Electromechanical Unviersal Testing Machine

Supplier: Electric tools, hardware tools

Compression Testing Machine

Supplier: Jigs & fixtures, gauges, drill jig bushes, clamping and tooling components, valve testing parts with equipments , machined components for valve
Services:

Supplier: Industrial measuring & testing equipments, electrical equipments

Supplier: Diesel Generating Sets, Power Tools, Cutting Tools, Hand Tools, Natural Gas Generators, Test Instruments, Research Instruments & Equipments

Used for testing crushed rock, crushed slag, crushed and uncrushed gravel for resistance to abrasion. Specifications: The machine consists of a hollow cylinder mounted horizontally on a study frame on ball bearings Compete with abrasive charge consisting of a set of hardened stainless steel balls, approximately 48mm dia It has an opening which can be closed with a dust tight cover to facilitate charging and discharging the drum with the material under test A revolution counter is fitted to the frame. • control panels: auto. Preset counter, stop and start push buttons. (optional at extra cost). A tray is supplied for collecting of the material at the end of the test A detachable shelf which extends throughout the inside length of the drum which catches the abrasive charge and does not allow it to fall on the cover The drum is rotated by an electric motor through a heavy reduction gear at a speed of 30-33 r.P.M Suitable for operation on 440 volts, 3 phase, 50 cycles, a.C. Supply. • all material parts are made of stainless steel except the frame. Optional accessories (optional at extra cost): • control panels: auto. Preset counter, stop and start push buttons.

Main function and characteristic: This machine adopts hydrocylinder underneath type, the assembly key of oil-fountain-oil-pump motor setíóflooding valveíóchange-direction valve are the brand products, the computer measure display of amplifier is ourselves produce, in good interface. It can display test forceíótest force peak valueíóloading speed. It according with the requirements of the standard of< GB/T228-2002 Metallic materials- Tensile testing at ambient temperature>,it used do tensileíópressureíóbending and cutting for metal and non-metal materials. Main Technical Parameters: Max. test forceú¦ 1000kN Scope of test force measureú¦4-1000kN Accuracy of measure test forceú¦í+1% Journey of piston ú¦ 250mm Max. journey speed of pistonú¦50mm/min Displacement measure distinguishú¦ 0.01mm Deformation measurementú¦Four-shelves measure, each shelf full measuring span of 20%, í+0.5%FS Max.tensile spaceú¦750mm (Include piston journey) Max.pressure spaceú¦ 580mm Thickness of flat specimenú¦ 0-40 mmú+ Dia. Of round specimenú¦ ª¦13-ª+60mm Size of platenú¦ ª+160mm Distance of bending testing rollsú¦60mm-700mm Width of rollsú¦ 140mm Beam travels speed about: 120mm/min Mode of clampú¦Hydraulic pressure clamp Size of outlineú¦ 1000í-700í-2350mm

Compression testing machine used for testing the strenght of cement and concrete 900mm * 500 mm, 200 kg

Supplier: Test equipment, power supplies, probes, radiation testers, test meters, calibrators, surveying equipment and other equipment with high-quality new and used test equipment
Services: Export