Dual Passive Infrared Detector

Passive infrared detector Operating voltage:dc 9-16vstatic current:30ma operating temperature:-10 to +50 installation method:ceiling mountedinstallation height:approx 2.5-6mdirection identification:enter from outside: alarmexit from inside: without alarmdetection angle:15 detection range:diameter 6m / height:3.6malarm output:normal closeanti tamper switch:normal close size:102.5 *83*27mm

Wireless passive infrared detector Technical specificationoperating voltage:9v~16vdcstatic current: 50 a operating temperature:-10 to +50 installation:wall mountedtransmitting distance: 80m without obstructiontransmitting method:askdetection angle:110íp detection range:12*25malarm frequency:433.92m; 315manti tamper switch: n.C. In contacting point; N.O. Shows alarm. (green led on)size:104*60*32mm

Jdy-668 microwave & passive infrared detector Working voltagedc9~16v Working current25ma Working environment0¬~60¬ Alarm contactnc 28vd 80ma max Anti tamper contactnc 28vd 80ma max Alarm time optional5s10s or 30s Detection range12m Detection angle1100 Anti electromagnetic interference30v/m Anti light interference6500lux Installation height1.8~2.5m Dimension115 x 57 x 38mm Dimension115 x 57 x 38mm

2.0MP Sensor,Auto adjustable double filter Internal Infra Red with 850nm wave length Support no Light environment,TV-0UT Function£¬PAL/NTSC Internal Infra Red Detector,Timing Resistor Available Automatic recording ,10 seconds each Selective Board band @ 315/433MHZ.

Image Sensor - 1/3 INCH SONY SUPER HAD IT CCD Signal System - NTSC, PAL Total Pixels - 811(H)f+508(V) 795(H)f+596(V) Effective Pixels - 768(H)f+495(V) 752(H)f+583(V) Scanning System - NTSC standard 525lines PAL standard 625lines Sync Mode - Internal Resolution - 520TV Line Video Output - VBS1.0VP-P Composite / 75-+ S/N Ratio more than 50dB(AGC off) Min. Illumination - Under 0.000Lux for infrared Lighting condition Gamma - r=0.45 White Balance - Automatic White Balance Backlight Compensation Auto Lens - 4~9mm Varifocal Lens Shutter Speed - 1/60 ~ 1/100,000sec. 1/50 ~ 1/100,000sec. Operation Temperature - 14=ª~122=ª(-10f+~50f+) Humidity - Within 90% RH Power - DC12Vf+10% Dimension(Wf+Hf+D) - +¼120(W)mm f+ 175(H)mm 65 unites Infrared LED

Image Sensor - 1/3 INCH SONY SUPER HAD IT CCD Signal System - NTSC, PAL Total Pixels - 811(H)f+508(V) 795(H)f+596(V) Effective Pixels - 768(H)f+495(V) 752(H)f+583(V) Scanning System - NTSC standard 525lines PAL standard 625lines Sync Mode - Internal Resolution - 520TV Line Video Output - VBS1.0VP-P Composite / 75-+ S/N Ratio more than 50dB(AGC off) Min. Illumination - Under 0.000Lux for infrared Lighting condition Gamma - r=0.45 White Balance - Automatic White Balance Backlight Compensation Auto Lens - 4~9mm Varifocal Lens Shutter Speed - 1/60 ~ 1/100,000sec. 1/50 ~ 1/100,000sec. Operation Temperature - 14=?122=?-10f+~50f+) Humidity - Within 90% RH Power - DC12Vf+10% Dimension(Wf+Hf+D) - +?20(W)mm f+ 175(H)mm 65 unites Infrared LED

Manage Sensor - 1/3 INCH SONY SUPER HAD IT CCD Effective Pixels - 768(H)f+494(V) NTSC 752(H)f+582(V) PAL Scanning System - NTSC standard 525lines PAL standard 625line Sync Mode - Internal Resolution - 520TV Line(Color) / 600TV Line(B/W) Video Output - VBS1.0VP-P Composite / 75-+ S/N Ratio - more than 48dB(AGC off) Min. Illumination - Under 0.000Lux for infrared Lighting condition Gamma - r=0.45 White Balance - Automatic White Balance Backlight Compensation - Auto Lens DAY: F2.0, f=6mm(f=4mm, 12mm, 16mm option) NIGHT: F1.8, f=6mm(f=4mm, 12mm, 16mm option) Shutter Speed 1/60 ~ 1/100,000sec. 1/50 ~ 1/100,000sec. Operation Temperature 14=?122=?-10f+~50f+) Humidity Within 90% RH Power DC12Vf+10% Dimension(Wf+Hf+D) +?20(W)mm f+ 175(H)mm

CV-IRH2 H/R D/N Infrared Color Dual CCD Camera Special features: * use single dsp to support dual ccd ( b/w & color ccd sensor) * 2 different lenses for optional viewing angle * dual ccd design solves the focus problem * color at daytime. Automatically switched to b/w under low illuminations or at nightime. * vertical blanking interval switching. Systems will not exchange for temporary light variety * burst signal is switched off while shifting to b/w at nightime * built in 650nm filter to cutoff infrared wave * auto electronic shutter * high sensitivity * ac switching power

ZK5000 walk through metal detector mainly adopts infrared temperature measurement dot matrix sensor for accurate temperature measurement. If imported medical grade chips are used, the temperature difference can be controlled within 0.3 It is perfect for all establishments where safety and security is important such as workplaces, schools, banks, prisons, shopping malls, hospitals etc. Product Specification: Product- Infrared temperature walk through metal detector Certification- CE/FCC/ROHS Temperature accuracy- 0.3 Power consumption- 15W Temp. Detecting Range- 25 ~ 43 External Power- AC 110~240V, 50/60HZ Net Weight- 45KG Gross Weight- 52KG Working Environment- No direct sunlight, no wind Operating humidity- 99% non-condensing Inner Size- 1983 H 702 W 334 L mm Outline size- 2199 H 818 W 334 L mm Package Size- (2 cartons) 820*480*260mm (control unit) 2340*830*260mm(frame panel) The infrared temperature measurement and walk through metal detection security door are integrated. Before passing through the metal security door, the infrared human body temperature measurement work first, and the sound alarm is given to indicate the abnormal temperature, so as to effectively prevent the large-scale disease infection. It adopts the world's advanced electromagnetic compatibility design and anti vibration design, with ultra-high sensitivity, strong anti-interference ability and anti-seismic ability. Product Details: (1) The temperature measurement and metal detection functions are combined into one. (2) High precise body temperature detection and auto alarming, response time< 0.5s. (3) Safety temperature threshold with self-calibration (standard: 37.3 C, adjustable). (4) Safety Pass through (in & out) counting, auto alarming with sound and LED lights. (5) Light weight and strong anti-interference, stable performance. (6) Automatic self-calibration, pre-setting the alarm threshold, decrease manual operation and improve efficiency. (7) Plug and play with modular design parts, easy to install and troubleshoot. (8) Low rate of false alarm with cutting-edge digital signal processing technology. (9) One button operation to restore factory default settings. (10) International A-level measurement capability, stable working.