Brand : Rust-Oleum
Model Number : 265495
Size : 11 fl. oz.
Color : Clear
Type : Surface Protectors
Sub Type : Flat
Indoor/Outdoor Use : Outdoor
Details : Easy to use
Limited overspray
Multi-surface and multi-purpose use
For use on metal, aluminum, galvanized metal, PVC, concrete, masonry, asphalt roofing materials, vinyl siding, fiberglass and more
Rubberized utility coating designed to fill and seal leaks and cracks
Dry time to the touch in approximately 2 hours and cures after 24 hours
11 Oz.. can provides coverage can be up to 10 sq. ft. depending on the surface porosity
Rust and moisture resistant applies for superior protection from leaks and cracks
Withstands extreme temperatures and climates
Provides ultimate UV protection
Prevents water and moisture penetration for ultimate protection
Specifications 1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance Description It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc. Specification Data Solvent: Water Pigment: Non-lead pigment Theoretical Solids By Volume: more than 50% Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat Coverage varies considerably depending on application methods and surface roughness and porosity. Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places. Recommended Film Thickness: Wet: 80 micron Dry: 30 micron Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours Recoat : 2-3 hours Application: Brush, Roll, conventional spray or Airless Spray. Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water. Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%) Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%) Airless spray: do not thin Clean-up: Clean up equipment with water Typical painting system Substrate System All kinds of Wall surfaces 1.Alkali Resistance Primer (1 coat) 2.Emulsion Wall Paint (2 coats)
Supplier: Chemical, chemical raw material, auxiliaries, solvents, paint, coating, rubber, plastic, plasticizer, surfactant, additives, steel pipe, steel tube, stainless steel tube, stainless steel pipe, pipe fitting, flange, fasteners, steel wire, steel accessories
Services: Transportation agent,customs clearance service,
Buyer: Import chemical raw materials, auxiliaries, bulk commodities
DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.
BARILAC barrier coatings are the most suited sustainable solution to replace polycoated laminated board, waxcoated, PVDC coated etc all non sustainable alternatives. Barilac barrier coat is recommended for paper cup, trays, foodtrays, pizza boxes, ice cream cartons etc. The special product features are. - Low COBB - Good oil and grease resistance - Good Moisture Vapour Transmission rate - Good heat sealing performance - Good water resistance - Low odour - FDA compliance
RustOleum 1985830 Painters Touch 11Ounce Marking Spray Paint, White RustOleum Painter as Touch Multipurpose Paint Spray provides a smooth, durable finish that lasts longer than ordinary paints. Apply to wood, wicker, metal, plaster, masonry or unglazed ceramic. Fast dry formula resists chipping and fading. RustOleum 1985830 Painters Touch 11Ounce Marking Spray Paint, White Features. Adheres to gravel, soil, grass, concrete and blacktop Perfect for highlighting underground utilities, construction sites, road surfaces, athletic fields and more Durable enough to withstand general weathering Convenient spray through cap makes spraying easier and cleaner For use with or without RustOleum Marking Wand Solvent based White 11Ounce rosol spray. PRODUCT FEATURES : Brand : RustOleum Model Number : 1985830 Color : Marking White Type : Spray Paint Sube Type : Other Weight : 11 oz. Details : Convenient spray through cap For indoor and outdoor use Withstands general weathering Apply to grass, dirt, concrete, wood or metal Temporary adhesion
Give your project the rich, sunbaked glow of fired clay with RustOleum American Accents Terra Cotta Spray. Great for indoor projects. This easy to apply aerosol produces a finely textured finish that simulates the actual look and feel of clay earthenware. PRODUCT FEATURES : Brand : RustOleum Model Number : 7905830 Color : Clay Pot Type : Spray Paint Sube Type : Matte Weight : 12 oz. Details : Suitable for application to a variety of materials including wood, metal, masonry, glass, ceramics, plaster and clay, a clear top coat is recommended for outdoor use Fast drying oil based formula Textured matte finish, dries to the touch in 3 to 4 hours Covers an area of up to 12 sq. ft. One step spray application Indoor and outdoor use Quick easy look of textured sandstone Excellent durability and corrosion resistance Cleans up with mineral spirits
RustOleum Painter's Touch Ultra Cover 2X 12 oz. Satin Fossil General Purpose Spray Paint delivers twice the coverage as other competitive brands. Double Cover Technology provides ultimate hiding power and is a Paint and Primer in One allowing projects to be completed quickly. Product Features : Brand : RustOleum Model Number : 249084 Color : Satin Cinnamon Type : Spray Paint Sube Type : Satin Weight : 12 oz. Care Instructions : Use outdoors or in a well ventilated area such as an open garage. Remove all dirt, grease, oil, salt and chemical contaminants by washing the surface with a commercial detergent or other suitable cleaning method. All surfaces must be dry at time of application. Shake can vigorously for one minute after the mixing ball begins to rattle. Keep the can the same distance from the surface. Keep the can in motion while spraying. Apply two or more light coats a few minutes apart to avoid drips and runs. Do not use near open flame. Details : Interior/exterior use on wood, metal, plastic and more Designed to provide long lasting protection and durability Covers up to 50 sq. ft. Satin finish provides a low sheen look, creating a durable and protective surface Comfort spray tip with wider finger pad reduces finger fatigue and offers 360°, any angle spray technology Dries to the touch in 20 minutes Oil based formula contains breakthrough technology, delivers twice the coverage Paint and primer in one Designer & everyday colors suited to meet all consumer needs Twice the coverage, twice as fast Comfort Tip and Any Angle Spray technology Excellent indoor/outdoor durability Bonds to wood, metal, plastic and more Clean up with mineral spirits
Provides a non-reflective, ultra-flat finish for maximum hiding Applies to metal, wood, plaster or masonry Offers long-lasting protection when applied on top of primer Fast-drying and great for indoor or outdoor use Brand : Rust-Oleum Type : Spray Paint Color : Khaki Quantity : 6 units in one carton Size : 12 oz. per unit
Rust Remover (desoxydant)