Ceramic random packings
Ceramic random packing including pall rings , saddle rings, ladder rings, rashing rings, cross rings, ceramic balls ect and column internals are widely used for chemical separation, purification and air pollution control.As an excellent manufacturer for the tower packings and internals, we would like to manufacture packings and internals according to your samples and specifications.
Ceramic saddle is improved from the arc saddle, ceramic saddle changes the both arched surface torectangular surface and makes the interior radius of curvature different, this construction overcomes the problem of nesting basically, ceramic saddle makes porosity distributed even and improves the distribution of the fluid, greater capacity and lower pressrue drop than rasching ring. Chemical analysis. SiO2 >73% Al2O3 17-25% Fe2O3
Has excellent acid resistance and heat resistance. It can resist to corrosion of various inorganic acids, organic acids and organic solvents except hydrofluoric acid, and can be used in high or low temperature conditions. Consequently the application range is very wide. The packing can be used in the drying columns, absorbing columns, cooling towers, scrubbing towers and actifier columns in chemical industry, metallurgy industry, coal gas industry, oxygen producing industry, etc. Chemical Analysis: Composition Value SiO2 >73% Al2O3 17-25% Fe2O3
Ceramic random tower packing has excellent acid resistance and heat resistance, which can stand upto corrosion of various inorganic acids, organic acids and organic solvents besides hf and can be used in high or low temperature, it can be used as drying, absorbing, cooling and regenerating tower packing in chemical, metallurgic, coal gas and air separation industry etc.
Supplier: Molecular sieve, activated molecular sieve powder, activated alumina, ceramic ball, alumina grinding ball, metal, plastic, ceramic random packing, structured packing
Services: Manufacturing, transportation, shipping
Supplier: Ceramic balls, catalyst, molecular sieves, ceramic and plastic random packings
Supplier: Activated alumina, ceramic ball, tower random packing and structured pack
Introduction Chemxin molecular sieve type 5a is an alkali alumino silicate; it is the calcium form of the type a crystal structure. Type 5a has an effective pore opening of 5 angstroms (0.5 nm). It will adsorb molecules with a kinetic diameter of less than 5 angstrom and exclude those larger. It is especially suitable for psa adsorber applications where it may be used for the separation of normal- and iso- paraffins (c4 to c6 species), in psa hydrogen purification and in oxygen concentrators. Regeneration Chemxin molecular sieve type 5a can be regenerated by either heating in the case of thermal swing processes; or by lowering the pressure in the case of pressure swing processes. To remove moisture from a 5a molecular sieve, a temperature of 250-300°c is required. A properly regenerated molecular sieve can give moisture dew points below -100°c, or mercaptan or co2 levels below 2 ppm. The outlet concentrations on a pressure swing process will depend on the gas present, and on the conditions of the process. Size 5a - zeolites are available in beads of 1-2 mm(10x18 mesh), 2-3 mm(8x12 mesh), 2.5-5 mm(4x8 mesh) and as powder, and in pellet 1.6mm, 3.2mm. Attention To avoid damp and pre-adsorption of organic before running, or must to be reactivated.
Introduction Chemxin molecular sieve type 5a is an alkali alumino silicate; it is the calcium form of the type a crystal structure. Type 5a has an effective pore opening of 5 angstroms (0.5 nm). It will adsorb molecules with a kinetic diameter of less than 5 angstrom and exclude those larger. It is especially suitable for psa adsorber applications where it may be used for the separation of normal- and iso- paraffins (c4 to c6 species), in psa hydrogen purification and in oxygen concentrators. Regeneration Chemxin molecular sieve type 5a can be regenerated by either heating in the case of thermal swing processes; or by lowering the pressure in the case of pressure swing processes. To remove moisture from a 5a molecular sieve, a temperature of 250-300°c is required. A properly regenerated molecular sieve can give moisture dew points below -100°c, or mercaptan or co2 levels below 2 ppm. The outlet concentrations on a pressure swing process will depend on the gas present, and on the conditions of the process. Size 5a - zeolites are available in beads of 1-2 mm(10x18 mesh), 2-3 mm(8x12 mesh), 2.5-5 mm(4x8 mesh) and as powder, and in pellet 1.6mm, 3.2mm.
JIAXING XUDONG INDUSTRY EQUIPMENT CO.,LTD was established in 2005, The basement is in Jiaxing City, Zhejiang ,China. nearby the international city---Shanghai, China. Our product list include tower packing , tower internals , flame arrestor core etc. With the development of the technology, Xudong industry start to produce high effective packing-experiment packing, and stepped into the best experiment packing suppliers in China market. For the technology and experience , we can offer the best solution for our customers. Thanks! Production line:
