Honeywell 10006/2/1
Advantage Brands:
---Invensys Foxboro(FBM203,FBM204,FBM217,FMB231...)
---Invensys Triconex(3008,3625,3508E.3721,3700A 4351B...)
---Westinghouse:OVATIONN system, WDPF system, WESStation system card.
---Modicon: Quantum 140 Series processor, control card, Power module and so on.
---Rockwell Allen-Bradley: Reliance, SLC500/1747/1746, MicroLogix/1761/1763/1762/1766/1764, CompactLogix/1769/1768,Logix5000/1756/1789/1794/17 , 60/1788, PLC-5/1771/1785 and etc.
---Motorola: MVME162, MVME167, MVME1772 and MVME177 series.
---GE FANUC: Module, card, drive various kinds of spare parts,etc.
---Yaskawa: Servo controller, servo motor, servo driver, etc.
---Bosch Rexroth: Indramat, I/O module, PLC controller, drive module.
---Woodward: SPC valve position controller, PEAK15 digital controller.
---ABB: Advant OCS, ABB MOD 30/MODCELL, ABB MOD 300, ABB Procontic, ABB Procontrol
---Moore APACS, Moore Panel Controllers
---Siemens Iskamatic
ABBS2 DSMB127
ABBS2 DSDXB001
ABBS2 DSDX110
ABBS2 DSDO130
ABBS2 DSDI130
ABBS2 DSCA121
ABBS2 DSPA110
ABBS2 DSPC153
ABBS2 DSPC157
ABBS3 DSQC351
ABBS3 DSQC101
ABBS3 DSQC103
ABBS3 DSQC105
ABBS3 DSQC116
ABBS3 DSQC123B
ABBS3 DSQC129
ABBS3 DSQC115
ABBS3 DSQC142
ABBS3 DSQC200
ABBS3 DSQC202
ABBS3 DSQC208
ABBS3 DSQC208A
ABBS3 DSQC209
ABBS3 DSQC210
ABBS3 DSQC211
ABBS3 DSQC215
ABBS3 DSQC223
ABBS3 DSQC224
ABBS3 DSQC227
ABBS3 DSQC228
ABBS3 DSQC230
ABBS3 DSQC233
ABBS3 DSQC235A
ABBS3 DSQC235B
ABBS3 DSQC236A
ABBS3 DSQC236H
ABBS3 DSQC236K
ABBS3 DSQC238
ABBS3 DSQC239
ABBS3 DSQC241
ABBS3 DSQC243
ABBS3 DSQC248
ABBS3 DSQC249A
ABBS3 DSQC249B
ABBS3 DSQC252
ABBS3 DSQC253
ABBS3 DSQC254
ABBS3 DSQC255
ABBS3 DSQC257
ABBS3 DSQC259
ABBS3 DSQC266A
ABBS3 DSQC266B
ABBS3 DSQC266C
ABBS3 DSQC300
ABBS3 DSQC301
ABBS3 DSQC302
ABBS3 DSQC306
ABBS3 DSQC307
ABBS3 DSQC313
ABBS3 DSQC314A
ABBS3 DSQC314B
ABBS3 DSQC315
ABBS3 DSQC316
ABBS3 DSQC317
ABBS3 DSQC318
ABBS3 DSQC320
Supplier: Steel scrap, rails for rerolling, shredded 210/211, hms 1 and 2 80/20, hms 1, steel turning, tire wire
Supplier: 1. semiconductor / display material, part, equipment
2. electrical/electronic material, part, equipment
3. medical / biomaterial, equipment
4. machine metal part
5. chemical materials
6. power parts
7. car parts
8. cosmetic
9. consumer goods
Services: Consulting and advisory services:
offering expertise and support for businesses engaging in international trade, such as compliance with trade regulations, market entry strategies, and risk management.
Buyer: Material, parts and equipment
Supplier: 1. lighting products:
* indoor luminaires (including led bulb, led tube, led panel, led slim panel, led batten, led ceiling, led cross and linear light, led high bay, led parking, led downlight, led track light);
* outdoor luminaires (including led flood light, led solar flood light, led street light, led solar street light.)
* led grow lights (a variety of professional grow lights for dragon fruit, chrysanthemum, medicinal plants, ginseng, tomatoes, strawberries, grapes, watermelons, cantaloupe, bell peppers, orchids, vegetables, algae, etc.);
* fishing lights (including on boat lights and underwater lights);
2. kitchenware products: vacuum flask, water bottle, electric kettle; electric blender, rice cooker, glass liner and accessories.
Services: Manufacturing, export and import, transport, and odm/oem services for all of the products.
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
Supplier: 1 all types of lv power cables , telecommunication cables , special cables. 2 rod copper wire 8 mm 3 pvc compounds
CIRCULLATION FAN Air cooling fans are used for maintaining good air circulation and temperature in poultry farms. Our 36 air circulating fans can be used for various applications, like poultry farms, industrial buildings etc., and providing high efficiency. These fans are available in both single phase and three phase motor option. 1.Grills are plastic coated and thick diameter wire gauge (2.5mm) is used, and the gap is maintained 15mm as per international quality standards to avoid human accidents and rate entering into the fan. 2. The blades are made of compounded plastic so less chances of bending and hence less breaking chances. 3. Motor is efficient and complete thermal protection and moisture proof. 4. The CFM of fan 13000 and minimum airflow of 8.5 meters/sec. 5. Minimum positive air throws of 50ft. When we say 50 Length in practically. 6. Easy installation &Zero Maintenance
Application :- The XLPE (Cross Link Poly Ethylene) Power Cables are used under ground as well as over head transmission of power in power plants, industries, projects and all other electrical installations. Features :- Manufactured from bright annealed 99.97% pure bare copper & aluminum conductors. These cables are insulated with XLPE compound. Taped/Extruded inner sheath. Round steel wire / flat galvanised steel grip armoured. The outer sheaths can be PVC, HR PVC, FRLS or FR depending upon the application and requirement. Technical Advantage of XLPE Insulation :- Higher current rating, higher short circuit rating (approx 1.2 times that of PVC), thermosetting in nature, higher insulation resistance (1000 times more than PVC cables), higher moisture resistance, better resistance to surge currents, low dielectric losses, better resistance to chemicals and corrosion, longer service life. Comparatively higher cable operating temperature 90�°C and short circuit temperature 250�°C. Technical Data :- Working Voltage : Up to 1100 V Temperature Range : -15�°C to +90�°C Power Cable Sizes : 1.50 Sq. mm to 400.00 Sq. mm in 2, 3, 3 Copper Control Cable Sizes : 1.50 Sq. mm, 2.50 Sq. mm up to 24 cores. Color Codes : 2 Core Cables - Red, Black 3 Core Cables - Red, Yellow & Blue 3 Core Cables - Red, Yellow, Blue & Black (for Neutral) 4 Core Cables - Red, Yellow, Blue & Black 5 Core Cables - Red, Yellow, Blue, Black & Grey 6 Core Cables & above - Adjacent cores are blue for reference and yellow for direction in each lay Black outer sheath Specification : IS:7098 (Part-1) Packing : 500 / 1000 meters on drums
Application :- The Power Cables are used under ground as well as over head transmission of power in power plants, industries, projects and all other electrical installations. Features :- Manufactured from bright annealed 99.97% pure bare copper & aluminum conductors. These cables are insulated with PVC compound. Taped/Extruded inner sheath. Round steel wire / flat galvanised steel grip armoured. The inner & outer sheaths can be PVC, HR PVC, FRLS, HR-FRLS or FR depending upon the application and requirement. Technical Data :- Working Voltage : Up to 1100 V Temperature Range : -15�°C to +70�°C or +85�°C in HR PVC Power Cable Sizes : 1.50 Sq. mm to 400.00 Sq. mm in 2, 3, 3 & 4 core. Copper Control Cable Sizes : 1.50 Sq. mm, 2.50 Sq. mm up to 24 cores. Color Codes : 2 Core Cables - Red, Black 3 Core Cables - Red, Yellow & Blue 3 Core Cables - Red, Yellow, Blue & Black (for Neutral) 4 Core Cables - Red, Yellow, Blue & Black 5 Core Cables - Red, Yellow, Blue, Black & Grey 6 Core Cables & above - Adjacent cores are blue for reference and yellow for direction in each lay Black outer sheath Specification : IS:1554 (Part-1) Packing : 500 / 1000 meters on drums
- Solar Lawn lamps 5 W / 7 W; - Housing: Aluminum Alloy; - 5 V / 5 W / 8 W / solar panel ; - Ternary Lithium Battery 4.2 V / 4.4 Ah; - LED chip SMD 20 pcs / 30 pcs; - Light Size: OD 205 mm, H 170~340 mm, Flange: ID 110 mm; - Control Mode: Light Control; - charging time 6 to 8 hours, Lighting time 12 hours;