Nano Heat Insulation Steel-Al Composite Panel
1.With Spectrum Selective Reflecting Layer, it can reduce indoor temperature about 8~10 degrees centigrade;
2.With Nano PET material, the service life of the Nano PET is more than 10 years without peeling off and rusting;
3. With Oil Surface Polyurethane Layer, Anti-acid&Anti-alkali is well
Supplier: Aluminum flat rolled products, building sheets closure stock, fin stock, hot rolled plates, pattern sheets, cable wrap stock, cold rolled coils, flooring sheets/tread plates, lamp cap stock, pcb entry sheets/coils, circles, cold rolled sheets, foil stock, litho stock, spiral fin stock
Aluminum H-shaped steel is one of the most widely used non-ferrous structural materials in industry. It has been widely used in aviation, aerospace, automobile, machinery manufacturing, shipbuilding and chemical industry. With the rapid development of science and technology and industrial economy in recent years, the demand for aluminum tube and aluminum tube is increasing day by day. The production process of aluminum tube generally adopts the production process of ingot heating - extrusion - finishing. For aluminum alloy materials that can be strengthened by heat treatment, quenching and aging treatment should also be carried out. Hard alloy and high magnesium aluminum alloy pipes generally adopt the production process of cold rolling extruded tube billet first, and then stretching out finished products. Parameter Product Name Aluminum H-shaped steel Price range $1000-$2000 Discounts are available for large orders Minimum order quantity 1 ton Specifications Thickness 1-50mm, External diameter3-900mm,or according to requirements Standard ASTM, JIS, DIN, GB, Steel Grade ASTM B210/B241 JIS H4080 DIN 1725-1-1986 Test Chemical Component Analysis, Mechanical Properties, Technical Properties, Exterior Size Inspection, Hydro static Test, X-ray Test. Product certification ISO,SGS,BV,TUV, Processing Service Welding, Drilling, Cutting, Bending Surface treatment Mill finish, anodized, powder coated, electrophoresis, sand blasting, wood grain painting, matted, polishing bright etc. Packing Wooden pallet or according to customer's request Lead time 7 to 15 working days Payment terms T/T ,LC Exporting country Europe: Norway, Romania, Hungary, Austria South America: Chile, Argentina, Colombia, Venezuela , etc
5A06 H28 Angle aluminum belongs to the Al-Mg series alloy, which has a wide range of applications, especially the construction industry is inseparable from this alloy, and is the most promising alloy. Good corrosion resistance, excellent weldability, good cold workability, and medium strength. AL-MG series alloy is the most widely used anti-rust aluminum. This alloy has high strength, especially fatigue resistance: high plasticity and corrosion resistance, and cannot be strengthened by heat treatment. Plasticity in semi-cold work hardening Still good, low plasticity during cold work hardening, good corrosion resistance, good weldability, poor machinability, and can be polished. Mainly used for low-load parts that require high plasticity and good weldability, working in liquid or gaseous media, such as fuel tanks, gasoline or lubricating oil conduits, various liquid containers and other small-load parts made by deep drawing: The wire is used to make rivets. Alloy grade Silicon Si Iron Fe Copper Cu Manganese Mn Magnesium Mg Chromium Cr Zinc Zn Titanium Ti Zirconium Zr other Aluminum AL new grade old grade 0.40 0.40 0.10 0.5-0.8 5.8-6.8 0.20 0.02-0.10 each total 5A06 LF6 0.05 0.15 margi 5A06 H28 Angle aluminum belongs to the Al-Mg series alloy, which has a wide range of applications, especially the construction industry is inseparable from this alloy, and is the most promising alloy. Good corrosion resistance, excellent weldability, good cold workability, and medium strength. AL-MG series alloy is the most widely used anti-rust aluminum. This alloy has high strength, especially fatigue resistance: high plasticity and corrosion resistance, and cannot be strengthened by heat treatment. Plasticity in semi-cold work hardening Still good, low plasticity during cold work hardening, good corrosion resistance, good weldability, poor machinability, and can be polished. Mainly used for low-load parts that require high plasticity and good weldability, working in liquid or gaseous media, such as fuel tanks, gasoline or lubricating oil conduits, various liquid containers and other small-load parts made by deep drawing: The wire is used to make rivets. Alloy grade Silicon Si Iron Fe Copper Cu Manganese Mn Magnesium Mg Chromium Cr Zinc Zn Titanium Ti Zirconium Zr other Aluminum AL new grade old grade 0.40 0.40 0.10 0.5-0.8 5.8-6.8 0.20 0.02-0.10 each total 5A06 LF6 0.05 0.15 margi
Product:Aluminium Brand:Renaissance Pipe Fitting Inc. Sizes:Refer the specification Condition:New Rating:4.4, based on 65 reviews price:Start from 20 USD RFP India is India's leading manufacturer of aluminium, which are made from high standard quality hot rolled bars or plates. Our production proficiency comprises an absolute variety of aluminium butt weld fittings, aluminium pipe bends and aluminium seamless extruded pipes in accord with ANSI/ASME and DIN standards. At RFP, aluminium products are made up from rolled aluminium bars and plates, and not from cast aluminium, making it most appropriate for special applications. Aluminium is often supplied devoid of any surface treatment, for the reason that the aluminium oxide layer formed on the surface of it shows RFP India is India's leading manufacturer of aluminium, which are made from high standard quality hot rolled bars or plates. Our production proficiency comprises an absolute variety of aluminium butt weld fittings, aluminium pipe bends and aluminium seamless extruded pipes in accord with ANSI/ASME and DIN standards. At RFP, aluminium products are made up from rolled aluminium bars and plates, and not from cast aluminium, making it most appropriate for special applications. Aluminium is often supplied devoid of any surface treatment, for the reason that the aluminium oxide layer formed on the surface of it shows enough resistance to corrosion in usual atmosphere. Meanwhile, Aluminium elbows and bends are in general made up from 6000 series aluminium pipes that meet the needs for strength, anodizing and welding.
Supplier: Aluminum composite panels , acp, polycarbonate sheets , ppal coils, color coated aluminum coils, pre painted aluminum coils, adhesive films, protective films
Supplier: Aluminum sheet, aluminum panel, composite panel, sandwich panel, stainless steel, metal parts, noise barrier material, plastic parts, screw, other accessory parts for building and industries
Services: Sourcing service and quality audit service
Aluminum honeycomb panel can be used for partition, wall.
Punch hole, any surface treatment, rockwool between aluminum sheet.
Custom-made, any size and profile, any surface treatment.
