Seamless Tubes are important materials in making foundations in both offshore as well as onshore projects.
Seamless Tubes are easy to weld to form a desired structure. These Seamless Tubes are mainly composed of austenite and ferrite. The materials are very easy to get and have an excellent durable nature. The main applications of these kinds of Seamless Tubes are in the heat exchanger tubes that require a resistance to high temperature. These Seamless Tubes are also used in paper making machines and in the seawater handling systems.
The super duplex tubes are different in their material composition. This particular type is rich in both molybdenum and chromium. This gives a higher resistance against the corrosion. The alloying costs are less like the other duplex tubes. The fabrication and the management cost of these tubes are remarkably lesser than other tubes. These tubes protect the construction from the environmental erosion to give the structure an enhanced solidity.
We deals in the following products of India, China, Taiwan and Korea Origin:- 1)Hot Rolled Steel (Hot Rolled Sheets, Hot Rolled Coils, Hot Rolled Plates, Hot Rolled Bars etc) 2)Galvanized Steel (Galvanized Steel Tapes, Galvanized Steel Wires, Galvanized Steel Strips, Galvanized Steel Coils, Galvanized tubes etc) 3)Cold Rolled Steel (Cold Rolled Steel Strips, Cold Rolled Steel Coils, Cold Rolled Sheets etc) 4)Stainless Steel (Stainless Steel Strips, Stainless Steel Coils, Stainless Steel Wire, Hardened and Tempered Spring Steel, Stainless Spring Steel, Spring Steel Wires etc) 5)Steel Tube and Pipes ( ERW, CRW, CRS, Black, Galvanized, Stainless ) 6)Forged Column Clamps, Girder Clamps, Pressed Clamps, Rapid Clamps, Support Clamps & Wedge Clamps. 7)Heavy Duty Props & Light Duty Props. 8)Nuts, Bolts, Nails & Fastners 9)System Scaffolding, Base Plate & Adjustable Base. 10)Steel Tie Rod, Waller Plates and Wing Nuts. 11)Drop Forged and Pressed Sheet Metal Couplers of all types. 12)Steel Billets, Steel Angle & Steel Channels.
High Precision Steel Pipe for Gas spring Cylinder Type:Seamless and Welded Steel Tube Roughness 0.1-0.8ra Material E195-E235,Q195-Q235,#10,#20,#45,SAE1010,SAE1020 Surface:Black/bright Standard:DIN, GB, JIS, DIN 17175, DIN 2391, GB 5310-1995, GB/T 13793-1992, GB/T 3094-2000, GB/T 8163-1999, JIS G3101 Size :OD 3mm-140mm Thickness 0.5-20mm Processing :Cold rolled /cold drawn 1. BK (+C) No heat treatment after last cold forming process. 2. BKW (+LC) After last heat treatment there is a light finishing pass (cold drawing) 3. BKS (+SR) After the final cold forming process the tubes are stress relieve annealed. 4. GBK (+A) After the final cold forming process the tubes are annealed in a controlled atmosphere. 5. NBK (+N) After the final cold forming process the tubes are annealed above the upper Woven bag / wooden or crate carton/ Bundle Packing/ Plain end or vanished as per customer's request. Usage: Gas Spring Cylinder
Od:70-273mm Wt:6-30mm Length:fixed or randon length
Material - Alloy Steel Shape - Round Dimensions - 700-800mm Grade ASTM - A 335, GR. P1, P5, P9, P11, P12, P22, P91, ASTM A 213, T-11, T-5, T-22, T-9 Size Range - 1/2 - 26 Schedules - 20, 30, 40, Standard(STD), Extra Heavy (XH), 80, 100, 120, 140, 160, XXH
Cold Drawn Seamless Steel Pipe as implied is made by cold drawing a larger mother seamless pipe, which is generally manufactured through an HFS process. In the Cold Drawn Seamless process, the mother pipe is pulled through a die & plugin cold without any heating. Because of the tool on the outside and inside the surface and tolerances are better in Cold Drawn Seamless. While this is an additional process over HFS, it is necessary to get smaller size pipes that otherwise cannot be manufactured in HFS. Some applications which require close tolerances and smooth surfaces also specify the requirements to be necessarily Cold Drawn Seamless. Cold Drawn Seamless pipes & tubes are extensively used in Heat-Exchanger, Bearing & Automotive sectors. Cold drawn seamless steel pipe is used for the mechanical structure, hydraulic equipment, which has precision size, good surface finish. It can greatly reduce mechanical processing hours and improve material utilization, and improve the quality of products. High-quality cold-drawn seamless steel pipes are mainly using the 10# 20#. In addition, to ensure chemical composition and mechanical properties, it will check by the Hydrostatic test, crimping, flared, and Squashed test. Cold Drawn Seamless (CDS) as implied is made by cold drawing a larger mother seamless pipe, which is generally manufactured through an HFS process. In the CDS process, the mother pipe is pulled through a die & plugin cold without any heating. Because of the tool on the outside and inside the surface and tolerances are better in CDS. While this is an additional process over HFS, it is necessary to get smaller size pipes that otherwise cannot be manufactured in HFS. Some applications which require close tolerances and smooth surfaces also specify the requirements to be necessarily CDS. CDS pipes & tubes are extensively used in Heat-Exchanger, Bearing & Automotive sectors.
Features: 1) Keywords: seamless super austenitic stainless steel tube 2) Process method: cold drawn/cold rolled 3) Surface finish: annealing/pickling/manual polishing/ mechanical polishing 4) Material: 06cr17ni12mo2ti (gb), tp316ti, 1.4571, 316ti, s31635, x6crnimoti17-12-2 (en/iso/din), 08x17h13m3t (gost) 5) Standards: gb/t 14975, gb/t 14976, gb 13296, astm(asme) (sa)a312/213/269/m, gost 9941-81, din17456/17458, en10216-5, jis g3448/3459/3463 6) Size: A) nps: 1/8" to 8" B) Schedule: 5/5s, 10/10s, 20/20s, 40/40s, 80/80s Acc. To asme/ansi b36.19m or asme b36.10m C) O. D.: 9mm to 219mm D) W. T.: 0.5mm to 15mm 7) Length: max. 10 meters 8) Delivery conditions: (bright) annealed, pickled and polished 9) Inspection: iso 9001-2000, ped 97/23/ec, tuv 10) Applications: processing plant for sulphuric, phosphoric and acetic acids fluid and gas transportation; structure and machining; pulp and paper processing; components in gas scrubbing plants; seawater cooling equipment; oil refinery components; 11) Packing: seaworthy wooden cases/plywood box/steel framed cases/ simple packaging
1.Steel material: s355, q235, q345 2.Technology: erw, hot rolled 3.Thickness tolerance:+/-0.03mm 4.Length:as the customer's request 8.Inspections: various visual & dimensional inspections In steel belt or as the customer's request
1. OD:40*40-800*800mm 2. WT:4-40mm 3. Length:5.8-11.8m or as the customer's requirement 4. Standard: GB/T3054-2002,GB/T6728-2002,GB/T6725-2002,GB/T3094-2000,JIS G178-2005,JIS G3466,ASTM A500,DIN EN10210,ETC 5. Material:Q195-Q215,Q345,20#,alloy steel,ST37-2,ST42,ST52-3,S235,S355,A500,A106,A53,A36,ETC 6. Productive technology:cold drawn 7. Application:construction industry,steel structure work,shipbuilding,chemical machinery 8. Payment:L/C,T/T 9. Delivery time:15-30 days after receive the deposit 10. MOQ:10 MT 11. Packaging: painting, oil, packed by steel strip into bundles 12. Trade terms: FOB,CIF,CFR. Packaging: painting, oil, packed by steel strip into bundles.
STM A53/ASME SA53(A/B), ASTM A106/ASME SA106(A/B/C), ASTM A179/ASME SA179, ASTM A192/ASME SA192, ASTM A210/ASME SA210(A1/C), ASTM A333 ASME SA333(Gr.1/Gr.6), ASTM A213/ASME SA213(T11/ T12/ T22/ T5/ T23), ASTM A335/ASME SA335(P11/ P12/ P22/ P5/ P23), ASTM A335/ASME SA335, API 5L(B/ X42/ X52) , API 5CT (J55/ N80-1 for Tubing), EN 10216-2(P195GH, P235GH, P265GH, 16Mo3, 13CrMo45, 10CrMo910) EN 10216-1, EN 10216-3, EN 10255 S195T, EN 10297-1 E355, BS 3059 PI Gr320, BS 3059 PII(Gr360, Gr 440, Gr620-460, Gr622-490) DIN17175 (St35.8, St45.8, 15Mo3, 13CrMo44, 10CrMo910), DIN2440 St33.2, DIN1629/ DIN2448(St37.0, St44.0, St52.0) JIS G3445, JIS G3461,JIS G3462, JIS G3454. Package: bare packing/bundle packing/wooden carton packing Size range: Out diameter: 10.0-219.1mm Wall thickness: 1.0-35.0mm Max length: 24m.
