Ningxia biyuan activated carbon co., ltd. Sells high-quality steel-making recarburizer / carbon additives, the main raw material is a unique high-quality anthracite coal, with low ash and low sulfur characteristics. Gas calcined anthracite, carbon additives have two main uses, namely as fuel and additives. Used as a carbon additive for steel smelting and casting. By replacing the traditional carbon reductant petroleum coke can effectively reduce the cost of steel making, it can also increase the carbon content of steel cast ductile iron.
Ningxia biyuan activated carbon co., ltd. Is a professional manufacturer and has about eight years of different filter media production and domestic historical trade. Now we are committed to developing our international trade. We adhere to the principle of "integrity management, quality service". Our employees are professional and sincere, and our prices are fair. Look forward to working with you.
Carbon additive sold by Ningxia Biyuan Activated Carbon Co., Ltd. is a kind of filter material for water treatment. It can be used for ordinary acid, moderate alkali treatment. The product has a large surface area and all indicators exceed the standards of the Ministry of Construction. Anthracite filter media are particularly selected from deep well minerals and therefore contain the highest percentage of carbon. Raw materials are often filtered and washed to ensure that the product has a good effect on water filtration. Ningxia Biyuan Activated Carbon Co., Ltd. is a professional manufacturer and has about eight years of different filter media production and domestic historical trade. Now we are committed to developing our international trade. We adhere to the principle of "integrity management, quality service". Our employees are professional and sincere, and our prices are fair. Look forward to working with you.
Our Powder activated carbon is manufactured using pure pine wood which is an excellent base for manufacturing activated carbons with good adsorption power. The steam activated process is done by activating the charcoal in a rotary kiln by heating at high temperatures by steam. The activated carbon that comes out from the kiln is called unwashed activated carbon. These unwashed activated carbon has higher ash and iron content. This is reduced by washing the unwashed activated carbon with acid (HCl / H2SO4) and purified water. This results in reduction of ash content to as low as 1% and iron as low as 50 ppm. The gradation of different qualities of activated carbon is done on the basis of Methylene blue value and iodine value. The iodine value is a better test as the particle size of iodine molecule is small enough to penetrate the smallest of pores. We can relate the iodine value of activated carbon directly to its surface area because of the above fact.
Granular activated carbons are made from rigid raw materials, giving the necessary hardness to avoid excessive losses due to attrition and handling. They present large internal surface of pore structure, ensuring high adsorption power in specific purposes and uses. They are used in fixed or moving beds as columns where the liquid or gas passes through and gets purified. They can be used in liquid or gas phase continous adsorption process and offer unusual economy in cases where carbon regeneration is favorable. In liquid phase applications they remove colloids and organic substances that give undesirable odors, colors and taste to the products. They are efficiently used for water dechlorination in processes which require super chlorination as well as the removal of organic substances from the water. In vapor phase application they participate in the solvent recovery, adsorption of colors, purification of carbon di-oxide and catalyst support. They are also used to reduce the COD and BOD in effluent waste water. Granular activated carbon is produced from coconut shell charcoal by the process of steam activation. The coconut shell charcoal is fed into the rotary kiln and activated by steam at high temperatures resulting in the evaporation of impurities and opening up of pores on the surface. The resultant big particles are then crushed and sieved to get the desired particle size. Our main grades of granular activated carbon are given as under. We can customize the iodine value as well as the particle size according to your requirements
Granular activated carbons are made from rigid raw materials, giving the necessary hardness to avoid excessive losses due to attrition and handling. They present large internal surface of pore structure, ensuring high adsorption power in specific purposes and uses. They are used in fixed or moving beds as columns where the liquid or gas passes through and gets purified. They can be used in liquid or gas phase continous adsorption process and offer unusual economy in cases where carbon regeneration is favorable. In liquid phase applications they remove colloids and organic substances that give undesirable odors, colors and taste to the products. They are efficiently used for water dechlorination in processes which require super chlorination as well as the removal of organic substances from the water. In vapor phase application they participate in the solvent recovery, adsorption of colors, purification of carbon di-oxide and catalyst support. They are also used to reduce the COD and BOD in effluent waste water. Granular activated carbon is produced from coconut shell charcoal by the process of steam activation. The coconut shell charcoal is fed into the rotary kiln and activated by steam at high temperatures resulting in the evaporation of impurities and opening up of pores on the surface. The resultant big particles are then crushed and sieved to get the desired particle size. Our main grades of granular activated carbon are given as under. We can customize the iodine value as well as the particle size according to your requirements
To suit the requirements of water purification, modern approach is to filtering huge volumes of water contaminated with many organic and inorganic contaminants but in form of blocks along with reverse osmosis, UV irradiation, mineral addition, etc. Carbon blocks are engineered and manufactured using compression molding or extrusion for different applications such as dechlorination, bad taste and odour removal, chloramines and organic materials removal, VOC removal, heavy metal removal, etc. Carbon blocks provide effective and versatile filtration for a wide range of different applications such as sediment and chemical removal. - Manufactured from coconut shell based low ash, micro porous Activated Carbon. - Designed to be used in most standard size housings. - High adsorptive capacity & high Iron, HMR & VOC removal Capacity - Simultaneously removes chlorine, bad taste, odour and organic contaminants from water. - Provides particular filtration and high dirt capacity. Size & Diameter can be customised as per the Buyers requirements
CHM REMOVAL BLOCK (Heavy Metal Removal) - Heavy metal (HM) is any metallic chemical element are highly toxic for both animals and human beings, and can be bio-accumulated through biological chains and are non-biodegradable and persistent. Their toxicity may occur due to industrial emission that contaminates waterways, nearby streams and rivers, contamination of irrigation water, the application of fertilizer and metal-based pesticides, harvesting process, transportation, storage, or sale. Elements, such as Cadmium and Chromium, are considered carcinogenic, while Iron, Copper, Manganese, Zinc, and Nickel are considered essential trace elements. Arsenic is also another heavy metal which is available in almost 70% bore well water. Therefore, it is essential to purify the water to make it potable. The conventional methods for heavy metal removal from waste water which includes chemical precipitation, reverse osmosis, and solvent extraction are expensive. Adsorption on adsorbent such as active carbon or modified active carbon is an alternative method, because it is cost effective and simple to design. Size & Diameter can be customised as per buyer's requirement.
Carbon additive 1. Product description: The main raw material is ningxia unique high quality anthracite, with characteristic of low ash and low sulfur. Carbon additive/carbon raiser has two main uses, namely as the fuel and additive. When being used as the carbon additive of steel-smelting, and casting, the fixed carbon may achieve above 95%. 2. Application: It may substitute massively refinery coke or the stone grinds. Meanwhile its cost is much less than the refinery coke and the stone grinds. Carbon additive/carbon raiser may also use as the fuel, for its calorific value may achieve above 9386k/kg. It may substitute burnt carbon massively. The burnt carbon exportation needs the quota; therefore the carburizing agent price superiority is similarly obvious. 3. Specification: Carbon raiser: 90%min; s: 0.35%max; ash: 8.5%max; v.M: 1.5%max; h2o: 0.5%max; 91%min; s: 0.35%max; ash: 8%max; v.M: 1.2%max; h2o: 0.5%max; .C: 92%min; s: 0.3%max; ash: 6.5%max; v.M: 1.2%max; h2o: 0.5%max; 9:f.C: 93%min; s: 0.3%max; ash: 5.6%max; v.M: 1.2%max; h2o: 0.3%max; ,94%min; s: 0.25%max; ash: 5.0%max; v.M: 1.0%max; h2o: 0.5%max; ,f.C: 95%min; s: 0.25%max; ash: 4%max; v.M: 1%max; h2o: 0.5%max; Size: 1-5mm/1-4mm, 90%min, or at customers' option; Moq: 40mt(20mt for a 20' container); Packing: in 25kg small bags or in 1mt/1.2mt big bags;