Holes and Notches
Hole and notch always used for tempered glass,laminated glass,acid etched glass and so on. In some cases, we will consider hole and notch locations and size according to your drawings. Pls kindly see below details:
Minimum Glass Width: The minimum width of the product should be 8 times the thickness of the glass.
Edge of glass to nearest point of hole: Glass less than 1/2" thick should not have holes located any closer than 1.5 times the thickness of the glass. Glass thicker than 1/2" should not have holes located any closer than 2 times the thickness of the glass.
Corner of glass to nearest point of hole: Holes should not be located any closer than 6.5 times the thickness of the glass.
Dimension of holes: The minimum dimension of a hole should be at least 1/16" larger than the thickness of the glass. The maximum dimension of the hole should not be more than 1/3 the narrowest dimension of the piece.
Notches and cutouts: All must have a fillet with radius equal to, or greater than the thickness of the glass.
Features: Our Q35Y Series Iron worker are mainly used for cutting flat bar, profile, punching hole and notching. It can widely used in Shipyard, Electric, Bridge, Automobile, Hoisting & Transportation, Metal Construction and other machinery factories etc. It can Flat bar cutting, profile cutting, punching hole and notching work can be performed on the machine within the rated specification. With extra equipment, the machine is able to cut, punch and bend in special shape. The machine is adopted hydraulic driving system and it has a perfect structure, with light weight and low noise, stable performance and overload protecting device. Technical data: Model Q35Y-16 Q35Y-20 Q35Y-25 Q35Y-30 Pressure(Ton) 66 75 110 140 Max.cutting thickness(mm) 16 20 25 30 Plate strength(N/mm2) ¡Ü450 ¡Ü450 ¡Ü450 ¡Ü450 Cutting angle(degree) 7¡ã 8¡ã 8¡ã 8¡ã Sheraing size of one stroke(mm) 16*250 8*400 20*330 10*480 25*330 16*600 30*355 20*600 Ram stroks(mm) 80 80 80 80 Number of strokes(cpm) 8 8 6 6 Throat depth(mm) 300 355 400 600 Punching thickness(mm) 16 20 25 26 Max.Punching diameter(mm) 25 30 35 38 Power of main motor(kw) 4 5.5 7.5 11 Overall dimensions(L*W*H)mm 1640*730*1770 1860*800*1900 2355*960*2090 2680*1040*2300 Weight of machine(kg) 1600 2000 4800 6800 A Special order for the joist and channel moulds needed. Profile Round Bar Square Bar Equal Angle T-Bar joistq Channel 90¡ãShearing 45¡ãShearing 90¡ãShearing 45¡ãShearing Q35-16 45 40*40 125*125*12 100*100*10 125*125*12 100*100*10 180*94*6.5 180*68*7 Q35Y-16 45 40*40 125*125*12 50*50*5 120*120*12 60*60*8 126*74*5 126*53*5.5 Q35Y-20 50 50*50 140*140*12 50*50*5 140*140*12 70*70*10 160*86*6 160*60*6.5 Q35Y-25 60 50*50 160*160*14 50*50*5 160*160*14 80*80*10 200*102*9 210*75*9 Q35Y-30 65 55*55 180*180*16 60*60*6 180*180*16 80*80*10 280*124*10.5 280*86*11.5. Overall dimensions(L*W*H)mm 1640*730*1770 Weight of machine(kg) 1600.
Tempered polish edge 10 mm Glass with countersunk holes holes notch cut out
Standardized, modular, adjustable system of punching and notching tools. Good for multiple hole punching. Tools for corner notch, louver, corner radius, laminations, strip cutting. Tools for angles, channels and extruded sections. Punching sizes and distances adjustable.
boxable with triple hole, flange cut, dimple hole, bolt hole, service hole, lip cut, web notch 7 punches high precision and high speed zero waste end material Beckoff plc system
In nowadays, compared with the concrete balustrade, the glass balustrade is much more attractive, because except to make sure the human safety, it can help you enjoy the scenery easily through the transparent glass. What's more, the balustrade glass could be variety of colors and designs, which make the glass balustrade become one of the wonderful decoration elements for the constructions. As per our experience over 20years, the most popular glass for balustrade is 6mm 8mm 10mm 12mm 15mm 19mm toughened glass, and 4+4mm 5+5mm 6+6mm 8+8mm 10+10mm 12+12mm laminated glass, the glass could be flat or curve, could be colorless or colorful, could be acid etched or screen printing, etc., could 100% meet your customized requirements.Any edges could be done perfectly, like flat polished edge (T edge), pencil edge (C edge), beveled edge, ogee edge, matt edge, corner round edge. Holes and notches Tempered glass can be supplied with drilled holes (no matter straight or conical) and cut notches. We will consider hole and notch locations and size according to your drawings On the balustrade glass, any special processing could be done perfectly, such as: Trapezoidal shape glass panels for stair handrail Precise holes or cutouts for fittings installation Flat polished edges to avoid human hurt by the sharp edges Round safety corners to avoid defects during transportation or installation Many others. Specification Size: Maximum 3000*8000mm, Minimum 150*300mm Thickness: 3mm 4mm 5mm 6mm 8mm 10mm 12mm 15mm 19mm Color: clear, ultra clear, green, blue, grey, bronze, etc. Type: Clear, Tinted, Reflective, Low Iron, Etched, Textured, color painted, pattern screen printing, Colorsmart, Thermocolour and Low E glass, etc. Processing: All the processing like beveling, cutting, drilling, etc. must be done before tempering. Application Glass Balustrades Glass skylight Glass canopy Shower Screens Glass shelves Glass Doors And Windows Frameless Entry And Balustrading
About Clear Tempered Glass Clear tempered glass, also toughened glass, hardened glass, reinforced glass, ESG glass, impact resistant glass, is fabricated by heating� clear float glass to over 600�°C and cooling it rapidly, which locks the outer surfaces of the glass in a state of high compression, and the core or center of the glass in compensating tension. It is a safety glass which is used when strength, thermal resistance and safety are important considerations. Clear Tempered Glass Characteristic High Strength The tempered glass performs well in resisting bending and hitting owing to its high strength which is 3-5times that of normal float glass. It is able to withstand a surface pressure of 95Mpa. High Safety When the tempered glass is broken, it turns into alveolate granules with obtuse angles, which guarantee safety to make sure human harmless, and the toughening process greatly reduces the risk of thermal breakage to ensure less loss. Heat Stability The tempered glass is capable of withstanding a temperature change of 250 to 320 while normal annealed glass can only bear 20 to 100 Clear Tempered Glass Specification Available size: Maximum 3000*8000 mm, Minimum 150*300 mm, any customized size. Beveling edges, cutting notches, drilling holes, grinding corners, etc. all could be done, but must be done before tempering. Edge work Any edges could be done perfectly on clear toughened glass, like flat polished edge (T edge), pencil edge (C edge), beveled edge, ogee edge, matt edge, corner round edge. Holes and notches Tempered glass can be supplied with drilled holes (no matter straight or conical) and cut notches. We will consider hole and notch locations and size according to your drawings. Clear Tempered Glass Application â?¢ Used in interior like bathroom glass shelves, glass partition walls, etc. Used in exterior like window glass, greenhouse glass, etc. Used on furniture like table top glass, cabinet door glass, etc. Many Others.
Type: Stand Up Zipper Pouch Material: Customized. Laminated/Plastic/Paper Material all available Size: Customized size Thickness: Customers Demands Printing: Up to 11 colors Punching: Round hole, plane hole, triangle hole, butterfly hole, hoof hole, elliptical hole. Logo: Accept Customized Feature: Food Grade, High Barrier, Moisture Proof, Strong Sealing, Perfect Printing Other custom: Valve / tear notch / hole / label / foil inside / shape etc Use: Food Packaging
Machinery to make cores for transformer 1. Wound Core Cutting Machine 2. Swivel Shear (Core Cut-to-Length Machine) 3. Fix Shear (Core Cut-to-Length Machine) 4. Notching and Hole Punching Machine 5. Coil Winding Machine 6. Foil/Strip Transformer Winding Machine Export Wooden Packing
As a manufacturer we are manufacturing many types of Shoe Hooks including custom designed Hooks. We use variety of material in our manufacturing process such as Steel, Brass, Aluminum etc. We are equipped to produce special and fabricated hooks and perform such operations as hole punching, forming, offsetting, notching, countersinking, finishing and plating. For more information simply fill in our quick quote form below and we will be in touch to guide you with our expert advice.