JH602-100 Electro-optical Infrared (EO/IR) Camera
JH602-100 system is equipped with a high resolution LWIR uncooled thermal camera with 100mm lens, a day light camera and a 5Km laser range finder for detection, recognition, identification, aiming and ranging target at day and night, as well as provide real-time target azimuth, elevation, distance and video information. Built-in high accuracy gyro stabilization enables image stabilization while carrier attitude changes. Remote and Local operation is able to be switched flexibly according to practical application. Under remote operation mode, as a part of full defense system, it receiving target designation from mission computer and execute mission. Under local operation mode, it is used for navigation or monitoring.
Application
Applied to vehicle to search, observe, track and attack target with collimation control, navigation and early warning functions. It can also serve as assistant navigation and warning for the vehicle during the night.
Features
1. Multi-sensor integration (IR+TV+LRF)
2. Advanced tracking algorithm enables real-time tracking and memory tracking if target lost temporarily
3. 2-axis 2-gimbal mechanism, built in gyro-stabilization
4. Military standard components greatly improves system reliability
5. Super-strength aluminum alloy housing and fully sealed make sure system operation under any harsh environment
6. Modular design easy for repair and update
7. Friendly HMI for easy operation
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
Supplier: Thermal imaging cores, thermal or infrared cameras, thermal security cameras, electro optical sensors, electro optical sensor systems, electro optical surveillance systems, electro optical tracking systems, thermal batteries
Services: Manufacturer
Supplier: Battery grip, camera accessory
Supplier: Fruits, metals, gems, clothes, appliances, energy, safety systems, electronics, electricals, automotives, leds, herbs, cctv, solar panels, natural rubber, rubber products, all spices like cardamom, cloves ginger, nutmeg, turmeric cinnamon, coffee, tea
Supplier: Dibital camera battery, camcorder battery, cellular phone battery, pda battery, oem battery, odm battery
Supplier: PCB,Flex PCB,automotive FPC,Screen FPC,battery FPC,camera FPC,module FPC,antenna FPC ,keyboard FPC
Supplier: Rubber conveyor belt, tires, wheel, lithium battery
Supplier: Headway battery, liftpo4 pack, battery pack, battery cell, fiber optic cable, storage battery pack
Services:
Supplier: Digital Infrared Thermometers & Oximeter , Contact Less Temperature Measurement Equipment, Home Appliance Product .
Buyer: A) Plastic Raw Material : Pp / Hdpe / Abs
b) Bop Item : 1) Dc Motor 3.6 Volt 15000 Rpm, 2) Lithium Battery 3.6 V 5.4 Wh .
3) Egg Cooker Hetter With Pleat 350 / 360 watts . 4) Thermostats Khd 301 , 5) Charger 220 Volt To 4 Amp Out Put With 2 Meter Cable
