Structure:
1) Ball nut: it can transfer the stress of surrounding rock to the pad.
2) Arch plate: can bear greater stress of surrounding rock.
3) Check plup plug: make the grouting maintain a certain pressure to fill the surrounding rock gap adequately.
4) Anchor bolt bar: the whole length of the intermational standard waveform connection thread, easy to install drill bit, coupling sleeve, fastening nut; and can be arbitrarily cut and connected to lengthen.
5) Bushing: so that the bolt can be lengthened to the design depth while drilling.
6) Broach: it has strong penetrating power, enabling the bolt to pass through all kinds of rocks.
Characteristic:
Self drilling bolt adopts good thick wall seamless steel pipe material, perfect and fast surface screw forming technology and well-made fittings, the function of drilling, grouting and anchoring has been realized.
1) There have a strong penetrating drill in front of the bolt, under the action of general drilling machinery, it can easily penetrate all kinds of rocks.
2) The bolt has a continuous international standard corrugated thread, which can be used as a drill pipe to complete the drilling of anchor hole.
3) The bolt body as the drill pipe does not need to be pulled out, and the cavity can be used as the grouting channel from inside to outside.
4) Hign efficiency grouting stopc ock enables grouting to maintain strong grouting pressire, fully fill the vold and fix the fractured rock mass, high stength washer and nuts can transfer the stress of deep surrounding rock evenly to surrounding rock, the purpose of mutual support between rock and anchor is achieved.
If you are intrested in our products please visit our website
Self-drilling anchor (SDA) combines drilling, insertion and grouting into one easy operation. It reduces project lead time and installation difficulty.Low carbon content in steel increases its ductility, reduces its brittleness, and resists corrosion cracking and carbon embrittlement. This choice of material significantly reduces occurrences where rockbolt may snap or buckle during onsite installation.
Cross counter sunk self drilling bolt / screws Finish: zinc coated Head style: cross recessed countersunk Length: 13 mm, 16mm, 19 mm, 25 mm, 32 mm, 38 mm, 50 mm, etc.. Materail: stainless steel, steel
Sealing Self Drilling Hexagon Bolts
Self Drilling Flanged Hexagon Bolts Size 1 , 2, 3
Stainless steel self drilling anchor bolt is made of stainless steel materials. It is an alloy steel self drilling anchor bolt which can resist corrosion in air or chemical corrosion conditions. Functions: Owning to its good welding performance & inoxidizability, stainless steel rock bolt are mainly used in the permanent support of large initial stress of surrounding rock, or other projects which have special requirement for corrosion resistance, such as sub-sea tunnel, seaport, seawall and some projects in the industrial pollution area. Conditions: It applied to marine environment and chloride corrosion. It is also used to chemical industry and infrastructures of important equipment which requires high anti-corrosion quality. It widely used in bay, pier, pile foundation, breakwater and mooring system. Features and advantages: 1. Good anti-corrosion quality and antioxidant activity. 2. High temperature oxidation resistance, resisting fire at a certain extent. 3. Stainless steel has good strength and high wear resistance. 4. Its anti-corrosion and resistance to chloride is prior to other coating re-bars due to its repairing oxide layer. Cases: Stainless steel self-drilling anchor bolt system is mainly used for tunnel and underground engineering, slope engineering, ground and foundation engineering. It can be used for pre-construction support and can effectively enhance the stability of soil and rock mass.
Anti-corrosion Mechanism Immerse the derusted anchor bar and accessories in liquid zinc for a certain time, so that the atoms can penetrate and diffuse each other, thereby forming an iron-zinc alloy layer, which is dense, uniform, firmly bonded, bright and corrosion resistant. Zinc is an amphoteric metal. In thermodynamics, zinc has a stable area. Hot-dip galvanizing is an electrochemical anti-corrosion method, which hinder further corrosion through insoluble chemical substances produced by interaction between zinc and concrete solution. Product Standard Sinorock has formulated the standard for galvanized products coatings in accordance with ISO 1461 " Hot dip galvanized coatings on fabricated iron and steel articles Specifications and test methods". The coating thickness of main products is as follows: Featurs and Advantages Excellent anti-corrosion properties: As zinc is an active metal, after coating surface is damaged, it will protect the steel by battery effect. Long service life: Zinc layer is consumed very slowly in the atmosphere, so its service life far exceeds that of any other coatings. Full protection: As immersed into hot-dip galvanizing bath, products are fully protected and anti-corrosion effect is better. Lower price: In most cases, the hot-dip galvanizing cost is lower. Zinc coating is more durable than others, and does not require maintenance in the future. High processing efficiency: Hot-dip galvanizing bath is simple and efficiency is higher than other coatings. Not affect steel performance: Hot-dip galvanizing is carried out in an environment of more than 400 �¢??, and will not affect the performance and toughness of steel. Service Life Generally, the service life of hot-dip galvanized products is more than 50 years in most environments, and it will be different according to corrosion level of the environment. According to ISO 12944-2 "Paints and varnishes- Corrosion protection of steel structures by protective paint systems-Part 2: Environmental classification" (equivalent to GB/T 30790.2), The table below lists the reference rates for different atmospheric-corrosivity environment categories.
Anti-corrosion Mechanism Duplex coating is a combination of hot-dip galvanizing and epoxy coating. Firstly, product is hot-dip galvanized, and then epoxy powder is sprayed on the surface. The anchor bolt has better anti-corrosion performance and longer service life after two kinds of anti-corrosion processes. It can not only resist ordinary chemical corrosion, but also work in acidic environment and electrochemical corrosion with stray currents. Product Standard Duplex coating combines all the performance parameters of hot-dip galvanizing and epoxy coating. Hot-dip galvanizing meets the requirements of the table below. Epoxy products are mainly based on EN 13438 Paints and varnishes - Powder organic coatings for hot dip galvanized or sherardized steel products for construction purposes, with a minimum coating thickness of 60um. Bending performance of epoxy coating complies with ISO 1519 Paints and varnishes - Bend test (cylindrical mandrel). Impact performance meets ASTM D2794 Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact). Adhesion conforms to ISO 2409 Paints and varnishes -Cross-cut test. Featurs and Advantages Excellent anti-corrosion properties: As zinc is an active metal, after coating surface is damaged, it will protect the steel by battery effect. Long service life: Zinc layer is consumed very slowly in the atmosphere, so its service life far exceeds that of any other coatings. Full protection: As immersed into hot-dip galvanizing bath�¯�¼?products are fully protected and anti-corrosion effect is better. Lower price: In most cases, the hot-dip galvanizing cost is lower. Zinc coating is more durable than others, and does not require maintenance in the future. High processing efficiency: Hot-dip galvanizing bath is simple and efficiency is higher than other coatings. After curing, the coating material will not melt even if it is heated again. It has high chemical stability. The formed coating has high adhesion to metal, low drying shrinkage and high ductility. In the case of the coating is not damaged during operation, it can effectively block corrosive substances. Service Life The service life of duplex coating anchor bolt is usually much longer than single anti-corrosion treatment, which is a synergistic effect. In most environments, the service life of duplex coating anchor bolt can reach 100 years without maintenance; the first maintenance service life of duplex coating anchor bolt in a severely corrosive environment is nearly double that of hot-dip galvanizing anchor bolt. Application Duplex coating anchor bolt is generally used in the permanent support of hydro-projects, underwater tunnels, subway tunnels and some important buildings affected by groundwater for a long time. And it is also widely used in harbors, wharfs, offshore buildings which are corroded by seawater.
Supplier: Self drilling anchor bolt, self drilling rock anchor, self drilling hollow bar, sda rock bolt