Catenary Shot Blasting Machine

Catenary Type Shot Blasting Machine
Product Features:
Static loading and unloading workpiece,automatic rapid transport, it could realize that workpiece continuous pass-through shot blasting.(Q38 series ) and multi station point workpiece rotation shot blast (Q48 series)
High production efficiency,low cost
Compact structure,easy to operate
The product model is widely.It could be used in different production efficiency requirement and workpiece size.
Modularization design can be integrated into existing production line.It will realize machinery automatic production.
Production Application:
It mainly used for shot blasting and strengthen of mass production medium-small size casting,forging.
Q38,Q48 Series Catenary Type Shot Blasting Machine
ParameterUnitQ383/Q483Q385/Q485Q4810
Cleaning workpiece sizemm800 x12001000 x15
001000 x2500
Station No.//3/33
blasting wheel quantitykg669
blasting capacitykg/minx250x2506x250
blasting wheel powerkw6x156x156x15
the max loading weight of hangerkg3005001000
Productivity of every hookh30~6030~6040~60
cleaning room sizemm7680x2000 x29007680x2000 x29007680x2000x3800
total ventilation volumem/h170001900019000
total powerkw73.1573.15114.72

Introduction:
Catenary shot blasting machine for automobiles, tractors,
Motors and other small and medium-sized enterprises of casting and forging,
Sheet metal pieces to strengthen the surface and clean-up or treatment;
Also suitable for liquefied gas bottles clean up the surface rust transmission line,
The series of products with the continuity of good.

Roller conveyor shot blasting machine
for of steel sheets, sections, beam

Machine Introduction:

H beam shot blasting machine:
Shot blasting machine for h beam is designed and produced by adopting the advantages of similar products from both within the country and abroad. The rusting cleaning part (shot blasting) adopts high-efficient blast wheel and full shutter type shot sand separator. The sweeping machine adopts specially made high-strength nylon rolling brush and high-pressure ventilator. The preheating and drying part of shot blasting machine may adopt various heating methods. The paint spraying part adopts high-pressure airless spraying method. The complete set of equipment is controlled by PLC, and is the large-size complete equipment of international advanced.

QH69 shot blasting machine is mainly used for surface treatment (namely preheating, rust removal, paint spraying and drying) of steel plate and various structural sections, as well as for cleaning and strengthening of metal structural parts.

Hook shot blasting machine is widely used in foundry plant, forging plant.metal processing.
The double hook or Y track rail shot-blasting machines are the most versatile in terms of typical employment and size of the materials to be treated. Moreover the motorised hoists installed on the overhead conveyor allow the lifting of very high loads. The customer can choose the size and loading capacity of the machine according to the parts to be shot-blasted.
The hook type shot blasting machine is designed to increase the performance of the hook type machines by keeping the turbines continuously running.

The hook inside the blasting machine, once in position, starts to rotate on its axis and move back and forward in front of the turbines (mounted on one side of the machine). These combined movements ensure the complete shot-blasting of the parts external surface.

The customer can choose the size and loading capacity of the machine according to the parts to be shot-blasted.

Depending on the height of the machine, the installation may require a pit. The shot blasting unit is supplied complete with a self-cleaning dry cartridges dust collector.

Hanger hook shot blasting machine:
Hanger shot blasting machine is widely used in foundry plant, forging plant. Metal processing.
The double hanger or Y track rail shot-blasting machines are the most versatile in terms of typical employment and size of the materials to be treated. Moreover the motorised hoists installed on the overhead conveyor allow the lifting of very high loads. The customer can choose the size and loading capacity of the machine according to the parts to be shot-blasted.
The hanger type shot blasting machine is designed to increase the performance of the hook type machines by keeping the turbines continuously running.
The hanger inside the blasting machine, once in position, starts to rotate on its axis and move back and forward in front of the turbines (mounted on one side of the machine). These combined movements ensure the complete shot-blasting of the parts external surface.

The customer can choose the size and loading capacity of the machine according to the parts to be shot-blasted.

Depending on the height of the machine, the installation may require a pit. The shot blasting unit is supplied complete with a self-cleaning dry cartridges dust collector.

Applications:
Descaling of forged or heat treated parts
Desanding of ferrous and non-ferrous metal castings
Deburring of metallic and non-metallic parts
Deflashing of die cast parts
Contaminant removal

The tumbling action of the belt conveyor ensures that components are continually exposed to the blast stream and completely cleaned. For easy unloading, the belt conveyor is reversed, delivering the components into the loading skip or stillage.

Optimized shot blast effect:
During shot blasting, the workpieces, regardless of size and shape, are evenly and continuously tumbled. This is necessary for the effective and uniform treatment of all surfaces.
During tumbling, the workpieces continually undergo shot removal, enabling workpiece interiors and cavities to be perfectly cleaned
For the complete removal of all shot, the final tumbling time that follows the shot blast sequence can be regulated to suit the type of workpieces being blast cleaned
The tightly sealed, leak-proof blast chamber minimizes shot consumption.

The tumbling action of the belt conveyor ensures that components are continually exposed to the blast stream and completely cleaned. For easy unloading, the belt conveyor is reversed, delivering the components into the loading skip or stillage.

Optimized shot blast effect:
During shot blasting, the workpieces, regardless of size and shape, are evenly and continuously tumbled. This is necessary for the effective and uniform treatment of all surfaces.
During tumbling, the workpieces continually undergo shot removal, enabling workpiece interiors and cavities to be perfectly cleaned
For the complete removal of all shot, the final tumbling time that follows the shot blast sequence can be regulated to suit the type of workpieces being blast cleaned
The tightly sealed, leak-proof blast chamber minimizes shot consumption.

Automatic Wire Mesh Belt Shot Cleaning Machine/Sand Blasting/Shot Peening/Sandblasting/Sandblaster/Shot Blasting Machine Inroduction:
The Mesh Belt shot blast machines provide a frequency controlled speed variable mesh belt surface on which a variety of parts can be uniformly blasted. The high quality mesh belt ensures that the work piece remains in the perfect position to be blasted. As each part is blasted in a controlled fashion this technology is perfect for thin-walled parts which could be damaged when impacting other parts (for example inside a tumble blasting machine). Capable of fully automatic operation the MB-Line machines are the perfect shot blasters to improve the quality and consistency of your castings, forgings, or other small parts.

Automatic Wire Mesh Belt Shot Cleaning Machine/Sand Blasting/Shot Peening/Sandblasting/Sandblaster/Shot Blasting Machine Description:
1. Shot blasting is a method used to clean, strengthen (peen) or polish metal.
2. Shot blasting is used in almost every industry that uses metal, including aerospace, automotive, construction,foundry,
shipbuilding rail, and many others. There are two technologies used: wheel blasting or air blasting.

Product Advangate:

Automatic Wire Mesh Belt Shot Cleaning Machine/Sand Blasting/Shot Peening/Sandblasting/Sandblaster/Shot Blasting Machine Advantage:
1.Using full manganese steel body, use life is 20 years
2.Using advanced wet dust collector system
3.Using crushed shot secondary separation system
4.Using high performance P series impeller head (die steel CNC machining + vacuum heat treatment)
5.Steel Shot Flow Automatic Control System
6.Using 3 layers seal structure for machine body,without any Shot leaked
7.Steel Shot Automatic Recycle Fault Detection Alarm System

Automatic Wire Mesh Belt Shot Cleaning Machine/Sand Blasting/Shot Peening/Sandblasting/Sandblaster/Shot Blasting Machine Compared Advantage:
1.Environmental indicators reach the European standards
2.The efficiency is increased by 30%
3.Spare parts usage is reduced by 80%
4.Maintainability is increased by 90%
5.Automation degree increased by 50%
6.Integrated design, more convenient maintenance