Superhydrophobic Reactive Monomer

Water Treatment DEHA is used in Water Treatment Chemical Formulations for controlling corrosion in boiler very effectively due to its property of oxygen scavenge scores over conventional hydrazine hydrate since it is far less toxic and meets the standard for disposal of blow offs without any difficulty giving good protection against corrosion at the same time. Polymerization DEHA's powerful free radical scavenging ability coupled with its moderate volatility and relatively low order of acute toxicity makes it an ideal "po Polymer "/ vapour phase inhibitor for olefins or styrene monomer storage & recovery system. Because of its capability of inhibiting polymerlzatlot the gas phase, DEHA is finding use as an in-process inhibitor for the production of styrene, divinylbenzene, butadiene, isoprene and other monorr containing a reactive double bond. â?¢ Photographic Chemicals DEHA has reducing property, so it is used as an auxiliary chemical photographic developer for instant colour photos. Also, DEHA is effective in stabilization of image and in the prevention of discolouration. Decolourisation Phenol and Phenolic antioxidants can be decolourised with DEHA. Inhibitors DEHA also can be used as a colour stabiliser of monoalkyl phenol. Silicon Rubber DEHA can be used as a raw material for the hardener of the Silicon Sealant and coating agent. Storage Can be stored and handled in equipment made of stainless steel of Type SS304 or SS316 or steel lined with glass, polypropylene or polyethylene Storage in mild steel equipment or containers is not recommended. DEHA drums should be stored in a cool and well ventillated area, away from sources of ignition. Forms two layers for concerntration from 33 to 87 wt %. Packing 25 kg, 180 kg net wt. in HMHDPE carbouys & drums . Health &Safety DEHA is irritating to skin,eyes and the mucous membrane. In case of contact,affected area to be washed with plenty of water for atleast 15 minutes. In case of inhaltion,victim should be moved to fresh air and oxygen should be administered. In case of ingestion,victim should be made to consume copious quantity of milk and water. Medical advice should be sought at once. Personal protective equipment should always be used while handling.

Styrene Monomer (SM) CAS Number 100-42-5 Formula C8H8 Styrene is a colorless to yellowish oily liquid with a distinctive aromatic odor. It is sparingly soluble in water but soluble in alcohols, ethers and carbon disulfide. This valuable monomer is flammable, reactive and toxic. Styrene Monomer is a light liquid. It has a low vapour pressure and high refractive index. SPECIFICATION Purity, 99.9423 wt %. Ethyl benzene < 10 ppm wt. Polymer 1 ppm wt. Color (APHA) 8.1 APHA Aldehydes, as benzaldehyde NIL Chlorides, total, as Cl < 1 ppm wt. Sulfur, total, as S < 1 ppm wt. Peroxides, expressed as H2O2 10 wt.% Inhibitor, TBC 40 ppm wt. S. Gr. 0.908 MAJOR USE: To make latex, synthetic rubber, and polystyrene resins, plastic packaging, disposable cups and containers, insulation, and other products. Styrene is also produced naturally in some plants. These products are available in bulk, drums & bags delivered from Kandla, Mundra, Hazira, Mumbai and Vizag ports & Bhiwandi and Ahmedabad stock points.

Supplier: Dimer acid, polyamide resin, hot-melt adhesive, reactive polyamide resin and monomer acid

Manufacturer leading quality OH Terminated Polydimethylsiloxane CAS: 70131-67-8 High molecular OH-terminated Polydimethylsiloxane CAS No. :70131-67-8 MOLECULAR FORMULA :HO[-Si(CH3)2O-]nH Other Names: 107hydroxy silicone oil, Hydroxy polydimethylsiloxane, Hydroxyl-terminated polydimethylsiloxane, OH-termianted silicone oil, OH-terminated silicone polymer, High molecular hydroxy silicone oil, Hydroxy end group polydimethylsiloxane, OH Polymer, Dihydroxyl polydimethylsiloxane, Hydroxyl dimethyl polysiloxane, Silanol-terminated polydimethylsiloxane, Polydimethylsiloxane silanol Terminated. JP107 Polymer Hydroxyl silicone oil is the organosilicon material polymerized by siloxane monomer terminated with hydroxyl groups . Conventionally the hydroxyl silicone oil with viscosity above 1500 mpa.s is called 107silicone sealant/adhesive. Apart from general functions of hydroxyl silicone oil, this product possesses the reactivity of hydroxyl group that can be made into some new material or crosslinked as elastomer(or film body). This product is colorless transparent liquid with excellent electrical insulation, high and low temperature resistance,high flash point, low freezing point,long-term adaption to temperature from -50°C to 250°C, low viscosity-temperature coefficient, high compression rate, low surface tension, good water repellent and moisture resistance, chemical inertness, physical inertness. [MAIN PROPERTIES] Excellent waterproof and dustproof performance; Sealing for various installation of aluminum alloy glass doors and windows; Sealing for organic glass, polycarbonate. Excellent weather resistant performance and excellent ageing resistant performance; Excellent adhesion to most of building materials and excellent compatibility with other neutral silicone sealants. APPLICATION Used as main raw material in RTV mold silicone rubber, defoamer and silicone glass cement. 1. Used as insulating, moisture resistant, anti-shock and heat resistant perfusion sealing material in radio, electronic equipment, semiconductor and other electronic components and assemblies. 2. Used as rubber roller material in automobile and machinery industry. 3. Used as rubber roller material in textile, plastic and printing industry. 4. Caulking sealing material in construction industry. 5. It has excellent mold release performance, particularly suitable for the manufacture of precision mold and impression materials.

Chemical name: 2,4-Diethylthioxanthone CAS No.: 82799-44-8 Molecular formula: C17H16OS Molecular weight:268 Appearance: Yellow crystalline powder Purity, %: 99 min. Melting point, degree: 66 - 70 Volatility, %: 0.5max. Photoinitiator DETX is a highly effective Type II photoinitiator. In conjunction with tertiary amine synergists, it is used to initiate radical polymerization of unsaturated oligomers e.g. acrylates and used in UV-curing coatings and inks. It can be used in combination with mono or multi functional monomers as reactive diluents.

Properties Cas number: 1072-63-5 Appearance: Colorless to yellow transparent liquid Content: 99.0% Boiling Point: 184 92 Molecule formula and weight: C5H6N2; 94.12 Water Content: 0.5% Application 1. Intermediates for organic synthesis; 2. Reactive diluent for UV coatings(ink, adhesives, general coating), always combined with vinylpyrrolidone in UV coatings; 3. Additive in automobile acrylic refinish; 4. Monomer of aqueous polymer(oil and cosmetic) 5. Additive in oil and lubricating oil

Monomer: Acetoacetoxyethyl methacrylate ( AAEMA) CAS: 21282-97-3 Applications: 1. Acetoacetylated polymers 2. Reactive monomer for UV cure applications

HSN Code : 29025000 Synonyms : Ethenylbenzene, Cinnamene, Cinnamenol, Ethenylbenzene, Phenethylene, Styrol, Vinylbenzene, Vinylbenzol. CAS No. : 100-42-5 Molecular Formula : C8H8 Application : Styrene is a colorless to yellowish oily liquid with a distinctive aromatic odor. It is sparingly soluble in water but soluble in alcohols, ethers and carbon disulfide. This valuable monomer is flammable, reactive and toxic. Styrene Monomer is a light liquid. It has a low vapour pressure and high refractive index. Styrene polymeric form is used in making corrosion-resistant pipes and tanks. Styrene is used in making Composite products, these products are known as fiber-reinforced polymer composites (FRP). These components are used in making automobile components. Styrene is used to make products such as rubber, plastic, insulation, fiberglass, pipes, automobile parts, food containers, and carpet backing. Most of these products contain styrene linked together in a long chain (polystyrene) as well as unlinked styrene.