Capillary Liquid Expansion Thermostat

DTS-CT intelligent precision thermostatic bath is a new type of intelligent thermostat introduced by our company. It adopts touch screen control and operation, completely intelligent man-machine interface, and the control is more convenient, simple and practical. A dual-cavity side stirring technology is used in the structure to make the constant temperature bath reach the ideal uniform temperature field through intelligent PID adjustment, which can meet the verification / calibration work of various temperature sensors such as low temperature thermocouples, industrial thermal resistors, pressure thermometers, bimetallic thermometers, glass liquid thermometers, etc.
1. Intelligent Manipulation
Large touch screen control, intelligent man-machine interface, multi-function display window, control more intuitive, simple and fast;
2. Slope heating
The temperature control rate is adjustable, the heating rate is set according to the actual verification or calibration, and the temperature rise is uniform, which meets the verification / calibration of various temperature switches.
3. Volatility tips
Wave motion of 10 or 1 min can be displayed, the fluctuation can be calculated automatically, and the temperature is judged intuitively.
4. Intelligent rehydration
The automatic rehydration function can be set up, and the oil transportation system can complete the rehydration function after starting, so as to avoid the safety and unstable factors caused by the reduction of liquid level.
5. Intelligent mixing
At room temperature, without starting temperature control, the control system automatically closes the stirring motor, prolongs the service life of the equipment and reduces noise.
6. Double sensor overheating protection
Built-in hardware and software dual protection, using dual sensors to monitor the operation process.
Hardware overheating protection, completely separated from the main control system independent operation, overtemperature automatic power cut off, more safe and reliable.
7. Precision temperature control
8. Excellent stability and uniformity of temperature field
9. Multipoint calibration
Adopt multi-point calibration algorithm to realize built-in standard and precision temperature measurement.
10. Communication function
Support USB ã??WIFIã??WLANã?? serial communication function;
11. Curves show free scaling
Real-time curve display, support multi-touch, free scaling function;
12. Ergonomic design
13. Composite thermal insulation design
14. Oil pollution prevention design

Flow switch

Specifications
Efs series flow switch is an automatic element of protecting and controlling flow in the line of the system;
Medium: water, ethylene glycol and other liquid which is not classified as hazardous;
Liquid temperature:+5~-+120f¦;
Max. Working pressure: 1.0mpa;
The rate of the flow can be adjustable and it is stable.
Eflow switch can not be used where the liquid in the pipes will drop below the liquid's freezing point.

How are you?I am ShangRao LiTong electric co.,ltd sales manager,The company specifically manufactures all kinds of Pressurized thermostat apparatus and Liquid expansion thermostat-controlled apparatus.Our products include about 300 types of thermostatsmainly produce Ranco Series,Sagnomiya Series,Danfos Series,GE Series,car air-conditioner A series,Prodigy HEATER,ATEA and TAM Series,F2000,711 etc thermostat,Whice are widely used in refrigerator,air-conditioner,freezer,Potable water machine,Fries the ice machine,Maintains freshness the cabinet,heater,washer,fryer,electronic oven,car air-conditioner,

Ammeter ESS960I
Sold by YOYIK. Deyang YOYIK is a professional production, development, sale of power plant dedicated spare parts and accessories processing company. Through more than 21 years of efforts, the majority of customers have been fully recognized.

Yoyik can offer many spare parts for power plants as below:

#DF-Ammeter ESS960I-DF
PRINTED CIRCUIT BOARD IO PORT PCB JD10095
LVDT Sensor TDZ-1E-12B
oil pressure sensor gauge HC0622-24
Coal feeder integrator 6105
speed sensor QBJ-CS-1-L100
proximity sensor speed measurement CWY-DO-815003
Magnetic flap liquid level gauge UHZ-517
LVDT Sensor B151.36.09G09
Camera tube XJZ-40C
Conductivity probe 2401B-01
Dry Transformer ZSCB10-1600/10/0.5
Eddy Current Sensor PR6423/000-110
Speed Converter DF6202-005-080-03-00-01-00
Gap measuring Probe (with cable and air
hose) GJCT-15-E
resistance converter DTS125L-Pt100.3W.60 Pt100
Power DYB (B-TD00101B)
types of thermal couples TE-203
Fan LDC AFX-155023 H
Control circuit board APF7.820.117A-A
Vibration probe TM0793V
locator YT-2500 RDN 5201F
speed sensor CS-1H-D-080-05-00
Dual input series control power supply PSMC2-7-5-220V/240W
dual temp thermostat WSSX-411J
Speed sensor CS-1G-G-060-03-00
Metal Detector LJT-B
Relay PCL-735
Speed sensor CS-1G-D-075-05-01
micro fuse XRNP-7.2/2-50-1
Explosion-proof Limit Switch Box Topworx DXP-T21GNEB
proximity sensor pneumatic cylinder WT0180-A08-B00-C05-D10
displacement sensor price HL-6-50-15
HP expansion sensor CWY-DO-811101
LVDT Sensor K151.36.06.001
temperature controller for dry transformer BWR-04JJ(TH)
Excitation Regulator Power Supply Module 4NIC-FD360
Ammeter ESS960I

ZYR-DFYL-2025-1-20

Drum heater:

Through heating up the liquid in the barrel, the coagulation can be easy to take
Out, such as the adhesive agent in the barrel, bituminous, the grease, the pitch,
The paint, the paraffin wax, the oil and respectively resin raw materials. The size
Can be made as per your requirements.

Drum heater and pail heaters drum and pail heaters can provide practical,
Efficient means of freeze protection, viscosity control and maintenance of
Materials at elevated temperatures. Drum and pail heaters conduct heat
Through the drum wall to the product inside. Adjust the thermostat to
Automatically maintain the correct temperature. We have alll kinds of drum and
Pail heaters for various sizes, from 5-gallon drum and pail up to a 55-gallon
Drum and pail. Drum heaters can operate at higher temperatures and work faster
On metal drums. We also have more gentle drum heaters for your plastic and fiber
Drums.
Heating element in durm heater is laminated between two layers of 0.6mm
Fiberglass reinforced silicon rubber and has an adjustable thermostat that goes
From 50íp f to 410íp f (10íp c to 210íp c). Each heater band is equipped with a
Six-foot cord set (230 volt heater bands without a plug). A built-in metal
Screen is grounded electrically for safety. All heaters are high potential
Dielectric tested at 1500 volts at the factory. Drum heaters are available with
Either a 115 or 230 volt rating.
Drum and pail blanket heaters
Drum blanket heaters provide more efficient, more uniform heating with better
Temperature control. Rugged aluminized cloth has 1" of fiberglass insulation for
Less heat loss and increased worker safety. Provides outstanding freeze
Protection, as well as temperature and viscosity control. Velcro fasteners make
Installation easy for a single person.


Any

Thermostat

Detailed screw type bimetal thermostat description
1:auto reset
2:cremis shell
3.6.3*0.8 terminal
4:CQC UL VDE TUV SGS

Detailed brass screw bimetal thermostat description

fixation of the working temperaturing
reliable snap action
perdurable
less radio interference

Technical parameters:
Electrical parameters: 1)CQC,VDE,UL,CUL AC250V 50~60Hz 5A/10A/15A (Resistance load)
2)UL AC125V 50Hz 15A (Resistance load)
2.Action temperature range: 45~160 (Optional); temperature accuracy:
3.Recovery and action temperature difference: 8~100 (Optional)
4.Connection method: Insert the terminal 250# (bending angle: 0~90deg optional); Insert the terminal 187# (bending angle: 0~90deg optional; thickness: 0.5, 0.8mm optional)
5.Lifespan: over100,000 times
6.Electrical strength: No spark or breakdown for 1min at AC 50Hz 1800V
7.Contact resistance: less than 50m
8.Insulation resistance: less than100M
Junction method: Constant-closed: the contact point disconnects when temperature rises; and contact point connects when temperature falls;
Constant-opened: the contact point connects when temperature rises; and contact point disconnects when temperature falls.
10.Casing protective class: IP00
11.Grounding method: Connection is made between the metal casing of the temperature controller and the metal part of the grounding device.
12.Installation method: installed for KI031 series: general moving ring, mini round moving ring, flat moving ring general aluminum cover with mounting hole, extra length aluminum cover with mounting hole


Structure and application:
KI-32 serial products are the temperature controllers taking bimetallic strip as the temperature-sensing unit. In case of normal operation the electrical appliance, the bimetallic strip is in a free state; the contact point is in a state of close/open. When the temperature reaches the action temperature, the bimetallic strip performs quick action generates caused by internal stress due to heating; open/close the contact point; disconnect/connect the circuit; thus, the temperature is in control. When the electrical appliance is cooled to the recovery temperature, the contact point automatically opens/closes to recover normal operation state.
Widely used in electrical heating appliances like water dispenser, water heater, sandwich bread baker, dishwasher, dryer, sterilizing cupboard, micro-wave oven, electric heating coffee pot, electric cooker, refrigeratory, air-conditioner, laminator, heater of auto seat.


Characteristics:
Stable performance, high accuracy, small size, lightweight, high reliability, long lifespan, less interference to radio

Precautions:
1.When adopting contact temperature sensing installation, the surface of the metal cover is required to be securely contacted with the installing surface of the controlled device. For ensuring the temperature sensing effect, it is required to coat thermal conductive grease or other similar thermal conductive medium on the surface of temperature sensor.
2.For reliable performance, collapse, loose or distorted top part of the cover is prohibited during installation.
3.Liquid inleakage into the controller, crackle in the casing and unauthorized change of external terminal position are prohibited.
4.When the product is used in the circuit with maximum current of 5A, the cable with copper core at section 0. 5-1mm2 is required for connection; When the product is used in the circuit with maximum current of 10A, the cable with copper core at section 0.75-1.5 mm2 is required for connection;
5.The product should be kept in a clean, dry and corrosive gas-free warehouse with good ventilation and at relative humidity below 90%, environment temperature below 40.
Passed certifications :CQC UL VDE TUV SGS.



according to customers' requirements.

Thermostat
Detailed screw type bimetal thermostat description
1:auto rest
2:cremis shell
3.6.3*0.8 terminal
4:CQC UL VDE TUV SGS


Detailed brass screw bimetal thermostat description
fixation of the working temperaturing
reliable snap action
perdurable
less radio interference

Technical parameters:
Electrical parameters: 1)CQC,VDE,UL,CUL AC250V 50~60Hz 5A/10A/15A (Resistance load)
2)UL AC125V 50Hz 15A (Resistance load)
2.Action temperature range: 45~160 (Optional); temperature accuracy:
3.Recovery and action temperature difference: 8~100 (Optional)
4.Connection method: Insert the terminal 250 bending angle: 0~90deg optional); Insert the terminal 187(bending angle: 0~90deg optional; thickness: 0.5, 0.8mm optional)
5.Lifespan: over100,000 times
6.Electrical strength: No spark or breakdown for 1min at AC 50Hz 1800V
7.Contact resistance: less than 50m
8.Insulation resistance: less than100M
Junction method: Constant-closed: the contact point disconnects when temperature rises; and contact point connects when temperature falls
Constant-opened: the contact point connects when temperature rises; and contact point disconnects when temperature falls.
10.Casing protective class: IP00
11.Grounding method: Connection is made between the metal casing of the temperature controller and the metal part of the grounding device.
12.Installation method: installed for KI031 series: general moving ring, mini round moving ring, flat moving ring general aluminum cover with mounting hole, extra length aluminum cover with mounting hole


Structure and application:
KI-32 serial products are the temperature controllers taking bimetallic strip as the temperature-sensing unit. In case of normal operation the electrical appliance, the bimetallic strip is in a free state; the contact point is in a state of close/open. When the temperature reaches the action temperature, the bimetallic strip performs quick action generates caused by internal stress due to heating; open/close the contact point; disconnect/connect the circuit; thus, the temperature is in control. When the electrical appliance is cooled to the recovery temperature, the contact point automatically opens/closes to recover normal operation state.
Widely used in electrical heating appliances like water dispenser, water heater, sandwich bread baker, dishwasher, dryer, sterilizing cupboard, micro-wave oven, electric heating coffee pot, electric cooker, refrigeratory, air-conditioner, laminator, heater of auto seat.


Characteristics:
Stable performance, high accuracy, small size, lightweight, high reliability, long lifespan, less interference to radio

Precautions:
1.When adopting contact temperature sensing installation, the surface of the metal cover is required to be securely contacted with the installing surface of the controlled device. For ensuring the temperature sensing effect, it is required to coat thermal conductive grease or other similar thermal conductive medium on the surface of temperature sensor.
2.For reliable performance, collapse, loose or distorted top part of the cover is prohibited during installation.
3.Liquid inleakage into the controller, crackle in the casing and unauthorized change of external terminal position are prohibited.
4.When the product is used in the circuit with maximum current of 5A, the cable with copper core at section 0. 5-1mm2 is required for connection; When the product is used in the circuit with maximum current of 10A, the cable with copper core at section 0.75-1.5 mm2 is required for connection;
5.The product should be kept in a clean, dry and corrosive gas-free warehouse with good ventilation and at relative humidity below 90%, environment temperature below 40.
Passed certifications :CQC UL VDE TUV SGS.



according to customers' requirements.