have very stable quality, they do not want to take risk to try other hydraulic cartridge valve manufacturers, especially this is a proportional valve, which is not easy, so they still placed the trial order with AAK. Till now, it has been 1 year since the trial order was shipped. Last week, AAK received the official order of 200 pcs qty from the customer. The advantages of AAK Hydraulic Pressure Reducing/Relieving Proportional Valve E-TS10-36 are: 1. The quality of this valve is benchmarking HydraForce, but price is much cheaper. 2. The service life is 2 times that of domestic hydraulic cartridge valve manufacturers in China Technical parameters of AAK E-TS10-36 Hydraulic Pressure Reducing/Relieving Proportional Valve: Max. Operating Pressure: 240 bar (3500 psi) Capacity: 56.8 lpm (15 gpm) Max.Control Current: 12 VDC coil - 1.10 A; 24 VDC coil - 0.55 A Relief Pressure Range (from zero to maximum control current): A: 6.9 - 207 bar (100 - 3000 psi) B: 6.9 - 159 bar (100 - 2300 psi) C: 6.9 - 117 bar (100 - 1700 psi) Cavity: VC10-3 AAK E-TS10-36 Hydraulic Pressure Reducing/Relieving Proportional Valve, benchmarking HydraForce TS10-36, its service life is 2 times that of its domestic peers. You are welcome to give it a try. AAK HYDRAULIC CARTRIDGE VALVES (805) 2024-07-15

Auto Proportion Valve PV4

Automatic Control Valve, Dual Setting Pressure Reducing Valve. Proportional Pressure Reducing Valve Work by Flow Rate (Model 132-090) controls pressure proportionally according as rate of flow. When rate of flow increase in pipeline, the valve operate higher pressure. When rate of flow decrease , the valve operate lower pressure. Therefore, Model 132-090 controls outlet-pressure proportionally according as rate of flow, even if the rate of flow change arbitrarily or slightly. Model 132-090 is optimized in waterworks, in state of smooth pressure change in pipeline. Also 132-090 have the function to prevent hunting itself.

servo proportional valve FRD.WJA5.021 Since its establishment in 2004, YOYIK has become an indispensable partner in heavy industries such as power plants and steel plants with its profound technical accumulation and industry experience. The company not only cultivates in the field of traditional power generation equipment accessories, but also actively expands technology and products in the field of new energy, demonstrating strong R&D strength and forward-looking market insights. By providing customized services and rapid response mechanisms, YOYIK has won wide recognition in domestic and foreign markets. We provide a wide variety of spare parts for power equipment, as listed below: #DF-servo proportional valve FRD.WJA5.021-DF Servo valve MOOG761-001 compact solenoid valve Z6206052 Impeller Nut CO46-09-27 centrifugal pump back pressure DFB125-80-300 servo valve PSSV-890-DF-0056A servo motor valve SM4-20(15)57-80/40-10-S182 pressure hose S100-AC-AC-0600 (G1/4) relief valve DBW10B-2-52/200-6EW230N9K4 r ddv servovalve S15FOFA4VBLN Hydraulic motor solenoid valve SV4-10V-0-6T-220AS high temperature solenoid valve PAT5002253 pressure relief valve YSF12-55/50-KJTH Seal/O-ring HB4-5861-2B variable piston hydraulic pump PVH074R01AB10A250000002001AE010A Fire resistant fuel recirculation pump F3 V10 1S6S 1C20 Accumulator inflation valve NXQ-100/90 Servo HY-SFF8.05 high pressure globe valves manufacturers WJ15F2.5P piston pump parts PVH098R01A250000002001AB010A Seals WJ01.37.106 Flat gate valve Z43H-200 n2 accumulator NXQA-2.5/31.5-L solenoid valve coil 22FDA-F5T-W220R-20/LB0 Pressure regulating valve DBDS15GIO/5/1 vacuum pump rear bearing M-209 pressure relief valve YSF8-55/25-TA lube oil accumulator 1.6L, PRESSURE: 20MPA Hydraulic accumulator nxq2-f40/31.5-H Butterfly valve oil engine sealing ring �?10*2 gear type oil pump GPA2-16-E-20-R6.3 sealing ring TRd8.687.546 Manhole O-ring HB4-56J8-171 AST solenoid valve seat 0508.919T0301.AW027 PRESSURE REDUCING VALVE DBDS10GM10/2.5 Needle valve NV-G1/4 Electromagnetic pump DFD-12-07-X servo proportional valve FRD.WJA5.021 servo proportional valve FRD.WJA5.021 MY-DFYL-2024-7-31

When using hydraulic valves with proportional drop function , The falling speed of the cylinder can be controlled by the stroke of the control handle .

7619066 WASHER, REG SPG LOCK 3/4 CD PL retaining block 2.3.04.003 Drill pipe clamp accessories ZQ203-100 Sliding sleeve 0106-05M 662010051 IMPELLER RETENTION BOLT 118844-22-22 Drill pipe tong accessories ZQ203-125 insert 19.100-01 111049-1 PIN, RETAINER (PAINTED YELLOW) Sleeve: Shot Pin For Tds Ps 11Sa 30151951 Lens F/Hyster Fork Lift 2027404 LW-0312-HS Hydraulic tank accessories F-1300 Double lip oil seal AH1301010406 REDUCING / RELIEVING VALVE 99353-1AN SEAL/GASKET, LINER 6.1/2 INCH - FOREIGN MADE--P/N:07923284 Power selection box accessories SNC40-17 console air circuit switch 56519-16-12-S ELBOW: 37�º O-RING BOSS E11236 Electromagnetic eddy current brake accessoriesZJ-45 control handle SK-1 Liner Stabilizer 30125012 INTERFACE ETHERNET 2 CHANNEL,MV3000 E15259 AY21504 Drill pipe tong accessories ZQ203-100 steel plate 0101-23AM Right bearing spacer p/n: P1103053AA Drill pipe clamp accessories ZQ203-125 Insert 19.100-01 Thermal Plotter ST820 Remote control system accessories YPD20/3 anti-backfire device TERMINAL ASSEMBLY 123294-3 30171518-1 SEAL, LINK TILT CYLINDER 56709-8-8-S ELBOW, STREET 45 VALVE CORE CONNECTING ROD FOR AIR PUMP FOR BOP CONTROL UNIT, BPM, P/N: 9163800027 Hydraulic tank accessories F-1600 cylinder head rod AH100101210100 LOWER IBOP ASSEMBLY 6205392/X 25XGZ-5K 6835322filter element 8152010 Electromagnetic eddy current brake accessoriesZJ-45 Electromagnetic brake fan GRT50 INBOARD LABYRINTH SEAL FOR DERRICK CENTRIFUGAL PUMPS â??P/N:G0006159 H19-1004-010 ZQ203-100 High pressure hose M30*1.5*10000 05-01M ND3128 Cooling Appliance*starter assembly PIN, OPERATING LEVER,ROTARY TABLE,ZP-375 ZP001.05 Hydraulic tank accessories F-1600 Wear disc removal tool 30182002-501 O-RING KIT, DEUBLIN Slotted nut M16 4.10.13.003 50006-7-C5D SCREW, CAP-HEX HD DRILLED PIN, ROLL, 0.19 X 0.63 LG, SST, 51603-05 FRICTION DISC W60-07-900 Drill pipe power tong accessories ZQ203-100/125 Cover 0104-12M Clutch Friction Disc Universal Dynamic Friction Disc 324WCB 508725 Hydraulic tank accessories F-1600 Oil supply oil pump YTX700 O-RING NOV, 51300-240-B Drill pipe clamp accessories ZQ203-100 Oil ring 0102-04M Petroleum Density Meter SY-1 0.81-0 Adapter 105mm 73mm 211 2 7/8"UPTBG male double positive VOLVOFM12 chassis*Steel plate center screw and cap INDUCTION MOTOR YBX3-160MI-2W FOR HH MUD PUMP BZ1000DBJ BLOWER MOTOR Power selection box accessories JR5232TSN air filter P200009984A Floating hoop FG ZX QZ 177.8mm TPCQ Buckle Cable : 3 Tsp X 1.0 Mm2 56627-03 190 series diesel engineFuel supply system * fuel injector assembly 12VB.16.00E Clutch assembly 115.35.00 99176+30 ISOLATOR,SAFETY,SINGLE-CHANNEL Valve spring AH100101-0529 109302-130NA FIXED-FLOW CONTROL VALVE VOLVOFM12 Universal*Headlight assembly

After tested by customers in USA and Russia for 1 year, AAK Proportional Solenoid Valve has been approved to be equivalent to original HydraForce SP08-20 Last September, we launched a proportional solenoid valve equivalent to HydraForce standard part SP08-20. A solenoid-operated, 2 port, normally closed, poppet-type, proportional, screw-in hydraulic cartridge valve, designed for low leakage blocking and load-holding applications. As mentioned in our article last year on 03/27/2023, AAK spent 6 months, 3 times material changes, 4 times testing to produce E-SP08-20 Solenoid Proportional Valve successfully. During the past year, we shipped test orders to customers in the United States and Russia. The Russian customer placed their regular order in August, and the American customer placed their regular order last week. The function and performance of AAK E-SP08-20 has been approved to be completely equivalent to original HydraForce SP08-20. AAK hydraulic proportional solenoid valve 2 advantages: 1. The quality of this valve is benchmarking HydraForce, but price is much cheaper. 2. The service life is 2 times that of domestic hydraulic cartridge valve manufacturers in China Technical parameters of AAK E-SP08-20 Hydraulic Solenoid Cartridge Valve: Max. Operating Pressure: 207 bar (3000 psi) Flow: 22 lpm (6 gpm) Internal Leakage: 5 drops/min max. at 207 bar (3000 psi) Operating Fluid Temperature: - 40 to 120 �°C (with Standard Buna N seals) Cavity: VC08-2 AAK E-SP08-20 Hydraulic Proportional solenoid valve, benchmarking HydraForce SP08-20, its service life is 2 times that of its domestic peers. You are welcome to give it a try. AAK HYDRAULIC VALVES (812) 2024-09-02

For Proportional Solenoid Valve equivalent to HydraForce SP10-20, AAK received re-peat orders from the 3rd customer within 18 months Last April, we launched a proportional solenoid valve equivalent to HydraForce standard part SP10-20. It is a solenoid-operated, 2-way, normally closed, poppet-type, proportional, screw-in hydraulic cartridge valve, designed for low leakage blocking and load-holding applications. Proportional valves are the ceiling of hydraulic cartridge valve manufacturers. Among more than 100 hydraulic cartridge valve manufacturers in Zhejiang Province, China, there are no more than 5 manufacturers who can produce proportional valves, with a proportion of less than 5%. However, AAK not only has SP10-20, but we have developed more than 10 models of proportional valves. Since E-SP10-20 proportional solenoid valve was posted, we have received the re-peat orders from 3 customers till now. Within 18 months, total 3 foreign customers tested AAK samples and place the re-peat orders, which proves that the E-SP10-20 proportional solenoid valves shipped by AAK has very stable quality and good performance. AAK hydraulic cartridge solenoid valve 2 advantages: 1. The quality of this valve is benchmarking HydraForce, but price is much cheaper. 2. The service life is 2 times that of domestic hydraulic cartridge valve manufacturers in China Technical parameters of AAK E-SP10-20 Hydraulic Solenoid Cartridge Valve: Max. Operating Pressure: 250 bar (3625 psi) Flow: 60 lpm (15 gpm) Internal Leakage: 5 drops/min max. at 250 bar (3625 psi) Operating Fluid Temperature: - 40 to 100 �°C (with Standard Buna N seals) Cavity: 10-2 AAK E-SP10-20 Hydraulic Proportional solenoid valve, benchmarking HydraForce SP10-20, its service life is 2 times that of its domestic peers. You are welcome to give it a try. AAK HYDRAULIC VALVES (810) 2024-08-19

Dual-function Hydraulic Cartridge Proportional Needle valve, AAK customized part replaced HydraForce standard part Devante is from a Spanish hydraulic equipment manufacturing company, and has been engaged in procurement for more than 5 years. Last February, they upgraded an injection molding machine, focusing on the selling point of "high speed when empty, low speed when heavy load". The engineer asked Devante to purchase the hydraulic cartridge proportional needle valve of HydraForce. During the equipment commissioning, it was found that the pressure relief and flow of the hydraulic system of the equipment was conflicted with the hydraulic cartridge proportional needle valve, resulting in unstable operation of the equipment and jitter. HydraForce said that there was no time to customize the hydraulic cartridge proportional needle valve. Devante contacted several cartridge valve manufacturers and had no news. Devante was very worried. Devante browsed AAK website on Google and left a message: 1. Can AAK customize the hydraulic cartridge proportional needle valve, and the performance benchmarking HydraForce? 2. The function of smooth flow passage is required. 3. The function of variable flow gain is required. At the beginning, I thought that he was requested for AAK hydraulic cartridge proportional needle valve to benchmark the standard parts of HydraForce, but it was turned out that he needed us to optimize the standard parts of HydraForce. According to the equipment abnormality video, the original hydraulic cartridge proportional needle valve drawing, and their required functions sent by Devante, after discussion, AAK engineers was 90% confident. Devante asked AAK to make samples. After 40 days, AAK sent 15 samples of cartridge proportional needle valves. 2 months later, Devante informed that the market promotion of the upgraded equipment was smooth. Their engineers were satisfied with AAK hydraulic cartridge proportional needle valves, especially its variable flow gain characteristics, and smooth flow characteristics, small pressure impact during pressure relief, and accurate flow control. We mainly made 3 ingenious actions on the valve housing and valve spool, and solved the problem that HydraForce didn't want to do. 1. The lower part of the valve spool is arranged in the valve housing and sealed with the valve housing line. The upper part of the valve spool is connected with the control cover plate, the upper end of the control cover plate is connected with the valve cover with threaded holes, and the displacement sensor is installed on the threaded holes of the valve cover. The lower end of the valve spool is connected with the upper cavity of the valve spool. When the valve spool is at the lowest end, the valve is closed. When the valve spool moves upward, the valve gradually opens.