Replacement Belt Cassette

Supplier: Steel and stainless steel grinding abrasive disc, cutting wheels, stone cutting wheels, fibre disc alumina zirconia, flap disc, velcro disc, coated abrasive belts
Buyer: Abrasive raw materials such as brown aluminum oxide, binding agents, cryoloite, special thermal label and metal rings

Narrow v-belt widely used machinery and equipment on the momentum transfer. V-belt use high-power, high-speed, long-life, and small deformation space for small needs. V-belt not elongation, 15 and long service life and reduce replacement frequency, reduced maintenance time, reduce maintenance costs.

Power Twist Link V Belt is a high-performance V-belt that reduces vibration on table saws, drill presses, and other power tools by as much as 35%. It replaces the standard 1/2â?³ V-belt on most machines, and the length can be adjusted by removing links. Whereas traditional drive belts can stretch and become misshapen (creating vibration as they rotate), the Power Twist belt is made up of interlocking segments of polyurethane elastomer and multiple plies of polyester fabric that retain their original shape, thereby reducing vibration. Whats more, you can easily add or subtract links to get optimal tension on almost any machine! Features: Replaces the standard 1/2â?³ V-belt on most machines Can be adjusted by removing links High-performance V-belt reduces vibration Sold by the meters

Twisted woven endless round belts, twisted woven rope belts, twisted woven o-ring. These are truly endless belts, the joint of the belt gets builded-up in the weaving itself. These are made in nylon, polyester and kevlar yarn. These are extensively used in textile, spinning, woollen mills. These drive belts are quite suitable for machine tool industry. These replacement belts can be supplied on wooden board to make sure the accurate size. These rope belts can also be made in interlock weaving for high speed rotations. These belts are specially treated with industrial chemicals to reduce the elongation and to make the resistance against high temperature. These belts can be maid either in twisted or interlock weaving in the following sizes. Diameter : 3 to 24 mm or 0.13" to 2" Length : 360 mm or 14" to unlimited endless length.

RAW EDGE BELT widely used machinery and equipment on the momentum transfer. RAW EDGE BELT use high-power, high-speed, long-life, and small deformation space for small needs. RAW EDGE BELT not elongation, 15 and long service life and reduce replacement frequency, reduced maintenance time, reduce maintenance costs.

Corrugator belts Inwoven Aramid Edge is a consistent development based on the proven woven high speed corrugator belt range. Also is ideal for corrugating systems with high production speed, even load systems and frequently changing paper widths. Corrugator belts Inwoven Aramid Edge -Features Suitable as top belt with high speed (above 150 m/min) production Heat and super tear resistance Inwoven Aramid edge to reinforce the belts, reduce wear substantially and ensure a long lifetime. Particularly for frequent changes of board width Mostly used for all Corrugating Production Lines. Corrugator belts Inwoven Aramid Edge- Specification Product Corrugator Belt Inwoven Aramid Edge Thickness 8mm-10mm Width range 1000mm - 3200mm Length 80 meters Heat-resistance 240 (the kevlar edge upto 350) Tensile strength 70Mpa Coefficient of friction 0.40µ Weight per unit (7.5±0.3)kg/ Air-permeability 40mm water Column 2.0m min Seam Hot JAW lacing/Clipper with rubber coated Edge 100mm or 200mm inwoven aramid edge reinforcement (kevlar) Suitable position Top belt Lifetime 50-70 million meter Used on all corrugators high tearing resistance Long life time running High abrasion resistance Moisture absorption Heat resistance Low noise Corrugator Belts with Silicone Coating Technical Parameters Product High Speed Corrugator Belt Thickness 9mm Width range 1400mm - 3200mm Length 80 meters Heat-resistance 240�ºC (the kevlar edge upto 350�ºC) Tensile strength 70Mpa Coefficient of friction 0.40µ Weight per unit (7.5±0.3)kg/m2 Air-permeability 40mm water Column 2.0m³/m2/min Seam Hot JAW lacing/Clipper with rubber coated Edge 100mm -400mm inwoven aramid edge reinforcement (kevlar) Suitable position Top belt,Bottom  belt,Upper belt ,Lower belt

Corrugator belts Inwoven Aramid Edge is a consistent development based on the proven woven high speed corrugator belt range. Also is ideal for corrugating systems with high production speed, even load systems and frequently changing paper widths. Corrugator belts Inwoven Aramid Edge -Features Suitable as top belt with high speed (above 150 m/min) production Heat and super tear resistance Inwoven Aramid edge to reinforce the belts, reduce wear substantially and ensure a long lifetime. Particularly for frequent changes of board width Mostly used for all Corrugating Production Lines. Corrugator belts Inwoven Aramid Edge- Specification Product Corrugator Belt Inwoven Aramid Edge Thickness 8mm-10mm Width range 1000mm - 3200mm Length 8Suitable position Top belt,Bottom�  belt,Upper belt ,Lower belt

Corrugator Belt & Spare Parts Corrugator belts Inwoven Aramid Edge is a consistent development based on the proven woven high speed corrugator belt range. Also is ideal for corrugating systems with high production speed, even load systems and frequently changing paper widths. Corrugator belts Inwoven Aramid Edge -Features Suitable as top belt with high speed (above 150 m/min) production Heat and super tear resistance Inwoven Aramid edge to reinforce the belts, reduce wear substantially and ensure a long lifetime. Particularly for frequent changes of board width Mostly used for all Corrugating Production Lines. Corrugator belts Inwoven Aramid Edge- Specification Product Corrugator Belt Inwoven Aramid Edge Thickness 8mm-10mm Width range 1000mm - 3200mm Length 80 meters Heat-resistance 240 (the kevlar edge upto 350) Tensile strength 70Mpa Coefficient of friction 0.40 Weight per unit (7.50.3)kg Air-permeability 40mm water Column 2.0mmin Seam Hot JAW lacing/Clipper with rubber coated Edge 100mm or 200mm inwoven aramid edge reinforcement (kevlar) Suitable position Top belt Lifetime 50-70 million meter Used on all corrugators high tearing resistance Long life time running High abrasion resistance Moisture absorption Heat resistance Low noise Corrugator Belts with Silicone Coating Technical Parameters Product High Speed Corrugator Belt Thickness 9mm Width range 1400mm - 3200mm Length 80 meters Heat-resistance 240C (the kevlar edge upto 350C) Tensile strength 70Mpa Coefficient of friction 0.40 Weight per unit (7.5 0.3)kg/m2 Air-permeability 40mm water Column 2.0m m2/min Seam Hot JAW lacing/Clipper with rubber coated Edge 100mm -400mm inwoven aramid edge reinforcement (kevlar)

Our Raw Edge Cogged Belts (Classical, Wedge, Banded, VS, etc) are engineered with high performance synthetic elastomers that ensures high heat resistance. These belts have excellent wear resistance and bending stress resistance due to the cogged profile that enhance the durability. Raw Edge Cogged Belts are recommended in high speed Industrial power transmission drive running 24 X 7 where critical machine designs that need high durability between changes. Also, the Raw Edge Cogged Belts are most efficient replacement for Conventional Classical Wrapped belts at no cost for pulley change and smaller pulley drive designs.