Grinding Cast Iron Ball

Part characteristic The surface hardness of ball will be raised further in using the course, and the wear resistance would gather hard, so can raise mill machine production capacity at the same time, and raises cement ratio surface area and reclaim ratio of the extractive mind. Details view three W dot chinagrindingmedia dot com or Skype: kathysong0425 Specification: A: high hardness in+surface hrc 58-65 and core hrc 56-62 B: good wear resistant C: few breakages D: no mal-roundness. Woven bag or steel drum.

Our cast iron grinding balls can be divided into three categories including the high chromium type, medium chromium type and the low chromium type. 1. The quality index of the high chromium type The chromium content of the high chromium type product is greater than or equal to 10.0%. And the carbon content is between 1.80% and 3.20%. It is required by the national standard that the hardness of the high chromium type product must be no less than 58hrc, and that the impact value should be greater than or equal to 3.0j/cm. This type of product must go through the hot quenching and the tempering treatment to come up to the hardness. Currently at home, there are two quenching methods for this type of product including oil quenching and wind quenching. If the tested hardness of this type of product is below 54hrc, then it shows that the quenching treatment is omitted. 2.The quality index of the medium chromium type The medium chromium type cast iron grinding ball is defined as the chromium content ranging from 3.0% to 7.0%, and the carbon content coming between 1.80% and 3.20%. Its impact value should be no less than 2.0j/cm. . The national standard requires the hardness of this type of product should be greater than or equal to 47hrc. For ensuring the quality, the medium chromium type product should be processed with high temperature tempering to eliminate the casting stress. If the surface of the steel ball assumes the dark red color, it proves that the steel ball has been processed with high temperature tempering. If the surface of the steel ball still comes with the metal color, then, we can judge that the steel ball doesn’t go through the high temperature tempering treatment.

Size: 12.7mm-120mm Surface hardness: hrc58-66 Chemical elements: c: 1.8-3.3; si: 0.3-1.2; mn: 0.3-1.0; s & p: 0.1max; cr: 10-30( details can be adjusted by users demand). Id from 12.7mm to 130mm high chrome grinding media

Products detail: Size: dia20mm to dia150mm Production capacity: 100ú¼000ton/year Characteristics: high hardness, good wear resistance, no breakage, even wearing. Applied field: mines, cement plants, power station, chemical industries etc. Packing: by steel drum or big bag.

Cast grinding balls High chrome casting grinding iron ball for mining Application of chrome grinding balls : 1)cement plants 2)mines 3)power stations 4)chemical industries 5)grinding mill, ball mill, coal mill Features of cast balls: 1) in general, high chrome casting grinding iron balls are famous for high hardness: surface hardness is to 60-68 hrc and volume hardness of 58-65 hrc; 2) high impact toughness: impact toughness is more than 12 j/cm2; 3) low broken rate: the actual broken rate is not higher than 1%; 4) wear-resistant: loss of grinding round rate is 80-500g/ton; Specification: 20-150mm Packing term 1) steel drums (with pallet): 850-900kg/drum 2)container bags: 1000kg/bag Steel drum or container bags

Place of Origin: Shandong, China (Mainland) Brand Name: HUAMIN Model Number: Nonstandard Products Application: Mill,Cement Plant,Power Station,etc, Mine,Cement,Electric Power Plant,Chemical and other industries Material: Steel Dimensions: 20-150MM Diameter: Dia.20mm-Dia.150mm Surface Hardness: 55-67HRC Core Hardness: 45-63HRC Certification: ISO9001, ISO14001,ISO18001 Packaging: Steel Drum or Steel Barrel,Container Bag Drop Test Times: more than 2000 Impact Value: more than 15J/cm2 Raw Material: High-Quality Round steel Key words: Forged Steel Grinding Ball Packaging & Delivery Packaging Details Steel drum or Steel barrel  Container Bag Delivery Time 15days

Supplier: Forged (rolling)grinding balls, forged (rolling)grinding rods, high chrome cast ball, high chrome cast cylpebs
Services:
Buyer:

Shandong Huamin Steel Ball Joint-stock Co., Ltd. is the largest manufacturer and exporter of grinding balls and grinding rods, it was established in 1986, and it already have 36 years grinding media experience. Our annual production capacity is 200,000tons, and products are mainly exported to America, Canada, Chile, South Africa, Australia, Guinea, Mali, Mongolia and so on. We hold the only automatic roll forging machine for grinding steel ball in China which developed by ourselves. The raw materials that we use are high quality alloy steel. The hardness of grinding steel ball is high and steady; the toughness is good controlled by equipment. The quality of our products can meet different requirements of clients in different countries and regions. 1. Forged grinding steel balls Want higher grinding efficiency? For gold mining or cement industry? Then you can choose forged grinding steel balls, which are available in all stages of milling. Huamin forged steel ball can be divided into low carbon, medium carbon, high carbon steel ball based on the carbon percentage. The carbon content is below 1.2%. The chromium content is 0.1%-1.3%. 2. Cast grinding steel balls As another type of grinding media, cast grinding steel balls can provide Cr (1%-28%), hardness (HRC40-66), and Diameter (10mm-150mm) alloy cast steel balls. They can be divided into low chromium, medium chromium, high chromium, super high chromium grinding ball (CR20%-28%). The forged steel grinding ball is excellent in surface quality, toughness, and resistance to impact and abrasion. It won't crack and lose circularity easily. 1) In general, forged grinding steel ball has high hardness: Surface hardness to 55-67 HRC, volume hardness of 56-64 HRC 2) impact toughness high: Impact toughness more than 12 J / cm2. 3) broken rate is low: Peel fragmentation resistance property of over 20000 times. The actual breakage rate not greater than 1% and close to 0.