Uv aging test chamber uses a fluorescent uv lamp as a light source to accelerate the weatherability test of the material by simulating uv radiation and condensation in natural sunlight to obtain the result of weatherability of the material.
Applications
1. Simulate the sun, rain spray and condensation resulting damage to test the materials by exposure to sunlight with moisture and temperature.
2. To get the results of damage after several days or weeks which is equal to expose to outside for a few months. The damages include fading, discoloration, brightness down, powder, crack, blur, brittle, strength decreases and oxidation.
3. Provide reference with testing data for improvement of existing materials, or to assess the impact of changes in product durability and other aspects.
Supplier: Insulation resistance tester, wire&cable chipping machine, heat aging test chamber, uv light irradiation cross linking equipment
LED-UV2 type UV-light irradiation cross-linked cable equipment Ultraviolet Irradiation Crosslinking Equipment UV LED devices are the most advanced UV radiation sources in the world, characterized by extremely high energy efficiency (about 30%), extremely high selectivity of effective wavelength (half-power wavelength broadband: 5nm), extremely long service life (40,000 hours), low infrared heat and no ozone, making them more suitable for the cross-linking and solidity of cross-linked polyolefin and other materials. LED-UV type UV LED irradiation polyolefin cross-linked equipment adopts a circular cavity tunnel structure, installs a self-developed UV LED light source and forms a tunnel to the central area, whose radiant power can be infinitely set within the scope of 0~100%. Structural features of LED-UV irradiation cross-linked equipment: It pneumatically turns to enable the tunnel structure, which is easy for operation, cleaning and coiling; It uses the intelligent touch-type human-computer interface to monitor data, and the power of operating buttons is set on the touch screen interface; One push function co-exists with separate start; It uses refrigerating fluid for cooling, and uses anti-freezing solution dedicated for automobiles as cycling medium; It is connected to an external fume removal unit to exhaust fume to the outdoor through the air flue.
The UV-light irradiation cross-linking process uses UV-light as the irradiation source, extrudes and coats the mixed photo-crosslinking polyolefin compound on the conductor wire core, and then immediately enters the special irradiation equipment for fused photo-crosslinking. The insulated wire core after light irradiation cross-linking can be produced into photo-crosslinking polyolefin insulated wire and cable products through cooling treatment at different temperatures and other subsequent processing. UV-light irradiation cross-linking method needs to be slightly modified only on the original normal extrusion production line. The upper traction, irradiation box and electric control cabinet with a small floor area can meet the operating requirements and produce UV-light irradiation cross-linked polyethylene wire and cable products. The addition of upper traction enables the conductor wire core to maintain a certain tension. In the running process, it shall be always in the center of irradiation box to ensure the best irradiation effect. The irradiation box uses a reflective focused UV light source that is uniformly configured and specially designed, and the electrical control system will ensure that the UV-light intensity and the irradiation temperature in the center of the irradiation box are in the optimum operating conditions. In addition, the efficient photo-initiation system rapidly induces cross-linking reaction of polyolefin under the UV-light irradiation, so that the irradiation equipment can reach a continuous production speed of dozens of meters per minute, and gradually cools at hot, warm and cold temperatures to ensure the stability of three-dimensional cross-linked netlike structure.
Probe Hygrothermograph Wire and Cable Peripheral Equipment Cable Detection Equipment Applicable temperature range: -10-50 Applicable humidity range: 10-99%RH Temperature measurement accuracy: ±1 (1.8°F) Humidity resolution: 1%RH Applicable battery: AAA1.5V dry battery Product weight: 150g
DQ-630 Type Four Terminal Wiring Clamp I. Overview DQ-630 type universal conductor resistance clamp is the auxiliary equipment for measuring the DC resistance of wire and cable conductors, which can be used together with QJ36, QJ57, SB2230, PC36C and other double bridge and digital bridges to measure conductor resistance. It meets the standard requirements given in GB/T3048 Test Method for Electrical Performance. The baseplate is made of aluminum alloy section, and is provided with independent clamping head on current end and voltage test end. The current-end clamping end may be used to adjust the distance with the test end (voltage clamping head) according to the sectional area of the conductor measured. In addition, its performance indicators and technical parameters comply with the requirements of relevant national standards. II. Main technical parameters Current-end shape: Right-angle jaw shape Voltage-end shape: Right-angle knife shape Contact width of clampï¼?45mm Space between current and voltage ends: Adjustable range Length of measurement wireï¼?1000mm Maximum cross section of the sample ï¼?630 mm²
Ozone aging test chamber use ozone generator to produce high concentrations of ozone, can be used for non-metallic materials, organic materials (coatings, rubber, plastics, paints, pigments, etc.) aging test under ozone conditions. Chamber structure and features 1, internal material adopts high quality mirror stainless steel for ozone resistance. 2, insulation material: high-density glass fiber 3, use long axial fan motor and high and low temperature resistant aluminum alloy wing type wind turbines to force vertical air circulation. 4, chamber door adopts double layer high and low temperature resistant silicone seal ensure the airtight test area. 5, chamber bottom has high quality caster for convenient move. 6, observation window uses multilayer hollow tempered glass. 7, exhaust system: exhaust the high concentration ozone from the test chamber to avoid to poison. 8, optional: built-in 360 degree rotation sample holder, including 3 sets static tensile fixture and 3 sets dynamic tensile fixture.
Xenon aging test chamber can simulate the full sunlight spectrum of xenon arc lamp to reproduce the destructive light waves in different environments, to provide the appropriate environmental simulation and accelerated test for scientific research, product development and quality control. Main feature: 1, ventilation system: automatic controlled by temperature controller, and inner chamber cooled by refrigerating system 2, back panel thermometer: adopt wired transmission technology, which highly improve the control accuracy. 3, temperature sensor: pt100 platinum resistance thermocouple. 4, equip with intelligent temperature and humidity controller, with pid adjustment and rapid self-turning. It can set several parameters to do cyclic test, directly digital temperature display for easy reading. 5, multiple protective devices: over temperature protection, water leakage alarm, over pressure of compressor, electricity leakage protection, alarm and auto power offer protection. In order to protect xenon light, the light will turn off automatically once open the door.
Supplier: Various test equipment , such as temperature & humidity test chamber, high low temperature test chamber, walk in chamber, salt spray chamber, aging tester, drying oven,uv aging chamber, ozone chamber, dust chamber,mechanical vibration tester and other quality testing instruments.
Supplier: We manufacture and export a large range of high quality, diverse goods, such as the cass cum salt spray test chamber, salt spray lab chambers, laboratory melt flow indexers, bursting strength testers, ozone aging test chambers, and uv light accelerated weathering testers. providing our clients with top notch services is what drives us. effective lab has always ensured that, through close client collaboration tailored to their demands, both product quality and customer happiness are reached. our whole product line is expertly made utilizing premium materials in compliance with industry standards.
Buyer: The corrosion resistance of our painted, powder coated and plated items is tested in effective lab's salt spray test chamber. the best way to test the life of paint, coating and plating is to perform a salt spray test. such as powder coating, zinc plating, nickel and chrome plating, ced coating, phosphate surface, alloy plating, and electroplating copper, tin and chromium, among others. among the manufacturers of salt spray testing machines, effective lab india is one of the best. we custom built our salt spray chamber, in compliance with astm b117, iso 9227, jis z2371, astm g85 standards and other specifications. using compressed air and a salt solution, we create a saline environment within this chamber. the solution will use a ratio of 95 parts dm water and 5 parts nacl (98% lab grade).
