Lcd Elevator Display Sn-Lcd-L57001

LCD Indicator for elevator Display View Area: 115mm x 64mm

Supplier: Vcm-series digital voice synthesizer, voice announcer for elevator, electronic chime for elevator arrival, lcd indicator for lift, voice module application

1. Automatic operation: automatically open the door;automatic time-lapse closing;manual closing in advance. 2. Closing protection: if anyone enters into the elevator while the door is closing, it will stop closing to open again. 3. Full-load directional operation: when the elevator reaches the largest load, it will only respond to the instructions inside. 4. Energy-saving function: if no one uses the elevator during the setting time, the illumination and air blower in the car will turn off automatically and turn on with the instructions. 5. Non-stopping floor setting: the passenger can set the non-stopping floor according to his need. 6. Calling button diagnosing function: the system will ignore the floor-choosing instruction when the calling button of this floor is closed for a long time. 7. Hibernate function: when the elevator is not in use in the setting time, the monitor will hibernate to increase the lifespan 8. Intelligent operation(observation elevator): when the elevator is in use, the elevator will choose the best operation mode according to the passenger number and time.

01.Attendantless Operation:Automatically stop at leveling and open door,and automatically close door with time delay. In addition,manually close door before set-time of close door,automatically store interior floor selection and automatically respond external inturn calling. 02.Attendant Operation:Selection by driver,automatically open door when stop at leveling,and automatically store interior floor selection,automatically respond external in-turn calling,and manually close door. 03.Safety of Colse Door:When colse elevator door,if someone or goods are entered,the action of close door is stopped at once and open door again. 04.Overload Protection:If the load of elevator exceeds rated load,the overload indicating lamp will light and alarm is sounded.The elevator will not be run if the door is not closed. 05.Full Load by Pass:If load of elevator reach rated load,the elevator only responds interior call,and not respond external call from sanei observation elevator manufacturer 06.Function of Energy Saving:If the elevator is not operated,the illumination and fan inside car will be autoomatically turned off.They will be turned on qutomatically at once by instruction at any time. 07.Stop Nearby when Fault Occurs:If the fault occurs when elevator running in midway,the elevator will slowly run to nearest floor,stop at open-door zone and then automatically open car door. 08.Arrival Chime:when the elevator runs before stop at the floor,the clock will be sounded to remind passenger that the elevator will stop at the floor. 09.Emergency IIIumination of Car:If the power of illumination is broken,the emergency lamp inside car will be lighted automatically. 10.Auto Return to Landing:The elevator will automatically return to appointed landing if no internal or external calling signal.(the landing can be discretionarily set) 11.Auto Leveling when Power On:If elevator runs at non-door-zone when power is broken,the elevator will automatically reach the leveling position after power is on again. 12.Over-Speed Protection:When the running speed exceeds rated speed due to fault,the electrical and mechanical protection functions will be started to prevent car running from excess of up and down range. 13.Anti-Mischief Function:If exceeding 3 interior calling inside car when elevator load is below setting value,the system will delete all calling and re-select floor. 14.VIP Service Function:When elevator is at VIP service state,the calling inside car will be executed firstly to ensure quick arrival of passenger inside car. 15.Door Nudging with Buzzer:If the time of open door exceeds setting time,the system will close door compulsively and the close door protection function will be neglected temporally. 16.Internal Communication:If the elevator is in abnormal state,the persons in car,at car roof and bottorm pit can communicate with machine room or control room. 17.Inspection and Diagnosis for Faults:When fault occurs,the system of elevator can automatically diagnose the causation of fault,and store the information into systerm for maintenance personnel call. 18.Repeat Close Door:After executing instruction of closing door,if door lock circuit is not connected within specified time,the elevator will re-open the door and then re-close the door. 19.Parking Function:When service of elevator is stopped,any floor can be selected to park elevator. 20.Function of Auto Start and Stop Elevator:If no operator for elevator,auto start and stop elevator can be set based on requirement. 21.Elimination of Mis-Operation:If passenger select floor in error,the floor can be re-selected after eliminating mis-operation. 22.Setting any Non-Stop Floor:The user can set any temporary non-stop floor based on requirement. 23.Setting any Indicating Character of Floor:The user can set any indicating character of floor based on requirement. 24.Self-Diagnosis Function of Call Button:When the call button in some floor is on for long time,the system will neglect the call request of this floor. 25.Dormancy Function of Floor Display:If no one uses the elevator over setting time,the LCD will enter into dormancy state to raise the service life of LCD.

Type: elevators place of origin: shanghai china (mainland) brand name: sanei Model number: sn-525 usage: observation elevator drive type:traction machine Elevator type: passenger elevators certification: iso9001-2000, ce, gost, jab traction machine: gearless or gear machine Colour: customer requirement machine room:machine-room or machine-roomless power source: electric Place of origin: shanghai, china capacity: 800kg, 1000kg, 1250kg car deciration:stainless steel hairline finish... Drive system: vvvf observation elevator:observation elevator manufacturer.

Elevator push buttion sn-pb965 Lift parts button, resistor, elevator control cabinet, elevator parts limit switch, elevator magnetic level sensor, air conditioner manufacturer Transparent plastic characters with braille, illuminant halo and characters Omron b3f-5000 switchc Crystal feeling, illumination in background Abs base with metal circle outer frame and surface Comply with gb24477, standard of accessibility to lifts for disablde persons Sunny has been specialized in producing elevator accessories for many years such as elevator parts photoelectric switch, button, lop, cop, integrated elevator drive, elevator fan, interphone, weighing measuring device, elevator buttons, travelling cable, oil can, resistor, lift parts display, resistor, elevator control cabinet, elevator parts limit switch, elevator magnetic level sensor, air conditioner.

Root elevator for all pattern

Plays music Announcer floor numbers Announcer special messages Announces ard messages

Supplier: Vibrating screen, gyratory sifter, bucket elevator, Circular Screen