Zirconia fused alumina Brief introduction
Zirconia fused alumina was made from aluminum and Zirconium oxide by melting above 2000 in the electric arc furnace and cooling.Then the huge Zirconiafused alumina lump be crushed into different size,from a few mm to 0.8 um.
Zirconia fused aluminas physical properties
chemical composition(%)
Grade ZrO2 Al2O3 TiO2 Fe2O3 SiO2
ZA25 24%-30% 68%-72% 5%max 0.5%max 1.0%max
ZA40 35%-44% 55%-57% 1.5%max 0.5%max 1.0%max
physical properties
1 Color Gray
2 True density 4.20g/cm3
3 Bulk density 2.18g/cm3
4 Moh's hardness 9.0
Zirconia fused aluminas size &Application
1.Application :top refractory, slide gate nozzle,submersed nozzle,brick ,building materials.
Section sand 0-1mm,1-3mm, 3-5mm,5-8mm,etc
Fine powder 100f,200f,325f ,etc.
2.Application :bonded abrasives,abrasives belt,grinding,heavy duty wheel grinding, cutting discfiber discgrinding rails
Granularity sand/granular sand / grit size sand/grain size sand
FEPA F4F5F6F7F8F10F12F14F16F20F22F24F30F36F40F46F54F60F70F80F90F100F120F150F180F220
JIS 4#5#6#7#8#10#12#14#16#20#22#24#30#36#40#46#54#60#70#80#90#100#120#150#180#220
Red Garnet/ Garnet Abrasives have uses such as sand blasting media, water jet cutting, hole drilling & lapping, and making coated or bonded abrasive tools. We provide Garnet Mesh: 10/20, 20/40, 30/60, 40/60, 60/90, 90/120, 120/180, 180/240, 20/25, 25/30, 30/35, 35/40, 40/45, 45/50, 50/60, 60/70, and 70/80.
Brown Fused Alumina is fused and crystallized under the high temperature of above 2250°C with high quality bauxite, carbon and iron as raw material. Our product characterized by high purity, good crystal, strong fluidity, low coefficient of linear expansion, good corrosion-resistance and so on. Could not burst, no pulverization and crack in using course of refractory.
Brown fused alumina is produced by the smelting of Calcined Bauxite in an electric arc furnace at temperatures greater than 2200. A slow solidification process follows the fusion, to yield blocky crystals. The melting help in removing residual carbon , Strict control over Titania levels during the fusion process ensures optimum toughness of the grains. Then The cooled crude is further crushed, cleaned of magnetic impurities in high intensity magnetic separators and classified into narrow size fractions to suit the end use. Brown Fused Alumina is a tough, sharp abrasives which is highly suitable for grinding metals of high tensile strength. Its thermal properties make it an excellent material for use in the manufacture of Grinding wheels and refractory products. This material is also used in other applications like blasting and surface hardening.
We are distributors of brass coated Rasper.
Quick Details Place of Origin:Henan, China Brand Name:Yihong Model Number:Sanding paper Type:abrasive belt Size:Customized abrasive belt grains:Domestic or VSM Zirconia Application:heavy grinding and polishing for steel, alloy steel, cast iron Color:blue Grit:36#~400# abrasive bond:resin and resin Belt width:3-120mm Belt Length:305-820 Feature:high polishing performance, long life All materials:A/O, Calcined A/O, Z/O, Ceramic, SC Certificate:ISO9001:2000 Supply Ability:1000000 Piece/Pieces per Month
Supplier: Attapulgite, barite (grey & white),bentonite,(sodium & calcium) dolomite, feldspar, kaolin, quartz lumps, quartz grits, quartz powder, ramming mass, abrasive sand, fly ash, silica fumes(white & grey) ggfs,ggbs, phosphogypsum, gypsum powder & lumps, precipitated calcium carbonate(pcc, gcc), precipitated silica,natural & quartz silica sand for sports grounds and infill for synthetic turf, beach volleyball court, artificial beach, grow beds of aquaponics, bunker sand etc..
Silicon carbide si made from hte mixture of pure silica sand and green petroleum coke in ultra high power acheson furnace. Electric current is passed through t h e conductor,bringing about a chemical reaction ni which the carbon ni the coke and silicon ni the sand combined ot form SIC and carbon monoxide gas. Silicon carbide si With annual capacity for 60,000 tons of silicon carbide, we can provide different grade of silicon carbide to meet different clients' requirements, such as 70% SIC, 80% SIC, 85% SIC, 90% SIC, 93% SIC and 98% SIC, etc.We also provide customized size for 90% SIC and 98% SIC, such as 200 mesh and 325 mesh Fe203 Al203 Free carbon 3,5%MAX Moisture Size(mm) Ha-SIC-01 90% min. 1.5% max. 15.% max. 35.% max. 0.5% max. 1-5/1-10 HQ-SIC-02 90% min. 1.5% max. 1.5% max. 3.5% max. 0.5% max. 0-10 HQ-SIC-03 88% min. 1.5% max. 1.5% max. 3.5% max. 0.5% max. 0-1/1-10 HQ-SIC-04 98% min. 0.6% max. 0.6% max. 0.2% max. 0.5% max. 0-1/1-3 HQ-SIC-05 70% min. 2% max. 1% max. 10% max. 0.5% max. 1-10
Wholesale white corindon for coated abrasives was made from the high quality alumina by melting above 2000 in the electric arc furnace and cooling.White corindon is white with the main crystal phase alpha-Al2O3.The White corindon produced in titling electric arc furnace has the advantage of high bulk density and low porosity and the volume stability and thermal shock resistance can be improved. Purpose: 1.Bonded abrasives and Coated abrasives 2.Floor/Wall Laminates 3.Thermal Spraying(Plasma Spraying) 4.Lapping & Micro-blasting applications 5.Surface preparation and finishing 6.Super Refractories,Ceramics and Tiles 7.Brake linings Available sizes; Grain: 0-1mm 1-3mm 3-5mm 5-8mm Fine powder: 0-100mesh 0-200mesh 0-320mesh Grit: 8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220# Micro powder: ï¼?FEPAï¼?F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500 (JIS) #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000 #2500 #3000 #4000 #6000 #8000 #10000 Chemical analysis: Al2O3(min) 99% SiO2(max) 0.4% Fe2O3(max) 0.2% Na2O(max) 0.4% Physical characteristics: color white Mohs Hardness 9.0 Melting point 2250 Bulk density 1.75-1.95g/cm3 Real density 3.95g/cm3 Contact information E-mail mia@hxabrasive.com Mob 008613592570797 Whatsapp +8613592570797 Wechat 13592570797 Skype Mia Wen
Zirconia Fused Alumina grains based on ISO standard, FEPA standard, P standard for coated abrasives & JIS standard. Grits availabe are as following: FEPA standard: F12~F120 ISO standard: F12~F120 P standard: P12~P120 JIS standard: #12~#120. A.40 x 25kg plastic woven bags in one big bag. B. In 1000kg big bag. C. In 25kg plastic woven bags. D. 40 x 25kg plastic woven bags on pallet. E. 40 x 25kg paper bags on pallet.
