Introduction:
Hebei Yida Anti Impact Rebar Coupling system is a mechanical rebar splicing system, be made of high quality alloy steel. It has already passed the High Speed Tensile test of Anti instant impact by Germany Berlin BAM Laboratory. It has been widely applied at the sites where required high level of resistance to impact. The coupler sleeve will be perfect connected with rebar by cold swaged deformation in the application, and dual couplers will be connected by a high strength bolt.Its size can be from 12mm into 40mm different diameter bars.
Special Advantages:
(1)Each rebar is connected by cold swaged with a coupling, It was processed by large-tonnage hydraulic machine and unique split mould to ensure high quality and reliable radial deformation swage.
(2)Rebar sleeve bond press is done prior to site connection saving precious site time.
(3)The two sleeves are connected through a high-strength bolt, quality ensured.
(4)Installation on site is easy and fast, even in dense cages. No X-ray check is needed and installation can be done in any weather conditions.
(5)No thread cutting, no need heat or pre-heat on rebar, hence the rebar retains its original characteristics after splice.
(6)The Yida ACJ rebar coupling system stands complex or full tension as well as full compression state.
Application Guide:
Proper installation is very important to ensure the design load will be reached in the application. Yida strongly recommends that the installation and site quality check be done according to the required guidelines and dimensions.
Advantages: Bar-break feature guarantees fully ductile elongation. No reduction of the bar cross-section area. Material of the rebar coupler is No.45 steel. Working principle: 1,First,We use GQ50 rebar cutting machine to splice up the end of rebar. 2,Secondly,we use Upset Forging Parallel Thread Machine (BDC-Auto1 Machine) to forge the end of rebar. 3.Third, we use Parallel Thread Cutting Machine (LW-I500 Machine) to thread the ends of the rebar which have been forged. 4.Fourth,an upsetting coupler is used to link the two ends of rebar in parallel thread.
Product Name : Dehydrated Red Onion Chopped HS Code : 07122000 Category : White, Pink, Red Packaging Options : 20/25 Kgs PP Bag/Cartoon Box or Customized Loading Option : 14 MTS (20 FT), 24 MTS (40FT) Aroma : sweet and spicy Size : 3 to 5 mm / 5 to 7 mm Product Expiry 2 Years in 5 C - 12 C Storage at Dry Place Source / Origin : India The premium quality of this dehydrated red onion chopped and dehydrated pink onion pieces make an everlasting impact on your dish and also, on the devourer' s mind. PHYSICAL ANALYSIS Appearance : Red Size : 3 to 5 mm / 5 to 7 mm Texture : Chopped Taste/Flavour : Characteristic aroma, fragrant and pungent CHEMICAL ANALYSIS Moisture Content : 8.0 % Max Total Ash on dry basis : 5.0 % Max Ash Insoluble in dil HCL : 0.5 % Max Peroxide : Negative MICROBIOLOGICAL ANALYSIS Total Viable Count (CFU/g) :
Product Name : Dehydrated Pink Onion Chopped HS Code : 07122000 Category : White, Pink, Red Packaging Options : 20/25 Kgs PP Bag/Cartoon Box or Customized Loading Option : 14 MTS (20 FT), 24 MTS (40FT) Aroma ; sweet and spicy Size : 3 to 5 mm / 5 to 7 mm Product Expiry 2 Years in 5C - 12C Storage at Dry Place Source / Origin : India The premium quality of this dehydrated red onion chopped and dehydrated pink onion pieces make an everlasting impact on your dish and also, on the devourer's mind. PHYSICAL ANALYSIS Appearance : Pink Size : 3 to 5 mm / 5 to 7 mm Texture : Chopped Taste/Flavour : Characteristic aroma, fragrant and pungent CHEMICAL ANALYSIS Moisture Content ; 8.0 % Max Total Ash on dry basis : 5.0 % Max Ash Insoluble in dil HCL : 0.5 % Max Peroxide : Negative MICROBIOLOGICAL ANALYSIS Total Viable Count (CFU/g) :
Introduction Hebei Yida Anti Impact Rebar Coupling system is a mechanical rebar splicing system, be made of high quality alloy steel. It has already passed the High Speed Tensile test of Anti instant impact by Germany Berlin BAM Laboratory. It has been widely applied at the sites where required high level of resistance to impact. The coupler sleeve will be perfect connected with rebar by cold swaged deformation in the application, and dual couplers will be connected by a high strength bolt.Its size can be from 12mm into 40mm different diameter bars. Special Advantages: (1)Each rebar is connected by cold swaged with a coupling, It was processed by large-tonnage hydraulic machine and unique split mould to ensure high quality and reliable radial deformation swage. (2)Rebar sleeve bond press is done prior to site connection saving precious site time. (3)The two sleeves are connected through a high-strength bolt, quality ensured. (4)Installation on site is easy and fast, even in dense cages. No X-ray check is needed and installation can be done in any weather conditions. (5)No thread cutting, no need heat or pre-heat on rebar, hence the rebar retains its original characteristics after splice. (6)The Yida ACJ rebar coupling system stands complex or full tension as well as full compression state. Application Guide: Proper installation is very important to ensure the design load will be reached in the application. Yida strongly recommends that the installation and site quality check be done according to the required guidelines and dimensions. Site installation method Step 1:Screw the bolt into female coupler swaged with rebar, till unable to screw continually. Step 2:Screw another side of bolt into the other sleeve after swaged with rebar, till unable to screw continually. Step 3:With help of two pipe wrench, tighten the connection by turning both rebar / couplers in opposite direction at the same time.
Hebei yida anti impact rebar coupling system is a mechanical rebar splicing system, be made of high quality alloy steel. It has already passed the high speed tensile test of anti instant impact by germany berlin bam laboratory. It has been widely applied at the sites where required high level of resistance to impact. The coupler sleeve will be perfect connected with rebar by cold swaged deformation in the application, and dual couplers will be connected by a high strength bolt.Its size can be from 12mm into 40mm different diameter bars. Special advantages: (1)each rebar is connected by cold swaged with a coupling, it was processed by large-tonnage hydraulic machine and unique split mould to ensure high quality and reliable radial deformation swage. (2)rebar sleeve bond press is done prior to site connection saving precious site time. (3)the two sleeves are connected through a high-strength bolt, quality ensured. (4)installation on site is easy and fast, even in dense cages. No x-ray check is needed and installation can be done in any weather conditions. (5)no thread cutting, no need heat or pre-heat on rebar, hence the rebar retains its original characteristics after splice. (6)the yida acj rebar coupling system stands complex or full tension as well as full compression state. Application guide: Proper installation is very important to ensure the design load will be reached in the application. Yida strongly recommends that the installation and site quality check be done according to the required guidelines and dimensions. Site installation method Step 1:screw the bolt into female coupler swaged with rebar, till unable to screw continually. Step 2:screw another side of bolt into the other sleeve after swaged with rebar, till unable to screw continually. Step 3:with help of two pipe wrench, tighten the connection by turning both rebar / couplers in opposite direction at the same time. -
Application Guide: Proper installation is very important to ensure the design load will be reached in the application. Yida strongly recommends that the installation and site quality check be done according to the required guidelines and dimensions. Site installation method Step 1:Screw the bolt into female coupler swaged with rebar, till unable to screw continually. Step 2:Screw another side of bolt into the other sleeve after swaged with rebar, till unable to screw continually. Step 3:With help of two pipe wrench, tighten the connection by turning both rebar / couplers in opposite direction at the same time.
1. Chopped basalt fiber Basalt fiber is a kind of inorganic fiber material. Chopped basalt fiber is an inorganic mineral fiber with a length of less than 50mm and can be evenly dispersed in cement concrete. 2. Characteristics of chopped basalt fibers (1) The naturalness of raw materials. Because the raw material for producing continuous basalt fiber depends on the natural volcanic extrusive rock, there are no ingredients harmful to human health except that it is inherently high in chemical stability and thermal stability. (2) Comprehensive performance. Basalt fiber is acid resistant and alkali resistant. It is both low temperature and high temperature resistant. It is insulated and insulated by heat and electricity. Its tensile strength is higher than that of large tow carbon fiber. Its elongation at break is even better than that of small tow carbon fibers. It has high compressive strength, shear strength and adaptability to aging, and has good comprehensive properties in harsh environment. (3) Low cost. The price of basalt fiber used in cement concrete is significantly lower than that of steel fiber and polyester fiber. (4) Natural compatibility. Basalt fiber is a typical silicate fiber, which is easy to disperse when mixed with asphalt concrete, cement concrete and mortar. The newly mixed basalt fiber concrete has stable volume, good workability and durability, and has superior high temperature resistance, anti-seepage, crack resistance and impact resistance.
Feature products Rebar coupler is used to connect the two rebar ends in the construction work. Product description Rebar coupler is used to connect the two rebar ends in the construction work. 1. Easy operation, saving time and rebar material. The rebar coupler producing and rebar end threading will not be affected by the weather; it can be processed before processing. 2. It can connect the rebar with the diameter 16mm to 40mm. 3. Use no.45 steel, with the thickness and length of the rebar coupler, the connecting part has higher tensile strength than the rebar part Rebar coupler: 1. Rebar coupler type:paralleled type, left hand type, right hand type, right and left hand type and reducing type. 2.Range of application:suitable for rebar of hrb335 and hrb400.Diameter from14mm to 50mm. 3.Connection method:mechanical splicing.Can connect same diameter and different diameter of rebar. Product description Rebar coupler is used to connect the two rebarends in the construction work. 1. Easy operation, saving time and rebarmaterial. The rebar coupler producing and rebar end threading will not beaffected by the weather; it can be processed before processing. 2. It can connect the rebar with the diameter 16mm to 40mm. 3. Use no.45 steel, with the thickness andlength of the rebar coupler, the connecting part has higher tensile strengththan the rebar part Fit for shipping
Fabric Roof:500g/m�² PVC UV Waterproof Sidewall:380g/m�² PVC UV Waterproof PVC church window Frame Pole: 38x1.0mm Connector:42x1.2mm Ground frame + reinforcement bar Anti rusted galvanized pipe or powder coated steel pipe Size Width:6.0m Length:12m Sideheight : 2m Center height :3.05m Ground area: 72sqm
