Combitherm Ultra Boilers

Combitherm Boiler is a unique design membrane water wall type boiler which combines the advantages of water tube & smoke tube designs. The radiation zone of the furnace is covered on three sides by water tubes forming the first pass and the conventional smoke tube shell has tubes lined up forming the second and third pass of flue gases. Thus, the water wall furnace recovers the radiation heat of the furnace and the smoke tube shell provides large water & steam holding capacities to give the maximum advantage.

Supplier: Ultra wall-hung boiler (combi), pass steam boiler, compact steam boiler, liquid and gas fuel operated counter presserrised hot water boilers, solid fuel operated hot water boilers, solid fuel/automatic feeding hot water boilers, panel radiator, gaz burners, solid fuel operated, automatically & manually feed residantial type hot water boilers, hot air generators, full automatic/with front furnaces solid fuel fired systems, lpg containers, liquid fuel containers, single and double jacket water heaters

Supplier: Sea water desalination system, filtration plants, reverse osmosis systems, clarifiers systems, filtration plant, ultra filtration systems, softening plants, demineralisation systems, effluent treatment systems, sewage treatment systems, pharma ro systems, dm plant, ro plant, nano filtration systems, minaral water plants, package drinking water systems, water treatment plant, mix bed dm plant, boiler feed water treatment, ion exchange plants, swimming pool filtration plants, pressure buster systems, iron removal systems, edi units, desalination system.

With the support of our multi-talented professionals, we have established ourselves as a leading manufacturer, exporter and supplier of quality-assured steam boiler. We manufactured these offered range of products keeping in mind the varied requirements of different industries. In this regard, we use ultra-grade metal and other required raw material. Adding to that, before finally approving these boilers, they are tested according to different quality parameters set by the industry. Feature: Easy maintenance Cost effective Smooth finish High efficiency Convenient outlets Specification: Material used: mild steel, stainless steel Pressure: high pressure Fuel: electricity

1.RO Introduction The reverse osmosis membrane as its name suggests has the opposite direction with the nature permeation, it is a kind of advanced and energy efficiency technology, the work principle is to separate the water and the impurities like ions and germs through the semi-permeable membrane under the pressure greater than permeation pressure. The RO membrane is a kind of semi-permeable membrane and made of polymers via special process. 2.RO Application a)Chemical materials and concentrated liquid recycling; b)Pure water or ultra-pure water productions for industries, medicine and food ; c)Desalination of brackish water and sea water; d)The desalination pre-treatment for boiler makeup water at power plants, thermal power plants and mining enterprises; e)Water for cleaning in pharmacy, electroplate and electronic equipments

This is the the most representative plasma cutting machine of Boda, which is the crystallization of past 20 years experience and technology development. The X,K Y V type of groove are realized as well as small hole cutting to the quality of close to laser cut. https://boda-steelcutting.cn/9389.html Small hole cutting method and principle Fine Plasma small hole cutting refers to the use of fine Plasma to cut small round holes with a diameter-to-thickness ratio of 1:1 on low-carbon steel plates with a thickness range from 5-25mm. It can replace drilling within a certain range and reduce cold processing and procedures. Compare to laser cutting, effectively reduce the procurement cost of laser cutting machines. Fine Plasma small hole cutting is actually an extension of the flat cutting function. It adopts high-speed and high-precision gantry CNC machine tools, fine Plasma cutting power supply, high-performance multi-axis CNC system, and automatically controls the gas flow, improves the arc beam stiffness, and reduces the cutting taper, to achieve a better round hole cutting effect. Product advantages Modular design, Double-sided beams, imported linear guides, and L-shaped over-positioning technology ensure the highest accuracy of the machine tool; the ultra-wide movable body (400mm) ensures the stable operation of the machine tool. This prduct has won the national High-tech product certification certificate, representing the leading level of China's cutting industry! The specially designed vertical and horizontal direction adopts linear guide rails (optional), which makes the plane cutting machine the ultimate, and the accuracy is comparable to or surpassing our international competitors. Application scope and purpose Widely used in high-precision cutting and processing of metal parts in industries such as automobiles, agricultural machinery, grain machinery, engineering machinery, high-speed rail, construction machinery, boilers, fans, elevators, stone saw blade substrates, etc.

Brand Name: Ark Steel Place of Origin: China Outside Diameter: 6.0-60.3mm Wall Thickness: 0.6-6.0mm Length: Up to 25m Standard: A213, A312, A789, A268, A179, A192, EN10216, etc. Grade: TP304, TP304L, TP316, TP316L, T5, T9, T11, T22, etc. Delivery Condition: Pickled, Polished, Bright Annealed Technique: Seamless/Welded Application: Heat exchanger, boiler, cooler, heater, etc. Marking: LOGO, Standard, Grade, Size, Heat Number. Package: Woven bag, wooden cases, or as per customer's requirement. Certification: ISO Shape: Round Pipe Tube Payment Term: T/T Price Term: FOB CIF CFR Market: Global Quality Requirement: Mill Test Certificate (EN 10204/3.1); Third Part Inspection is acceptable. ARK STEEL Manufactures below PIPE&TUBE: Ferrite/Martensite: TP410, TP405, TP420, TP430, TP430Ti, TP403, TP409, TP444, TP439, TP446, etc. Austenitic/Super Austenitic Steel Grade: 304/304L, 316/316L, 314, 321, 347H, 316Ti, 316LMod, 317L/N, 310S, 253mA, 330, 904L, S31254, XM-19, etc. Duplex/Super Duplex Stainless Steel: S31803, S32304, S31500, S32550, S32750, S32760, etc. Alloy Steel Grade: T1, T1a, T2, T5, T9, T11, T12, T17, T21, T22, T23, T24, T36, T122, P12, P5, P91, 15Mo3, 12CrMo, 15CrMoG, 1Cr5Mo, 27SiMn, 09Cr2AlMoRe, 09CrMoAl, 13CrMo44, 10CrMo9-10, 09CrCuSb, 09MnNiD, 09MnD, 09CuPCrNi, 07Cr2AlMo, etc. Carbon steel tube: A179, A192, A210, DIN17175, etc. Nickel Alloy Grade: N02200/2201, N04400, N06600, N06601, N06625, N06852, N06219, N06690, N08800/8810/8811, N08825, N08028, N08535, N08904, N08925, N08926, N010276, N06022, etc. Last but not least, Small diameter precision stainless steel tube size like 4.76X0.71mm, 6.35X0.71mm, 9.53X0.71/0.89mm, and Ultra Length reach 500meter in coil or straight. Welcome to cooperate with us to flourish together!

We Ultra Febtech - An ISO 9001:2008 Certified Company Engaged in Manufacturing of Guar Gum Plants Machinery to Convey the Material.The plant has been configured and designed in such a way that minimum work force will require. The guar split will be fed in to the pneumatic system to feed in to the turbo screen. The turbo screen is suggested at the high of plant. The screening will be employed for the removal of foreign matter. This screened material will be stored in a storage hopper. The guar splits will fall from the screens by gravity to the storage hopper, which is configured below the screen. From storage hopper material can be taken in to double cone mixer as and when required by gravity for the rehydrating of guar splits. All the rehydrated guar split will be sent to the hopper of Flakers at a time by gravity. Flakers will crush the guar splits and crushed guar splits will go into the ultrafine grinder at the uniform rate. Ultrafine grinder is proposed for the grinding of crushed guar splits. This grinder has ability to grind the material without generating too much heat. Material will be fed into the dryer. Oil will be the media to convey the heat and deliver to the air. This hot air will take the material into the dryer line where actual drying will take place. Attached cyclone system will separate the material and hot air. To heat the oil Thermal boiler will be used. The material will be screened through centrifugal screen. Material passing through the screen will be again screened through turbo screens as additional control. This material will be sold as a premium product. Oversize of the centrifugal screen will be screened through turbo screen to separate another grade in terms of particle size followed by additional screening. The oversize will be screened through another turbo screen to separate another grade. Oversize will be passed through another grinder. The material will be passed through another screen. Oversize will be recycled to the same grinder. Final material coming out from all the screens will be sent separately by gravity in to the Nauta mixer for the blending and to make a uniform lot. The products will be tested and packed. The plant can be operated by 2 skill workers in a shift. The loading/unloading and the packing of the final product can be done on contract basis.

We Ultra Febtech - An ISO 9001:2008 Certified Company Engaged in Manufacturing of guar gum plants machinery to Convey the Material.The plant has been configured and designed in such a way that minimum work force will require. The guar split will be fed in to the pneumatic system to feed in to the turbo screen. The turbo screen is suggested at the high of plant. The screening will be employed for the removal of foreign matter. This screened material will be stored in a storage hopper. The guar splits will fall from the screens by gravity to the storage hopper, which is configured below the screen. From storage hopper material can be taken in to double cone mixer as and when required by gravity for the rehydrating of guar splits. All the rehydrated guar split will be sent to the hopper of Flakers at a time by gravity. Flakers will crush the guar splits and crushed guar splits will go into the ultrafine grinder at the uniform rate. Ultrafine grinder is proposed for the grinding of crushed guar splits. This grinder has ability to grind the material without generating too much heat. Material will be fed into the dryer. Oil will be the media to convey the heat and deliver to the air. This hot air will take the material into the dryer line where actual drying will take place. Attached cyclone system will separate the material and hot air. To heat the oil Thermal boiler will be used. The material will be screened through centrifugal screen. Material passing through the screen will be again screened through turbo screens as additional control. This material will be sold as a premium product. Oversize of the centrifugal screen will be screened through turbo screen to separate another grade in terms of particle size followed by additional screening. The oversize will be screened through another turbo screen to separate another grade. Oversize will be passed through another grinder. The material will be passed through another screen. Oversize will be recycled to the same grinder. Final material coming out from all the screens will be sent separately by gravity in to the Nauta mixer for the blending and to make a uniform lot. The products will be tested and packed. The plant can be operated by 2 skill workers in a shift. The loading/unloading and the packing of the final product can be done on contract basis.