fiberglass triangle shape supports beam, have better structure stability than T shape beam
fiberglass supports beamfiberglass supports beam
1-100mm, 120mm, 135mm high beams are available;
2-Easy to install;
3-Can be cut at any lengths you need;
4-Plastic beam bracket are available
Fiberglass support beam could withstand the highly corrosive environment of pig house(or poultry house) while also carrying big load bearing
Wood, steel and aluminum were the other materials considered in the design of a new support beam, however, none of those materials offered the strength or corrosive resistant that pig/poultry farm needed in their flooring system
Triangle fiberglass support beam specification list
Product
ART NO.
dimension(mm)
fiberglass beam
T100
100*32*5.5mm
T120A
120*32*5.5mm
T120A-01
120*32*5.5
T120A02
120*32*10
T120A03
120*32*10
T120B
120*30*5.5mm
T135
135*36.8*5.6mm
Fiberglass beam advantages:
A. High strength
FRP is stronger than structural steel on a pound-for pound basis. It has been used to buildings, walkway, sub-floors and platforms.
B. Light weight
FRP is 20-25% the weight of steel and 70% the weight of aluminum. FRP are easily transported, handled and lifted into place. Total structures can often be preassembled and shipped to the job site ready to installation.
C. Anti-corrosion
FRP will not rot and are impervious to a broad range of corrosive elements. This feature makes FRP a natural selection for indoor or outdoor structures in pulp and paper mills, chemical plants, water and sewage treatment plants, structural near salt water and other corrosive environments.
E. Dimensional stability
The coefficient of thermal expansion of FRP is slightly less than steel and significantly less than aluminum.
F. Aesthetics
FRP are pigmented throughout the thickness of the part and can be made to virtually any desired custom color. Special surfacing veils are also available to create special surface appearances such as wood grain, marble, granite, etc.
G. Long service life
H. Long maintenance-free life
I. Easy to transport and fabricate
Supplier: Frp high pressure pipe (gre pipe), grp pipe fiberglass-magnesium oxide board (fireproof board), j-mpf (melamine phenolic formaldehyde resin, foam) aluminum foil compound insulation board & air duct, fiber glass reinforced plastic pultruded products: pultruded grating, molded grating, guardrail and ladder, supporting frame, lighting pole, foot bridge, equipment safety fence, scaffold, trench cover, sidewalk, ground floor, s tair walkway , operation terrace, fiberglass reinforce plastic pultruded profiles: square tube, r ectangular tube, leg angles, channel, round rod, round tube, rectangular rod, plate, kick plate, t-shapes.Etc smc products: water tank, highway anti- dazzle board, smc table and chair of frp, automobile smc, door skin
H-BEAMS Specifically designed to offer load-bearing support, H-beams have a H-shaped cross section. These are often used as roof beams, or to provide structural support in industrial metal/steel fabrications
A beam is a structural element that primarily resists loads applied laterally to the beam's axis. Its mode of deflection is primarily by bending. The loads applied to the beam result in reaction forces at the beam's support points. For specification, price and other details please contact us.
A key component of roofing construction, purlins are horizontal steel beams used in roofing to support rafters or boards. Galvanized to prevent rusting. AVAILABLE IN 4 x2 x40 and 6 x 2x40 lengths.
FRP handrails can be used any type of typical handrail application for stair, platform / walkway or as guardrails. The typical FRP Handrail system uses FRP profiles as the pillar support body and is fixed together with a set of pipe connectors. There are certain common options available; it can also be customized as per user requirements. - Common options Square Tube guardrail - 50 mm square tube as top rail and post, 40 mm square tube as middle rail. Round Tube guardrail â?? 50 mm round tubes as top rail and post, 36 mm round tubes as middle rail. Combination of Square and Round tube guardrail is also possible. - Special FRP Fencing Fiber Glass gratings can also be used as fiberglass fencing system together with the pultruded profiles and fittings.
Gframe Tee-Grid suspension system consists of Main Tee and Cross Tee profiles, combined in an interlocking manner forming an exposed grid. The T-grid framing system is made to support our Gtiles and Ctiles. The main tees form the primary frame known as the main beams. Applications: Ceiling System Dimensions: 15 24
Supplier: Expanded metal, filter paper, fiberglass mesh, welded wire mesh, hexagonal wire mesh, chain link fence, gabion box, window screening, crimped wire mesh, stainless steel wire mesh, wire series and tomato support
Frp grating The leader of frp products in china. We are able to provide a complete line of grating products second to none, such as common molded and pultruded grating, molded phenolic grating, cover grating, conductive grating, mini-mesh grating, stair tread and cover, plate and accessories etc. In addition to fiberglass gratings , we can manufacture tubes, channels, i beam, stair nosing, pultruded "edgegrip", "marina decking", "slipgrip" with high quality and competitive price. Steel pallets and wooden pallets
Open size: 460x270x190cm Inside: 190t polyester pu 1500mm coated, high density light mesh fabric Outside: 190t polyester pu1500 coated Groundsheet: pe fabric Support: 12.5mm/9.5mm high intensity fiberglass pole Packing size: 80x20x20cm Open size: 460x270x190cm Weight: 9kg
