QSC-10 Blowing Style De-stoner is to separate stone, clod by adjusting wind pressure, amplitude and other parameter, larger proportion material stone will sink down, move bottom to up under stress of vibration friction;smaller proportion material moves up to bottom. With internal fans, no need to install wind net system, The Fans and vibration system are equipped different motors, noninterference adjustment; vibration part motor with a transducer, which using different frequency for small particles of material (millet), medium materials (mung bean, soybean), large granular materials (kidney beans, broad beans) to achieve the best good effect to remove stone.
1.Cleaning system In this section, firstly, pre-clean the wheat in raw material bin. Clean out the big impurity and remove dust in the wheat. In this process, remove most impurity and keep the workshop clean. Then the wheat go to the next step for further cleaning to clean out the middle and small impurity by washing stoner, classifying stoner, magnetic separator and other machines. In this part, all the wheat will be cleaned and dampened ready to be milled. 2.Milling system The technology in milling part consists of the milling process and sifting process. 3.Packing system This part is connected with milling part and is fully automatic, including bagging part, weighting part and sewing part. 4.Control system This line is fully automatic 5.How to pack and load in container? The machines are packed by plastic film inside and wooden case s outside or iron sheet packing. The machine will fixed by steel rope inside the container. Make sure it is in good condition when arrived destination.
1.Cleaning system In this section, firstly, pre-clean the wheat in raw material bin. Clean out the big impurity and remove dust in the wheat. In this process, remove most impurity and keep the workshop clean. Then the wheat go to the next step for further cleaning to clean out the middle and small impurity by washing stoner, classifying stoner, magnetic separator and other machines. In this part, all the wheat will be cleaned and dampened ready to be milled. 2.Milling system The technology in milling part consists of the milling process and sifting process. 3.Packing system This part is connected with milling part and is fully automatic, including bagging part, weighting part and sewing part. 4.Control system This line is fully automatic 5.How to pack and load in container? The machines are packed by plastic film inside and wooden case s outside or iron sheet packing. The machine will fixed by steel rope inside the container. Make sure it is in good condition when arrived destination.
1.Cleaning system In this section, firstly, pre-clean the wheat in raw material bin. Clean out the big impurity and remove dust in the wheat. In this process, remove most impurity and keep the workshop clean. Then the wheat go to the next step for further cleaning to clean out the middle and small impurity by washing stoner, classifying stoner, magnetic separator and other machines. In this part, all the wheat will be cleaned and dampened ready to be milled. 2.Milling system The technology in milling part consists of the milling process and sifting process. 3.Packing system This part is connected with milling part and is fully automatic, including bagging part, weighting part and sewing part. 4.Control system This line is fully automatic 5.How to pack and load in container? The machines are packed by plastic film inside and wooden case s outside or iron sheet packing. The machine will fixed by steel rope inside the container. Make sure it is in good condition when arrived destination.
15T Rice Mill Machine Total Power: 30.1KW Weight: 1600kg Capacity: 600-800kg/h Dimension: 3000*2500*2900mm The HB15 rice mill machine is an advanced rice mill plant which has a capacity of processing rice 15tons per day, It includes two kinds of elevators, single chain and double chain. Single chain is for raw paddy, and double chain for paddy separator. There is also de-stoner to remove dust and stone from raw paddy, it is designed with high pressure blower to help clean the paddy. The rice huller with double rubber rollers to remove chaff from Paddy Paddy separator will separate brown rice, paddy, and mixture of paddy and brown rice. Rice whitener mill brown rice into white rice. This rice whitener is designed with emery roll, high pressure blower and Bran collection device. Broken Rice Separator separates broken rice out from complete rice.
Introduction QF3000 is specially designed for sunflower seeds processing: cleaning, de-stoning and calibrating. In the cleaning part, we use double air-channel to remove light impurities and empty seeds pneumatically. The de-stoner is designed with frequency adjuster so that users can make adjustment with different seeds. The calibrators multi-layer screens classify sunflower seeds to different sizes. By changing screens, the machine can also be used to process other crops like bean, corn, linseed, etc. MACHINE LIST Elevator I, cleaner, elevator II, de-stoner, elevator III, calibrator. features of each part I. Cleaner: The cleaner SC75 can sort out smallest seeds and light impurities. It is movable as well as the elevator so that the machine can be moved with less manpower. We use enhanced vibration base to support the larger motors. The entrance and exit of the machine are covered with watching windows. Capacity: 3000-3500kg/hr (for oil-type sunseeds) Power: 9.75Kw Weight: 1735kg Size: 3.92Ã? 2.43 Ã?3.44 M Sunflower seed combined cleaner II. De-stoner This machine DS60 is kind of gravity separator. In the force of air, seeds and stones are suspending in different level and then move in different directions under the vibration force. Controlled by a frequency inverter, the vibration as well as the air volume can be changed according to different seeds. Capacity: 3000-4000kg/hour Power: 4.0kw Weight: 800kg Size: 1.93Ã?1.8Ã?1.84m Sunflower seed combined cleaner III. Calibrator The calibrator use 3-4 level changeable screen to calibrate seeds to different sizes. Capacity: 3000-5000kg/hr Weight: 1300kg Power: 1.5kw Size: 4.8Ã?1.8Ã?1.6m Sunflower seed combined cleaner Specification of whole line Power Length (m) Height (m) Breadth(m) Purity after processing(raw materials impurities content about 5%) 380V/17.5kw 13.8 3.5 2.6 99.5%
175 Model Grain De-stoner have greatly higher capacity basic on the model of 125 Grain De-Stoner, through optimization of the screen and transmission parts.This De-stoner is designed for effective removal of stones and iron, dirt, glass and other heavy impurities from crops, i.e. sunflower seeds, kernels, water melon seeds and wheat, etc. The materials passes on an inclined vibration screen with fish-skin. Materials and high density waste are separated using upward current air passed with the help of a dust removal. The heavy impurities (stones) fall through the air stream and are discharged from stone outlets. Grains suspended then sink down to grains outlet. Air volume and angle of screen can be adjusted to meet an optimal degree of separation according to different materials, and matched with cyclone can achieve the best processing effect. In addition, the excellent removal of high-density impurities like stones protects the downstream processing equipment and thus perceptibly reduces its wear and tear.
The Grain De-Stoner is designed for effective removal of stones and iron, dirt, glass and other heavy materials from crops, i.e. sunflower seeds, kernels, water melon seeds, wheat and rice, etc. The materials passes on an inclined oscillating fish-skin like screen. Materials and high density waste are separated using upward current air passed with the help of a blower. The heavy materials (stones) fall through the air stream and are discharged from stone outlet. Grains sus pended then sink down to grains outlet. Air volume and angle can be adjusted to meet an optimal degree of separation according to different materials. In addition, the excellent removal of high-density impurities like stones protects the downstream processing equipment and thus perceptibly reduces its wear and tear.
Through years of scientific research and production practice, FOTMA have accumulated sufficient rice knowledge and professional practical experiences that also based on broadly communication and cooperation with our customers around world. We can provide complete rice milling plant from 18t/day to 500t/day, and different kinds of rice milling machines like rice husker, destoner, rice polisher, color sorter, paddy dryer, etc.. This 50-60t/day integrated rice milling line which developed by our company is the ideal device that produce high-quality rice. It is made in advanced technology and has the character of compact structure, high white rice yield, easy to install,operate and maintain. performance is stable, reliable and durable. The finished rice comes out with glittering and translucent. It is warmly welcomed by our users and customers around the world. The necessary machine list of 50-60t/day integrated rice milling line: 1 unit TQLZ100 Vibrating Cleaner 1 unit TQSX100 Destoner 1 unit MLGT36 Husker 1 unit MGCZ10012 Paddy Separator 3 units MNSW18 Rice Whiteners 1 unit MJP100 4 Rice Grader 4 units LDT150 Bucket Elevators 5 units LDT1310 Low Speed Bucket Elevators 1 set Control Cabinet 1 set dust/husk/bran collection system and installation materials Capacity: 2-2.5t/h Power Required: 114KW Overall Dimensions(L�?W�?H): 15000�?5000�?6000mm The optional machines for 50-60t/d integrated rice milling line: MPGW22 Rice Water Polisher; FM4 Rice Color Sorter; DCS-50 Electronic Packing Scale; MDJY60/60 or MDJY50�?3 Length Grader, Rice Husk Hammer Mill, etc.. The features of 50-60t/day integrated rice milling line: 1. This integrated rice milling line can be used to process both long-grain rice and short-grain rice(round rice), suitable to produce both white rice and parboiled rice, high output rate, low broken rate; 2. This line is combined with bucket elevators, vibration cleaner, de-stoner, husker, paddy separator, rice grader, dust remover, it is practical and eco-friendly; 3. Equipped with 3 units low temperature rice polishers, triple milling will bring high precision rice, more suitable for commercial rice business; 4. Equipped with separate vibration cleaner and� de-stoner, more fruitful on impurities and stones removing. 5. Equipped with enhanced polishing machine, can make the rice more shining and glossy; 6. All spare parts are made by high quality materials, durable and reliable; 7. The complete set of equipment arrangement is compact and reasonable. It's convenient to operate and maintain, saving workshop space; 8. The installation can be based on steel framed operation platform or concrete flatbed according to customers requirement; 9. The rice color sorting machine and packing machine are optional.
The 120T/day modern rice processing line is a new generation rice milling plant for processing raw paddy from cleaning rough impurities such as leaves, straws and more, removing stones and other heavy impurities, husking the grains into rough rice and separating rough rice to polish and clean rice, then grading the qualified rice into different grades for packaging. The complete rice processing line includes pre-cleaning machine, vibrating sieve cleaner, suction type de-stoner, rice husker, paddy separator, rice whiteners, water mist polisher, rice grader and color sorter, automatic packing machine, main working machines and magnet sorter, conveyors, electrical control cabinet, collecting bins, dust-discharging systems and other accessories, also as per request the steel storage silos and paddy drying machine can be supplied, too. FOTMA machines has been widely exported to Nigeria, Australia, Indonesia, Iran, Guatemala, Malaysia, etc., and also we got rich experiences� from these overseas rice milling projects. The 120t/day modern rice processing line includes the following main machines: 1 unit TCQY100 Cylindrical Pre-cleaner(optional) 1 unit TQLZ150 Vibrating Cleaner 1 unit TQSX125 Destoner 2 units MLGQ25E Pneumatic Rice Hullers 1 unit MGCZ46 20 2 Double Body Paddy Separator 3 units MNMLS40 Vertical Rice Whiteners 2 units MJP150 4 Rice Graders 2 units MPGW22 Water Polishers 2 units FM5 Rice Color Sorter 1 unit DCS-50S Packing Scale with Double Feeding Hoppers 4 units W15 Low Speed Bucket Elevators 12 units W6 Low Speed Bucket Elevators 1 set Control Cabinet 1 set dust/husk/bran collection system and installation materials Capacity: 5t/h Power Required: 338.7KW Overall Dimensions(L W H): 3500 12000 10000mm The optional machines for 120t/d modern rice processing line: Thickness grader, Length Grader, Rice Husk Hammer Mill, Bags type dust collector or Pulse dust collector, Magnetic separator, Flow Scale,
