Our SLHY horizontal ribbon mixer for animal feed production is widely used in feed mills, for mixing powder materials, guaranteeing uniformity and quality of complete feed. During the convection process of the feed mixing machine, the two materials are mixed through penetration and displacement and then mixed during the tumbling process on both sides. This is repeated many times and finally mixed by the unloading device. Then the material is discharged from the discharge door.
1000L Horizontal double Ribbon Mixer Product Description 1,Major components : mixing barrel, ribbon agitators, discharging part , driven unit and machine body. 2, Sizes : available from 50-10000L customized. 3, Material: Carbon Steel, Stainless Steel 304, Stainless Steel 316L optional. 4,Discharge : Flap valve, butterfly valve, slide gate valve, ball valve 5,Rotation Speed: stable speed or variable speed control by frequency inverter. 6, Heating :mixer can be equipped with heating or cooling jacket if needed
Shj series single-shaft twin screw animal feed mixer is a horizontal and a batch type, have the special rotor structure and high mixing degree. The cleft between rotor and main body casing can be adjusted. There is the wide-door or full-opened door at the bottom, make the materials convenient for pouring. Both ends of machine are designed double-deck, avoid to discharge materials. The discharge outlet is controlled by the pneumatic way (also dynamo-electric or manual ), make the action more accuracy and sealing function acting more better. In addition, the oil pipe is installed inside the machine, has the whole structure reasonable, figure beautiful, and in favor of machine operation and maintain.
WLDH Model Horizontal Stainless Steel Double Ribbon Blender Mixer,Horizontal double ribbon mixer Powder-liquid Mixer Descriptive abstract: WLDH The Horizontal Ribbon Mixer consist of U-Shape tank, spiral and drive parts. The spiral is dual structure. Outer spiral make the material move from the sides to the center of the tank and the inner screw conveyor the material from the center to the sides to get the convective mixing. Our WLDH series Ribbon mixer can mix many kinds material especially for the powder and granular which with stick or cohesion character, or add a little liquid and paste material into powder and granular material. The mixture effect is high. The cover of the tank can be made as open in order to cleaning and change parts easily. Main features: 1.This mixer wide application for mixing material, for paste mixing even; keep granule mixing intact 2.Material proportion different 1:1000 ~5000 perfectly mixing. 3. The ribbon of the mixer can make the material mixed with more high speed and uniformity in short time. WLDH horizontal ribbon mixer is used for application to, power and power; granule and granule; powder and a few liquid mixing; it is widely used in food, chemical industry, pharmaceutics, feed stuff, plastic, building material and so on; Customizing according to clientâ??s specific requirement, it can be from 304,316L,321 and carbon steel etc. it can be according to GMP standard, too. WLDH series mixer with Horizontal tank , single shaft with dual spiral symmetry circle structure. The top cover of the U Shape tank has the entrance for material. It can be also designed with spray or add liquid device according the customerâ??s needs. Inside the tank there equipped the axes rotor which consist of,support and spiral ribbon. Under the bottom of the tank, there has a flap dome valve (pneumatic control or manual control) of the center. The valve is arc design that assure no material deposit and without no dead angle when mixing. Reliable regular-seal prohibit the leakage between the frequent close and open. The ribbon of the mixer can make the material mixed with more high speed and uniformity in short time.
Ribbon Blender Salient Features : * High mixing efficiently * Spray nozzles can be provided for spraying additives * Prefect distribution of even smallest quantities * Homogenized final product * Low space and height requirement * Shearing / kneading action/ Jacketed design.
Supplier: Ribbon blender, paddle mixer, extruder parts, feedmill parts, press tools, jigs & fixture, agarbathi machine parts, mechanical components.
Supplier: Pharmaceutical machineries, fluid bed dryer, vibro shifter, sifter, multi mills, octagonal blender, coating pans, rapid mixer granulators, double cone blenders, colloid mills, drum mixers, starch paste kettle, liquid filling machines, capsule filling, ovens industrial, pressure vessels, screw conveyors, tray dryers, reactors, ribbon blenders, mass mixers, cream manufacturing plants, ointment manufacturing plant, liquid manufacturing plant, storage tanks, sparkler filter press
What is dry mortar : Dry mortar is also called pre-mixed mortar, which made in the factory by precise batching and uniform mixing. It can be used directly just by adding water in construction site. It has different properties though adding different additives. The demand for dry mortar has increased rapidly due to its outstanding merit compare to the mortar production in job-site. Raw material of dry mortar : 1. Cementing material: cement, lime, plaster. 2. Aggregate: yellow sand, quartz sand, limestone, dolomite, expanded perlite etc. 3. Mineral admixture: industrial byproduct, industrial slag, fly ash, pozzolana, fine silica powder etc. 4. Water-retention and thickening material. 5. Chemical additives. Product Description : Automatic production line of dry mortar with double shaft mixer, the machine is integrated into the generation of more new models based on the technical essence of system research and development, with automatic feeding and pneumatic feeding, bucket wall without product piece, no dead Angle, etc. Our company produce all kinds of dry mortar equipment has cover an area of an area small, reasonable structure, simple operation, high efficiency, no dust, dynamic configuration reasonable, moderate investment, short construction period, investment, quick effect, etc Composition of equipment : 1. Cement silo 2. Screw conveyor 3. Double shaft paddle mixer 4. Control system 5. Weighing system 6.Premix system 7.Bucket elevator 8.Packaging machine 9. Dust collector 10. Steel platform 11. Feeder 12. Air compressor Working Principle and Process : Working Principle : Materials are fed into surge bin from customer`s hopper. This process is controlled by a rotary gate and a pneumatic valve on top of the surge bin. The feeding proess is controlled by a frequency convertor operated impeller and a valve at the spout. When reaching target value, the impeller stops and the feeding valve closes, sack-clamping device is open and the filled bag could be moved out manually or automatically. The machine is ready for a new filling circle. According to requirements of the customers, the system can be equipped with 3-6 bulk storage bins, the material in which will, after being processed by the metering and batching system, be conveyed to pending-for-mixing bin, and then fed into the high-efficiency biaxial agravic mixer for continuous mixing. The finished product in conformity with mixing accuracy requirements can be sent to the finished products bin shortly after mixed. Moreover, there is design with automatic rationing and packaging machine at the bottom of finished products bin, allowing for synchronous auto-packaging operation. Featured with easy and convenient operation, high efficiency, it can both obviously reduce labor intensity and effectively reduce dust pollution.
WZL series automatic stainless steel double shafts paddle mixer,Non Gravity Blender Paddle Mixer machine,weightless mixer Descriptive abstract: Weightless mixer, non gravity mixer is called double-shaft paddle mixer too, it is widely applied in mixing powder and powder, granule and granule, granule and powder and a bit liquid. It is used for food, chemical, pesticide, feeding stuff and battery etc. It is high precision mixing equipment and adapts to mix different sizes of materials with different specific gravity, the proportion of formula and mixing uniformity. It can be a very good mix for which ratio reaches 1:1000~10000 or more. The machine can make the partial of granules broken after crushing equipment added. Main features: 1. High activeRotate reversely and throw materials to different angles,mixing time 1-3min 2. Compact design and rotated shafts be filled with hopper, mixing uniformity up to 99% 3. Low residue:Only 2-5mm gap between shafts and wall, open-type discharging hole 4. Zero leakageï¼?Patent design and ensure the rotating axle & discharging hole w/o leakage 5. Full cleanï¼?Full weld and polishing process for mixing hopper, w/o any fastening piece like screw,nut. 6. Nice profile: the whole machine is made by 100% stainless steel to make its profile elegant except bearing seat. Application: It is widely used in chemical, cosmetics, fine chemicals, fertilizers, pesticides, metallurgy, mining, building materials, ceramics, refractories, dry mortar, food, feed, paint, dyes and other powders, solid-liquid, solid -slurry materials' mixing. Specifications: model WZL300-WZL3000 effective volume 300L-3000L Fully volume 420-3800 Loading factors 0.6-0.8 turning speed 39rpm-53rpm total weight 660kg-2900kg total power 5.5kw-22kw length 1530-2420 width 1250-2300 height 1300-1980 power supply 3P AC208-415V 50/60Hz
