Standard Motion Sensor Module

DC Input Motion Sensor Module Standard Motion Sensor Module 5V/12V DC Input Microwave Motion Sensor - Standard Version HNS101D 5.8GHz C-band microwave, tri-level dimming function. Input voltage 12V DC (5V & 24V DC version available on request). Input current:25mA. Features 5.8GHz C-band microwave, tri-level dimming function. Input voltage 12V DC (5V & 24V DC version available on request). Input current:25mA. 5V DC PWM output or 0~10V DC signal. Super compact, flexible to be integrated into any suitable fixtures. Dual-PD technology, real Dayligh t m onitoring function for built-in application. 8 pin DIP switch setting, multiple options to meet different customer demands. Detection range up to 12m in diameter. Mounting height: 3~6m. Operation temperature; -20? ~ + 70?. RoHS compliant. Settings Detection range Detection range can be reduced by selecting the combination on the DIP switches to fit precisely each application. Hold-time Hold-time means the time period to keep the lamp on 100% after motion detected. *when hold-time set as 3s, sensor enters into test mode, this test mode is mainly for users to choose the desired detection range. In this mode, the daylight sensor is disabled, when there is no motion, fixture keeps off, when there is motion detected, fixture keeps a cycle of 3s on and 2s off. Daylight sensor Daylight sensor means the daylight threshold to enable or disable the sensor function. "Disable": The sensor works always, even during daylight. w50lux": The sensor works only in twilight. w10lux, 2luxw: The sensor works only in the dark. Stand-by period This is the time period that the lamp remains at a low light level before it is completely switched off in the long absence of people. ?+? means bi-level dimming control, the fixture never switch off. Stand-by dimming level This is the dimmed low light level you would like to have after the hold-time in the absence of people. Daylight monitoring function Utilizing the Dual-PD technology, this sensor can tell the difference of natural light and artificial light(lamp) from behind the diffuser, switch on automatically(even without movements) when the ambient light is below target value, and then switch off automatically whenever the artificial light is not required(ambient light is bright enough). This is the REAL & INTELLIGENT daylight monitoring sensor for built-in installation. Note: Lux-Off sampling time?30s; Lux-On sampling time?10s. Lux-On function takes effect only when standby dimming period set at.

DC Input Motion Sensor Module Standard Motion Sensor Module 5V/12V DC Input Microwave Motion Sensor - Standard Version HNS101D 5.8GHz C-band microwave, tri-level dimming function. Input voltage 12V DC (5V & 24V DC version available on request). Input current:25mA. Features 5.8GHz C-band microwave, tri-level dimming function. Input voltage 12V DC (5V & 24V DC version available on request). Input current:25mA. 5V DC PWM output or 0~10V DC signal. Super compact, flexible to be integrated in t o any suitable fixtures. Dual-PD technology, real Daylight monitoring function for built-in application. 8 pin DIP switch setting, multiple options to meet different customer demands. Detection range up to 12m in diameter. Mounting height: 3~6m. Operation temperature; -20? ~ + 70?. RoHS compliant. Settings Detection range Detection range can be reduced by selecting the combination on the DIP switches to fit precisely each application. Hold-time Hold-time means the time period to keep the lamp on 100% after motion detected. *when hold-time set as 3s, sensor enters into test mode, this test mode is mainly for users to choose the desired detection range. In this mode, the daylight sensor is disabled, when there is no motion, fixture keeps off, when there is motion detected, fixture keeps a cycle of 3s on and 2s off. Daylight sensor Daylight sensor means the daylight threshold to enable or disable the sensor function. "Disable": The sensor works always, even during daylight. w50lux": The sensor works only in twilight. w10lux, 2luxw: The sensor works only in the dark. Stand-by period This is the time period that the lamp remains at a low light level before it is completely switched off in the long absence of people. ?+? means bi-level dimming control, the fixture never switch off. Stand-by dimming level This is the dimmed low light level you would like to have after the hold-time in the absence of people. Daylight monitoring function Utilizing the Dual-PD technology, this sensor can tell the difference of natural light and artificial light(lamp) from behind the diffuser, switch on automatically(even without movements) when the ambient light is below target value, and then switch off automatically whenever the artificial light is not required(ambient light is bright enough). This is the REAL & INTELLIGENT daylight monitoring sensor for built-in installation. Note: Lux-Off sampling time?30s; Lux-On sampling time?10s. Lux-On function takes effect only when standby dimming period set at+?

AC Input Microwave Motion Sensor - Detachable Version + Remote Controllable Standard AC Input Motion Sensor Microwave Motion Sensors AC Input HNS204 5.8GHz C-band microwave motion sensor, on/off control. Operating voltage: 220~240V AC, 50Hz.(EU version) 120-277V AC, 60Hz.(US version) Features 5.8GHz C-band microwave motion sensor, on/off control. Operating voltage: 220~240V AC, 50Hz.(EU version) 120-277V AC, 60Hz.(US version) Rated load: 200W @ 120VAC, (capacitive) 400W @ 200~277VAC, (capacitive) Stand-by power: -

Microwave Motion Sensor Antenna Module Microwave Sensor Microwave Motion Sensor HNM01 Low cost. 5.8GHz C-band miniature transceiver. Patch antenna, antenna gain: 2 dBi. Beam aperture: 30 Features Low cost. 5.8GHz C-band miniature transceiver. Patch antenna, antenna gain: 2 dBi. Beam aperture: 30 2 balanced mixer. 5dBm EIRP output power. Receiver bandwidth: 1Hz ~ 2KHz. Operating current(CW mode): 13.5mA@5V. Low power consumption(Pulse mode): Average current: 1.5mA typ. Pulse width(min.):10~50 s(10kHz~2kHz) Duty cycle:10% DC RoHS compliant Tested to EN300 440 -

Low cost; 5.8GHz C-band miniature transceiver; Patch antenna, antenna gain:2 dBi. Beam aperture: 30º; 2 balanced mixer; 5dBm EIRP output power; Receiver bandwidth: 1Hz ~ 2KHz; Operating current(CW mode):13.5mA@5V; Low power consumption (Pluse mode); Average current:1.5mA typ. Pulse width (min.):10~50μs(10kHz~2kHz); Duty cycle:10% DC RoHS compliant Tested to EN300 400

5V/12V DC Input Microwave Motion Sensor - Standard Version DC Input Motion Sensor Module Adjustable Motion Sensor Module HNS101 5.8GHz C-band microwave. Input voltage 12V DC (5V & 24V DC version available on request). Input current:25mA. 5V DC high-low voltage output signal. Features 5.8GHz C-band microwave. Input voltage 12V DC (5V & 24V DC version available on request). Input current:�?�25mA. 5V DC high-low voltage output signal. Super compact, flexible to be integrated into any suitable fixtures. Dual-PD technology, real Lux-Off function for built-in application. 8 pin DIP switch setting, multiple options to meet different customer demands. Detection range up to 12m in diameter. Mounting height: 3~6m. Operation temperature: -20�?? ~ +70�??. RoHS compliant. Settings Detection range Detection range can be reduced by selecting the combination on the DIP switches to fit precisely each application. Hold-time Hold-time means the time period to keep the lamp on 100% after motion detected. *when hold-time set as 3s, sensor enters into test mode, this test mode is mainly for users to choose the desired detection range. In this mode, the daylight sensor is disabled, when there is no motion, fixture keeps off, when there is motion detected, fixture keeps a cycle of 3s on and 2s off. Daylight sensor Daylight sensor means the daylight threshold  to enable or disable the sensor function. "Disable":The sensor works always, even during daylight. w50lux, 25lux": The sensor works only in twilight. "10lux, 2lux": The sensor works only in the dark. -

5V/12V DC Input Microwave Motion Sensor - Standard Version DC Input Motion Sensor Module Adjustable Motion Sensor Module HNS101 5.8GHz C-band microwave. Input voltage 12V DC (5V & 24V DC version available on request). Input current:25mA. 5V DC high-low voltage output signal. Features 5.8GHz C-band microwave. Input voltage 12V DC (5V & 24V DC version available on request). Input current:25mA. 5V DC high-low voltage output signal. Super compact, flexible to be integrated into any suitable fixtures. Dual-PD technology, r eal Lux-Off function for built-in application. 8 pin DIP switch setting, multiple options to meet different customer demands. Detection range up to 12m in diameter. Mounting height: 3~6m. RoHS compliant. Settings Detection range Detection range can be reduced by selecting the combination on the DIP switches to fit precisely each application. Hold-time Hold-time means the time period to keep the lamp on 100% after motion detected. *when hold-time set as 3s, sensor enters into test mode, this test mode is mainly for users to choose the desired detection range. In this mode, the daylight sensor is disabled, when there is no motion, fixture keeps off, when there is motion detected, fixture keeps a cycle of 3s on and 2s off. Daylight sensor Daylight sensor means the daylight threshold� to enable or disable the sensor function. "Disable":The sensor works always, even during daylight. w50lux, 25lux": The sensor works only in twilight. "10lux, 2lux": The sensor works only in the dark.

Quick Sense (Qs-06): Plastic 360 Degree Mini PIR Motion Sensor 220V (White, Max 100W) -2 Pieces Pack MINI PIR Sensor Switch, Max load: 100 w Power Sourcing: 220V/AC-240V/AC, Detection Range: 360�° Can identify day and night: The consumer can adjust work ambient light. It works in the daytime and at night when it is adjusted on the â??+(sun)â?? position (max). It works in the ambient light of less than 10LUX when it is adjusted on the â??-(moon)â?? position (min). As for the adjustment pattern, please refer to the testing instructions. Time-Delay is added continually: When it receives the second induction signals after the first induction, it will compute time once more on the basis of the first time-delay rest. It can use with lamps, incandescent lamps (bulbs), old-fashioned fluorescent lamps, electronic fluorescent ring lamps, spotlights, transformers, small electrical appliances, and other all other appliance.